Prevue Hendryx Dark Tower 7364 User manual

]P41
]P42
]P44
]P2
]P12
]P11
]P43◆
]Hp
Uµ4
]Hp
Lµ4
]B
]Hr
U
]Hc
U
]Hb
L
]Hr
L
]Hc
L
]Hb
U
]Pl
]Ps
]Db
7364—05/23—A4.1 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Phillips-hea Screw
16 pieces
Short Screws
A = 28mm L
B = 24mm L
Long Hex Screw
7 pieces
Screw Post
2 pieces
HARDWARE :
TOOLS NEEDED :
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact revue et roducts:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
Dark Tower
PARTS LIST
Instructions online at www.prevuepet.com
7364
MODEL
#
included
not included
Phillips-hea
screw river
Hex Key
HRU= Hideaway Roof - upper
HRL= Hideaway Roof - lower
HCU= Hideaway Cover - upper
HCL= Hideaway Cover - lower
HBU= Hideaway Base - upper
HBL= Hideaway Base - lower
H U= Hideaway ost - upper
Four osts: 8" / 20,3 cm
HL=Hideaway ost - lower
Four osts: 10⅜" / 23,8 cm
KEY:
1 = Two osts: 19" / 48,2 cm
2 = One ost: 13¼" / 33,6 cm
3 = Two osts: 11¾" / 30 cm
4 = Four osts: 8¼" / 21 cm
DB = Daybed
S = latform - small
L = latform - large
B=Base
These parts are
interchangeable:
P11 =P12
P41=P42=P44
Hp
Uall 4 posts
Hp
Lall 4 posts
⁕
]P32]P31◆
◆indicates ends without
an Integrated Screwpost
1 2 3 4 H -U H -L
AB

7364—05/23—A4.2 For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
REQUIRED:
Phillips-head
screwdriver
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact revue et roducts:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [e-mail]
Dark Tower
ASSEMBLY
Instructions online at www.prevuepet.com
TOOLS REQUIRED: Hex Key (included) & hillips-head Screwdriver (not included) • Follow the Assembly Steps in the order presented.
1PIECES
7364
MODEL
#
⁕
]Hc
U
]Hc
L
]Hr
U
]Hr
L
]Hb
U
]Hb
L
]Hp
Uµ4
]Hp
lµ4
interchangeable
interchangeable
x 16
NOTE: Countersunk
holes face UP
NOTE: Countersunk
holes face UP
NOTE: Offset through-hole
(for daybed ost)
NOTE: Center
hole with
threaded
insert
NOTE: Center through-hole
NOTE: Entire roof
anel is
uncoated
NOTE: Entire roof anel
is uncoated
NOTE: Base (to ) has
fabric on to and
side surfaces
NOTE:
Base (to ) has
fabric on to and
side surfaces
NOTE: Base (bottom)
has countersunk holes
and threaded screw
holes in the corners
NOTE: Countersunk
holes face DOWN
[3ull the cover down
under the base. The
elastic will pull the
cover tight. Align
seams with corners.
[3ull the cover down
under the base. The
elastic will pull the
cover tight. Align
seams with corners.
[1assemble the upper
hideaway as illustrated
using phillips-head screws.
[1assemble the lower
hideaway as illustrated
using phillips-head screws.
UPPER HIDEAWAY
LOWER HIDEAWAY
base roof
base roof
2Align the holes
in the hideaway
roof and cover
fabric.
2Align the holes
in the hideaway
roof and cover
fabric.

7364—05/23—A4.3 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
x 3 long
x 1
x 1 long
x 1
twist the P4 posts into the
threaded holes on the left end
of the top hideaway base
twist the P1 posts into
the threaded holes on
the right end of the base
[1add the screwpost to
the back left corner
scratching post
[2add the short platform
onto the screwpost;
twist the P4◆post onto
the exposed end of the
screwpost
[3attach the middle post
to the platform with a
long hex screw
[4twist the P4 post into
the threaded hole
[1add the screwpost to
the back right corner
scratching post
[2add the platform onto the
screwpost; twist the P3◆
post onto the exposed end
of the screwpost
[3twist the remaining P3
post into the threaded hole
in the top right corner
2PIECES
long
3PIECES
Add first
Add last
Add second
2
{1
{3
Add last
{4
{3
re-assembled u er
hideaway from STEP 1
]Pl
]P3
1
]P1
2
]P1
1
]P4
1
]P4
2
]P4
3
]P4
4
]P3
2
Add
first
Add second
2
{1
]Ps
◆indicates end without
Integrated Screwpost
...continued ↗

7364—05/23—A4.4 For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
3...continued
x 2 short
x 2 long
x 1 long
[1attach the post to the
hideaway
[2spin the daybed onto
the screwpost
[4attach the remaining
posts to the platform
with long hex screws
[1attach the pre-assembled
hideaway from Step 1 to the
base with short hex screw (A)
←
[2attach the hideaway/base unit to
the full tower with: the shortest hex
screw (B) through the hideaway roof into
the platform; long hex screws through
the base into the scratching posts.
↙
long
long
long
long
long
long
short
Assembly completed. {
4PIECES
5PIECES
Add first
Add
second
1
{2
{4
{1
{2
]P2
]Db
re-assembled lower
hideaway from STEP 1
]B
A
A
B
B
short