MrCool Advantage Series User manual

Please read this manual carefully before installation and keep it for future reference.
User Manual
Please keep this manual where the operator can easily find it. Inside
you will find helpful hints on how to use and maintain you unit.
Advantage Series

When using this air conditioner in the European Union, the following informations must be followed:
DISPOSAL:
possibilities:
READ BEFORE OPERATION
1
For more details visit www.MrCool.com

SAFETY PRECAUTIONS
NAMES OF PARTS
Indoor unit .................................................................................................................................
Outdoor unit ..............................................................................................................................
Display window ..........................................................................................................................
OPERATING INSTRUCTIONS
Manual operation ......................................................................................................................
How the air conditioner works ................................................................................................
Special functions ........................................................................................................................
CARE AND MAINTENANCE
Before maintenance...... ............................................................................................................
TROUBLESHOOTING TIPS
3
4
5
5
5
6
6
7
9
11
11
11
12
12
13
14
2
For more details visit www.MrCool.com
CONTENTS

shock.
before you start to clean it.
this unit.
repair or maintenance of this unit.
use of the appliance by a person responsible for
their safety.
they do not play with the air conditioner.
cable.
room such as a bathroom or laundry room.
WARNING
Strictly prohibited.
Be sure to follow the instructions.
WARNING
CAUTION
SAFETY PRECAUTIONS
3
For more details visit www.MrCool.com

accordance with the local codes.
may cause an electric shock.
the intended use.
emitted air.
CAUTION
SAFETY PRECAUTIONS
4
For more details visit www.MrCool.com

Names of parts
Indoor unit:
1. Front panel
2. Air inlet
4. Air outlet
7. Display window
Outdoor unit:
NOTE:
All the pictures in this manual are for explanation
purposes only. The actual shape of the indoor unit
and display window. The actual shape shall prevail.
Display window
conditioner is operational.
ON
OF
set.
OF
dF
cF
SC
applicable).
FP
applicable).
(Optional)
°F”
Display window
Energy saving display (optional):
WIFI control display (optional):
function.)
NOTE:
A guide on using the infrared remote is included in
this literature package.
Air inlet (rear)
Air inlet (side)
Air inlet
Air outlet
Air outlet
4
3
5
2
6
1
9
1 0
8
7
46.4 F
NAMES OF PARTS
5
For more details visit www.MrCool.com
°

Mode
Temperature
Roomtemperature
Outdoor temperature
Coolingoperation Heating operation Drying operation
(17°C~32°C)
62°F~90°F
(0°C~30°C)
32°F~86°F
(10°C~32°C)
50°F~90°F
(-15°C~30°C)
5°F~86°F
(0°C~50°C)
32°F~122°F
(0°C~50°C)
32°F~122°F
5°F~122°F / -15°C~50°C
(For the models with low
ambient cooling system)
NOTE:
1. Optimum performance will be achieved within these operating temperatures. If air conditioner
is used outside of the above conditions, certain safety protection features might come into
operation and cause the unit to function abnormally.
2. If the air conditioner runs for a long time in cooling mode and the humidity is high (over 80%),
Suggestion:
32°F (0°C), we strongly recommend you to keep the machine plugged in order to guarantee it
running smoothly.
Operating temperature
Manual operation
maintenance necessary.
Manual
Control
Button
NOTE: The unit must be turned off before operating the manual
control button. If the unit is operational, continue pressing the
manual control button until the unit is off.
1) Open and lift the front panel up to an angle until it remains
fixed with a clicking sound.
2) One press of the manual control switch will lead to the forced
AUTO operation. If the switch is pressed
twice within five seconds, the unit will operate under forced COOL
operation.
3) Close the panel firmly to its original position.
CAUTION:
·
This switch is used for testing purposes only. Please do not use it unless necessary,
·
To restore the remote control operation, use the remote control directly.
OPERATING INSTRUCTIONS
For more details visit www.MrCool.com
6

temperatures.
control.
Perform this function while the unit is in operation.
and down automatically. Please refer to the
IMPORTANT:
the blower and suction side.The high-speed fan inside
may cause injury.
CAUTION
condensation may occur on the surface of the
performance may be reduced due to too
air conditioner.
Range
Range
rod
OPERATING INSTRUCTIONS
7
For more details visit www.MrCool.com

dependent)
AUTO operation
temperature and the room temperature.
automatically to the temperature point you set.
your desired temperature.
SLEEP operation
DRYING operation
HEATING operation
performance is reduced as outdoor air temperature
Optimal operation
torwards people.
closed.
needed.
1hour
1 hour
Set
Temperature
Set
Temperature
Cooling
Heating
SLEEP operation
1 hour 1hour
SLEEP operation
7hours timer
7hours timer
How the air conditioner works
OPERATING INSTRUCTIONS
For more details visit www.MrCool.com
8

Special functions
Refrigerant Leakage Detection (optional)
EC
dependent).
Louver Angle Memory Function (optional)
Self Clean Function (optional)
automatically.
Note:
for about 30 minutes.
Clean Air Function (optional)
Anti-Mildew Function (optional)
Anto-Restart Function (optional)
OPERATING INSTRUCTIONS
9
For more details visit www.MrCool.com

WIFI Control Function (optional)
Air Filter Reminding Function (optional)
CL
CL
CL
nF
nF
nF
Mute Operation (optional)
Press the LED button on the remote control to turn off the screen display and air conditioner buzzer
of the indoor unit, creating a comfortable and quiet environement.
For more details visit www.MrCool.com
10
OPERATING INSTRUCTIONS

Before mainatenance
NOTE: Power supply must be disconnectd before attampting
to clean or service!
CAUTION
the unit.
to crack or deform.
Cleaning the unit
please use the suspension bars to prop up the panel.
FilterTab
lter
CARE AND MAINTENANCE
11
For more details visit www.MrCool.com

left.
and the panel is completely closed.
Preparation for extended non-operation
2. Operate the fan for about half a day to dry the inside of
the unit.
3. Stop the air conditioner and disconnect power.
Pre-season inspection
CAUTION
possible electric shock.
shrink.
Plasma
(optional)
Open the panel and take down the
of the Plasma and lifting itupwards
according to the arrows.
Releasingthe buckles as indicated
with arrows and open the coverof the
with vacuum.
Dust collector )
2
Panel buckles
CARE AND MAINTENANCE
12
For more details visit www.MrCool.com

Operation is delayed
after restart
Fan speed changes
- off, very slow and
then normal
Heating operation
stops suddenly and
defrost-light blinks
Mist coming out of
the indoor unit
Low volume sounds
are emitted by the air
conditioner
Dust discharges
from the unit
Emits a peculiar
odor
Changes to fan only
while cooling or
heating mode
Operation is erratic,
unpredictable or
unresponsive
To prevent blowout of the fuse, the compressor will not operate while
theprotection circuit is working for about 3 minutes after sudden OFF--ON
operation of the power supply.
In HEAT mode, the indoor unit temporarily stops for maximum of 10
minutes to perform the automatic defrosting operation.
May occur when air conditioner is used for the first time or has not been
used for a long time
Various smells generated from interior textile, furniture, or cigarette smoke
absorbed into the air conditioner may be emitted. If not the case, contact a
local dealer or your installation contractor.
Room temperature reaches the temperature setting of the remote control.
If not the case, contact a local dealer or your installation contractor.
Interference from cell phone towers and remote boosters may cause the
unit to malfunction
Disconnect the power and then re-connect.
Press the ON/OFF button on the remote controller to restart operation.
Automatically happens in heating mode :
--prevents cold air blowing onto occupants when heating operation starts
--perform automatic defrosting operation,
--perform low temperature heating operation
In COOL mode, a mist generated by condensation formed with sudden
cooling process may be emitted.
Hissing sound -- during operation or immediately after stopping the air
conditioner, refrigerant flowing sound may be heard
Squeaking sound -- normal expansion and contraction of plastic and
metal parts caused by temperature change during the operation.
Rushing air -- when louver resets its position.
Mist may generate due to moisture from defrosting processwhen the air
conditioner restarts in HEAT mode operation after defrosting.
Symptom Cause
NOTE:
sure to inform them of the detailed malfunctions and unit model number.
13
For more details visit www.MrCool.com
TROUBLESHOOTING

Unit will not operate
Poor cooling or
heating performance
Indicator lamps
continue flashing
Error code appears
in the indoor unit,
such as: E0,E1,E2....
P1,P2,P3.....
or F1, F2,F3.....
-- Is there a power failure?
-- Has a switch been turned off, a circuit breaker tripped or a fuse blown?
-- Is the timer operating?
-- Are the batteries used in the remote controller exhausted?
-- Are the batteries used in the remote controller loaded properly?
-- Are the air filters dirty?
-- Is air flow unrestricted in & out of indoor & outdoor units?
-- Are the temperature and mode settings correct?
-- Are the windows or doors left opened?
-- Is fan speed on high and louvers allowing maximum flow?
-- Is direct or strong sunlight shinning into the room in cooling operation?
-- Is the SILENCE function is activated? Under SILENCE operation,
noise reduction is prioritized and the air-conditioning performance may
become lower.
--
The unit may stop operation or continue to run in a safety condition
(depending on models). Waiting for about 10 minutes, the fault may be
recovered automatically, if not, disconnect the power and then connect it
in again. If the problem still exists, disconnect the power and contact the
nearest customer service center.
-- Are there other heating apparatus or computers operating, or too many
people in the room in cooling operation?
Symptom Diagnostic
DO NOT ATTEMPT TO CORRECT THESE
ITEMS YOURSELF!
CONTACT AN AUTHORIZED SERVICE
PROVIDER!
model number.
CAUTION
immediately!
TROUBLESHOOTING
For more details visit www.MrCool.com
14

Indoor Unit Error Display
Operation
lamp Timer lamp Display LED STATUS
1 time X E0 Indoor unit EEPROM parameter error
2 times X E1 Indoor / outdoor units communication error
3 times X E2 Zero-crossing signal detection error
4 times X E3 Indoor fan speed has been out of control
5 times X E4 Indoor room temperature sensor T1 open circuit or short
circuit
6 times X E5 Evaporator coil temperature sensor T2 open circuit or
short circuit
7 times X EC Refrigerant leakage detection
2 times O F1 Outdoor ambient temperature sensor T4 open circuit or
short circuit
3 times O F2 Condenser coil temperature sensor T3 open circuit or
short circuit
4 times O F3 Compressor discharge temperature sensor T5 open
circuit or short circuit
5 times O F4 Outdoor unit EEPROM parameter error
6 times O F5 Outdoor fan speed has been out of control
1 times P0 IPM malfunction or IGBT over-strong current protection
2 times P1 Over voltage or over low voltage protection
3 times P2 High temperature protection of compressor top
diagnosis and solution(only for 9k,12k models)
5 times P4 Inverter compressor drive error
O（light）X（off） （flash）
TROUBLESHOOTING
15
For more details visit www.MrCool.com

Advantage Series