MSUN INDUSTRIAL HQ30 User manual

808 HQ30HDVideoRecorder
InstructionManual
HD720P30fps &VGA60 fps
Function:
HD 720Pvideomode(1280x720@30fps)
VGAvideomode(640x480@60fps)
Camera mode5/3/1.3MegaPixel
Soundrecordingmode
Looprecording mode
PC-cammode:1280x72030fps,VGA@60fps
TV-Cammode: 1280*720 30fps,VGA-60fps
Extension power support
AV-output
SupportedTFcardupto 32GB
Chapter1:GettingStarted
HQ 30Overview
Thisguide describesthe featuresofHQ30.
Statusicons
Theiconsin thestatusspot onthedevicegiveinformationaboutHQ30.
Status icon Whatit means
Red lightChargermodeYou rechargingwhen theRed onelightingand stop full charged.
Green lightVideo mode720PVideo
YellowlightVideo modeVGAVideo

BluelightPicture modeShootpictures
Green&YellowlightSound moderecord sound
Yellow&Bluelightloop modeloop record
Accessories
Thefollowingaccessories are includedwith HQ30.
Connectingcable. UsingUSBCableto connectyourcomputer to syncand charge.
HQ 30 carcharger. Using with USBCableto chargetheHQ30 batterywhenyou are driving.
Multi-function AVcable.To chargeyourHQ30,aswell asTVvideoand audio output.
Note:
Thereare3cablesforthiscamera,theRCAcablewithred&yellowendsusedforA/Vout,theshorter
datacablethatchargesortransfersdata,thelongercarcharger cableused withcarchargertorecordand
chargeatsametime.
Charging:
Inorder toprotectthe battery,pleaseturn off the devicebeforecharging.
GettingStarted
Install thememory card
HQ30 supports up to 32 GBTFmicroSDcard. Thedevice can twork withoutmemorycard.
Takephotos and videos
Camera offers severalphoto, audio and video modes, which letyou shoot720p,VGAvideoand

pictures as well asrecordwhatever sound you like.
Howtouse
Shoot720pvideos
Press thePOWER/MODE button, then thelightis on,
Press thePOWER/MODE button, switch to thegreen lightis on
Next,press theSHUTTERbutton tostartrecording.(thelightwill blink three timeand off,thatmean
thedevice under recording.)
Finally,press theSHUTTERbutton again. (Thatmeans thedevice stop recordingand savefilestoyour
TFcard.)
ShootVGAvideos
1. Press thePOWER/MODE button, then thelightis on.
2. Press thePOWER/MODE button, switch to theyellowlightis on.
3. Next,press theSHUTTERbutton tostartrecording.(thelightwill blinkthree timeand off,thatmean
thedevice under recording.)
4. Finally,presstheSHUTTERbutton again. (Thelightisonagain, thatmeansthedevicestop
recordingand savefiles toyourTFcard.)
Take pictures
1. Press thePOWER/MODE button, then thelightis on.
2. Press thePOWER/MODE button, switch to thebluelightis on.
3. Next,press theSHUTTERbutton toshootapicture.(thelightwill blink three timeand thenoff,
finallythebluelightwill on again, thatmeans thedevice finished shootingpicture .)
4. press SHUTTERbutton foronetime,it willtakeonepicture,ifyouholdthebutton, it cantake3
pictures continuously.
Record
1. Press thePOWER/MODE button, then thelightis on,
2. Press thePOWER/MODE button, switch to thegreen and yellowlightison atthesametime.
3. Next,press theSHUTTERbutton torecord. (thelightwill blinkthree timeand thenoff,thatmeans
thedevice stop recording and savefiles toyourTFcard)
4. Finally,Press theSHUTTERbutton tostoprecording.(Thelightwill on again, thatmeans thedevice
stop recordingand savefiles toyourTFcard.)
Web Cam(memory card excluded)
UsingUSBcabletoconnectyourPC/laptop, openAM-CaporMSN,youcanuseasahigh-end camto
talk withyourfriends.
WebCam(memory cardincluded)
ConnectyourPC viaUSBcable,thePC will readyourcarddirectly.Youneedtopress theSHUTTER
button to switch web-cammode. Press theSHUTTERbutton again and thePC read memorycardagain.

Readmemory cardviayourPC
UsingUSBcabletoconnectyourPC/laptop, press thePOWER/MODEbuttontostart theunit,in
this case,yourcomputercan readyourcard.
Read contentviayourTV
1Atshutoffstatus, useTV-OutcabletoTV,theyellowRCAconnectedtoTVvideoinputport,the
whiteRCAconnectedtoaudio input, turn on theTVto chooseto correspondingInputInterface, startthe
unit bypress thePOWERbutton, theTVwill displaythevideoorphotocontentinthememorycard,
press thePOWERbuttonto browsethenextfile, ifit is avideo oraudio file, pleasepress theSHUTTER
button to playback.
2On browsingTVstatus, press power button for3 seconds, you can operateall function. Includetake
video, photo and record sound.
Setting(parameter)
Createatxtfileand named BESTDVR.txt.(uppercase)
You can typein parameters, forinstance:(All parameter mustbelowercase.)
Example,open byNotepad on PC.
Note:
[date]// Thisisa fixedvalue
2014/06/28 // Setdate
12:13:14 // Settime
Photo=3mvalues=1m,3m,5m//Setphotoas 1.3M ,3M ,5 Megapixels.
Frequency=60 values =50 /60 //Setfrequencyto 60hzor50 hz.
tv=nvalues=p /n//setTVformatas p=PAL, n=NTSC
timestamp=0values =0 /1//Set0=turn offtimestamp 1=turn ontimestamp
workmode=1values =1/2/3/4/5//Setstartmode1=HD, 2=VGA,3=photo ,4=sound, 5=loop
cycle=3values=3/5/10 //Setvideo files length 3=3min, 5=5min,10=10min

led=1values=0 /1// SetrecordLEDwhether flashing0=off, 1=open
vol=3values =0/3// Setrecordwhether sound 0=No sound, 3=ON
start=1values=0/1//SetPress power keyimmediatelyrecord 0=N, 1=Yes
sleep=1values=1/2/3/4// Set Standbytime1=30s2=1m3=3m4=5minutes
ev=0values=-2/-1/0/+1/+2// Set exposurevalue
DownloadBESTDVR.txtConfigurationFile
http://www.msundvr.com/assets/Uploads/BESTDVR.zip
BESTDVR.txt inthe removable disk
LEDindicatortips
1,insertUSB cable,LED1lit ,means it ischarging,ifthelightis offmeans batteryis
fullafter charging.(Theunit cannotbechargedinthework,needofftheunit to charged.)
2,turnontheunit,led4 flash3timesthenshutoff,it means thatbatteryis shortage,now
you needtocharging.
3,turnontheunit,led3flash 3timesthenshutoff,itmeans thatcardisfull,nowyou
needtochangeacard.
4,turnontheunit, LED2/3/4flash3timesatthesametime, shut offmeans nocard.
Pleasefeelfreetocontact with usifyouencounteranytechnicalproblems.
Ifthe manualhasupdate withoutnotice.
E-mail: [e-mail]
Skype:SZJCCHEN
Http://www.msundvr.com