MSR MUTHA HUBBA NX User manual

81-855
USE TIPS: All tents require staking; unsecured tents are susceptible
to wind damage. In some conditions, additional stakes and cord
may be required. Re-adjustment of stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete care
and use instructions, refer to the Owner’s Manual (available at
www.msrgear.com/MuthaHubbaNX).
MUTHA HUBBA™NX
Assembly Instructions
MOUNTAIN S AFETY R ESEARCH®
© 2016 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
1-800-531-9531 1-206-505-9500
PREPARE FOR SETUP ASSEMBLE TENT FRAME
ATTACH CROSS POLE ATTACH RAINFLY
1. Spread tent out and stake out four corners tightly.
2. Assemble poles.
1. Insert tips of long main poles into grommets at the stake loops.
2. Insert ridge pole into grommets above doors.
3. Attach clips to frame.
1. Insert short cross pole into grommets at tent’s midpoint.
2. Attach clips.
1. Lay rainfly over tent. Attach the rainfly’s midpoint grommets to ridge
pole. Secure rainfly Velcro tabs to main poles.
2. Place rainfly’s adjustable loop grommets under the main pole ends
at corners.
3. Stretch out vestibules until taut and stake down, making sure seams
align with frame.
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes