Mr. Herzher's Deluxe Pet Residence User manual

Deluxe Pet Residence
•
Mr. Herzher’s • 480 North Dean Road, Suite E, Auburn, AL 36830 • Phone [phone] • www.mrherzher.com
ASSEMBLY INSTRUCTIONS
• Gradually acquaint your pet with his new home.
• Encourage your pet to go into his new home on his own. Don’t force him.
• At rst don’t close the door, let him go in and out on his own.
• Place familiar items in the home like soft, comfortable bedding or a favorite toy.
• Never punish you pet by putting or forcing him into his home.
• Your pets home should be his secure safe place, not associated with punishment.
• Not a training crate nor intended for puppies.
• Not for dogs with behavioral problems, especially chronic chewing.
• Limited 1 year warranty
• Clean wood surfaces with furniture polish.
• Clean resin rattan with mild soap and water.
• Patents Pending
• Made in China
Replacement parts available by calling customer service at [phone]
Thank You for your purchase!

Assembly Note
Each interface (joint) has 2 ea. wood dowels for alingment and 1 ea. decorative wood screw
for assembly, as shown below. Decorative wood screws can be installed by hand with allen
wrench or by electric screwdriver with allen bit (both provided).
Verify Contents in Package
Dowel installation Power AssemblyManual Assembly
Contents include: Front panel, back panel, 2 ea. side inset panels, top inset panel, bottom panel,
ABS plastic tray, 2 ea. bottom rails, 2 ea. top rails, and hardware package. Call customer service at
[phone] if any contents are missing or damaged.
Front panel
Top inset panel
Bottom rails - 2 ea. Top rails - 2 ea. Hardware package
Bottom panel Plastic tray
Side inset panels - 2 ea.Back panel

Step 1
Step 2
Step 3
Locate and match 2 ea. bottom rails with
bottom panel as shown. Note: Bottom rails
have a groove on one side and holes on the
adjacent side for insertion of bottom panel.
Groove for accepting side inset panel
should be facing up.
Attach bottom rail and bottom panel assembly
to back panel as shown using dowels and wood
screws provided.
Locate and carefully install 1 ea. side
inset panel into grooves of bottom
rail and back panel.

Step 6
Step 5
Step 4
Mr. Herzher’s • 480 North Dean Road, Suite E, Auburn, AL 36830 • Phone [phone] • www.mrherzher.com
Locate and install 1 ea. top rail to
back panel using dowels and wood
screws provided as shown. Repeat
Steps 3 and 4 for opposite side.
Locate and carefully install top inset
panel within grooves of top rails and
front panel as shown.
Remove front door from front panel. Install
front panel to existing assembly using
dowels and wood screws. Install plastic tray
and re-install door. Enjoy!
Please!
Call customer service at (334) 821- 7800 for any
assistance, questions or concerns.