MP-Man NT12 User manual

For Model No.
NT12
EN User Manual

Features
Browse the Web.
Visit your favorite websites
Check your e-mail
Keep in touch with friends and family
Watch YouTube™ videos
Browse the world’s most popular
video-sharing community
Read your favorite books
Download thousands of books .
Discover many Windows app
Connect to the Internet wirelessly
High-speed Wi-Fi 802.11 b/g/n networking
Enjoy your media library anywhere
Portable powerhouse plays popular music,
video,and photo formats
TF card increases your storage capacity
(up to 32 GB supported)
Built-in camera
Convenient front-facing and rear camera
Automatic orientation detection
Read any way you want; the display adjusts
automatically!

Unit at a Glance
1
2
3
4
5
67
810
9
Delete
6. USB
7. TF CARD
8. MIC
9. REAR CAMERA
10.REST
1. POWER
3.
2. DC IN
USB
4. HDMI
5. HeadphoneI

Safety
Read these simple guidelines carefully and follow all instructions.
road safety comes first
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first
consideration while driving should be road safety.
interference
All wireless devices may be susceptible to interference,
which could affect performance.
qualified service
Only qualified personnel may install or repair this
product.
batteries, chargers, and other accessories
Use only batteries, chargers, and other accessories
approved by MPW102CL for use with this device.
keep your device dry
Your device is not water-resistant. Keep it dry.
glass parts
The device screen is made of glass. This glass can break
if the device is dropped on a hard surface or receives a
substantial impact. If the glass breaks, do not touch the

Charging the Battery
Charging the Battery
The tablet has a built-in battery and the battery comes partially
charged. You must fully charge the battery before using your device
for the first time. After the first charge, you can use the device while
charging. Always charge the battery using the 5V/2A power adapter
provided.
Charging via power adapter
Connect the standard USB end of the USB cable to the power
adapter. Connect the Micro-USB end of the USB cable to your tablet.
Then plug the power adapter into the mains socket.
OR
Charging via the USB cable
Connect the standard USB end of the USB cable to your PC. Then
connect the Micro-USB end of the USB cable to the port of the
tablet.
An indicator light above the power button will illuminate,
indicating charging is in progress.
Indicator light
Power button

If the battery is completely discharged, you cannot turn on the
device, even with the USB power adapter connected. Allow a
depleted battery to charge for a few minutes before you try to turn
on the device.
Note: You cannot sufficiently charge the battery using the USB
cable and your PC due to incorrect current.
To check the battery status, tap the battery icon on the bottom of
the screen.

Turning the Tablet On or Off
refer to actual screen drawings.
To turn on your tablet
1. Press and hold for about 2 seconds to turn on your tablet.
2. If the lock screen image displays, swipe your finger from the
bottom of the display
to switch to the login screen, and then enter password to log in to
Windows.
·Please first create a Microsoft account.
The tablet is ready for use after the Windows Start screen displays.
To turn off the screen
·When the tablet is turned on, press to turn off the screen
to save battery
power.
·Or you can swipe from the right edge of the display to access
the menu. Tap All
Settings to display the settings. Tap System→Power &Sleep to
set the screen to
The following screen drawings are only for reference and please

be turned off after a set time period.
NOTE: If your tablet is in a sleep state, press or tap home button
to turn on the screen.
To turn off the tablet
·Press and hold until you see “Slide to shut down your PC” on the
screen.
Slide to shut down your tablet.
·You can also turn off the tablet in desktop and
tablet modes:

In desktop mode, tap on the bottom of the screen to access the
menu.
Tap Power→Shut down to turn off the tablet.
To turn off the tablet in tablet mode, first enable the tablet mode by
swiping
the screen from the right to access the menu. In addition to the action
center, it also allows access to general settings like airplane mode,
rotation lock, and Wi-Fi.
Tap Table mode to enable the tablet mode. Tap Power→Shut down to
turn off the tablet.

Built-in Applications
Windows 10 comes with built-in apps like Map, Photos, Mail &
Calendar, Music and
Video. And these apps use OneDrive to back up your information
and sync
seamlessly across your Windows 10 devices, so you’re never far from
what you need.
Connecting Your Tablet to
a Wi-Fi Network
1. Tap the Wi-Fi symbol on the bottom of the screen. Tap Wi-Fi to
enable the Wi-Fi
function.
·A list of available wireless networks will appear.
2. Tap a network to connect to it.
3. If you want your tablet to automatically connect to the network
when it’s
available, tap Connect automatically.
4. Tap Connect.
5. If prompted, type your network security key (network password),