Frisco CERAMIC WHALE DOG & CAT WATER FOUNTAIN User manual

FRISCO CERAMIC WHALE
DOG & CAT WATER FOUNTAIN
INSTRUCTION MANUAL
and prior to assembling back on.
Give the fountain parts a quick rinse and dry at least every 2 weeks to ensure optimal
operation of your pet fountain.
part
injuries.
Filter & Filter holder Foam Pre-filter Pump with Cable Power Adapter
Keep any packaging materials away from children and pets.
Avoid storing fountain near shocking or vibrating objects
Only the pump is waterproof. Never immerse the power adapter in water or other liquids.
MAX
MIN
Base Hose Pump holder Cover plate
Whale parts
Upper cover

IMPORTANT
Pump incorporates a low water level sensor.
The pump automatically stops operating when bowl water level is below the
minimum level.
MAX
MIN
MAX
MIN
MAX
MIN
STEP1- INSTALL THE WATER PUMP
AND CABLE
STEP2- LOCATE THE SLIDER ON
THE PUMP
STEP3- PUT FOAM PRE-FILTER
INTO PUMP HOLDER
STEP4- COVER THE COVER PLATE
STEP5- INSERT FILTER INTO THE
PLASTIC HOLDER
STEP6- PUT WHALE INTO THE HOSE
AND INSERT HOSE INTO UPPER COVER
STEP7- INSTALL THE PUMP RACK
ON THE COVER AS A WHOLE
STEP8- RUN THE USB THROUGH
THE BASE HOLE
STEP10- CONNECT TO THE POWER
UP SUPPLY
DO NOT CONNECT TO POWER USB
UNTIL THERE IS WATER POURED
INTO THE FOUNTAIN.
TIP: The recommended starting default
location of this product is the lowest one.
STEP9-FILL BASE WITH CLEAN
WATER
Fill the clean water to the water
level between MIN and MAX on the water
level indicator.