MSTR BRAND elura SBR1 User manual

model # SBR1
high performance soundbar
Overview.
Thank you for purchasing Elura
speaker products. Elura is a high
performance custom installed prod-
uct engineered for movie and music
enthusiasts. Each Elura product is
manufactured to the highest qual-
ity standard using state of the art
components and built for years of
enjoyment.
Considerations.
Before connecting, mounting or
installing any Elura product, please
read all instructions. Careful con-
siderations should be given to avoid
obstacles such as electrical wires,
plumbing or HVAC products.
If you are unsure or inexperienced
with construction methods, please
consult a professional.
Use the proper tools and pay close
attention to detail while connect-
ing the speaker wires. Make sure
all equipment is powered off while
connecting and disconnecting any
equipment.
Improper use, not following pre-
cautions or instructions may cause
damage to property, equipment, and
possible injury or electrocution.
Features.
• Conveniently replaces front
channel speakers ( L, C, R )
• Can be mounted on the wall,
to an articulating TV bracket, or
placed on a TV stand
• Low profile matches most flat
screen TV depths
• Built with high quality, perfectly
matched, speaker components
• Engineered to work with most
audio and video receiver / ampli-
fiers of 20 to 100W / CH
Contents.
• Elura Soundbar
• Wall Mounting Hardware
• TV Stand Hardware
• All screws, washers needed to
attach the speaker to the hard-
ware supplied
Connections.
Connect the Soundbar to an AV Re-
ceiver or Amplifier using high-quality
14 to 16 gauge stranded speaker
wire. The stripped bare ends of the
speaker wire may be connected di-
rectly to the speaker’s binding
posts. Twist the speaker wire to
avoid strands from shorting from
one connectionto the other and pay
careful attention to polarity (+ / - ).
Note: You will need 3 pairs of
speaker wire to the Soundbar as it
contains the left, center, and right
channels conveniently in one prod-
uct. All connections are located in a
flush mount terminal cup in the rear
of the speaker so that a wall mount-
ed speaker can sit flush on the wall.
See the picture of the connections
below:

model # SBR1
high performance soundbar
Speaker Placement.
The versatility of the Elura Soundbar
offers multiple placement options.
The most popular option is on a TV
stand below the speaker. When
there is wall space, other options
are mounting the speaker on the
wall above or below the TV. Take
precautions to properly mount
the speaker and avoid obstacles
commonly found inside walls. The
hardware for this type of installation
is included.
TV Stand Installation.
The speaker stands included are
required in order for the soundbar to
stand up on a shelf. Minor angle ad-
justments can be made to angle the
sound up or down. In this scenario,
it’s important to note the speaker's
tonal quality can change if its placed
too far back on the shelf. For opti-
mal performance, move the speaker
flush to the front edge of the shelf.
See the picture below for speaker
stand placement and adjustment.
The speaker stands have foam pads
on the bottom in order to avoid
scratchs to the furniture and deaden
vibration. The slot in the bracket
offers slight angle and height ad-
justments. Use the supplied tool to
tighten the hex screw.
On-wall Mounting.
All hardware is included to mount
the speaker to the wall. It is recom-
mended to screw the bracket into a
stud or use drywall anchors appro-
priately suited for the weight. Mount
and level the supplied wall bracket
and use the supplied hardware to
hang the speaker to the bracket.
The soundbar should be mounted
no more than 3” above or below the
TV edge.
See the pictures below showing
hardware and sideview of wall
mounting below.
General Maintenance.
Clean the soundbar with a damp
cloth. The grille can be removed
if needed by pulling in an outward
direction. Use caution to avoid dam-
aging the grille or speaker compo-
nents under the grille.
Warranty.
All Elura products come with a lim-
ited liability warranty. This warranty
includes parts and labor repairs on
all components found to be de-
fective in material or workmanship
under normal conditions of use. This
warranty shall not apply to products
which have been abused, modified
or disassembled.
A speaker that fails under condi-
tions other than those covered will
be repaired at the current price of
parts and labor in effect at the time
of repair. Such repairs are warranted
for 5 years from the day of reship-
ment to the BUYER. If the unit is
delivered by mail, customers agree
to insure the unit or assume the risk
of loss or damage in transit. Un-der
no circumstances will a unit be
accepted without a return authoriza-
tion number. The warranty is in lieu
of all other warranties expressed or
implied, including without limitations,
any other implied warranty or fitness
or merchantability for any particular
purpose, all of which are expressly
disclaimed. Proof of sale may be
required in order to claim warranty.
www.elura.audio