MTHTrains 60ft Streamlined Full Vista Dome Car User manual

This Full Vista Dome is the perfect way to add style to
your RailKing 60' streamlined passenger car set. With
its durable ABS construction and die-cast trucks and
couplers, this dome car was designed for years of
operating enjoyment.
Like M.T.H.'s other streamlined cars, this car comes
fully assembled, decorated, and ready to use right out
of the box. Simply place it on the track and couple it
to a train. It features detailed interiors and an
illuminated interior controlled from track power.
Follow the instructions in this booklet to change the
lights in your 60' full vista dome.
Full Dome Car
60ft
Streamlined
SERVICE & WARRANTY INFORMATION
How to Get Service Under the Terms of the Limited One-Year Warranty
For warranty repair, do not return your product to the place of purchase. Instead,
follow the instructions below to obtain warranty service as our dealer network is not
prepared to service the product under the terms of this warranty.
!First, write, call, e-mail, or FAX M.T.H. Electric Trains ®, 7020 Columbia Gateway
Drive, Columbia, MD 21046 (Tel.: [phone]; e-mail: [email protected];
FAX: [phone]), stating when it was purchased and what seems to be the problem.
You will be given a return authorization number to assure that your merchandise will be
properly handled upon its receipt.
!CAUTION: Make sure the product in its original factory packaging including its
foam and plastic wrapping material so as to prevent damage to the merchandise.
The shipment must be prepaid and we recommend that it be insured. A cover letter
including your name, address, daytime telephone number, e-mail address (if available),
Return Authorization number, a copy of your sales receipt, and a full description of the
problem must be included to facilitate the repairs. Please include the description
regardless of whether you discussed the problem with one of our service technicians
when contacting M.T.H. ® for your ReturnAuthorization Number.
!Please make sure you have followed the instructions carefully before returning
any merchandise for service.
Limited One-Year Warranty
All M.T.H. ® products purchased from an Authorized M.T.H. Train Merchant are
covered by this warranty.
See our web site at www.mth-railking.com or call 1.888.640.3700 to identify anAuthorized
M.T.H. Train Merchant near you.
M.T.H. products are warrantied for one year from the date of purchase against defects in
material or workmanship, excluding light bulbs and traction tires. We will repair or replace
(at our option) the defective part without charge for the parts or labor, if the item is returned to
M.T.H. Electric Trains ® within one year of the original date of purchase. This warranty does
not cover damages caused by improper care, handling, or use. Transportation costs incurred
by the customer are not covered under this warranty.
Items sent for repair must be accompanied by a return authorization number, a description of
the problem, and a copy of the original sales receipt from an Authorized M.T.H. Train
Merchant, which gives the date of purchase. Call 410.381.2580, fax [phone], or e-
mail the Service Department at [email protected] to obtain a return authorization
number.
This warranty gives you specific legal rights, and you may have other rights that vary from
state to state.
Service Department
M.T.H. Electric Trains ®
7020 Columbia Gateway Drive
Columbia, MD 21046-1532
www.mth-railking.com
© 2001 M.T.H. Electric Trains, 7020 Columbia Gateway Drive, Columbia Maryland 21046-1532
M.T. H.
7020 Columbia Gateway Drive
Columbia, MD 21046-1532
www.mth-railking.com
ELECTRIC TRAINS

STEP
22
INSTRUCTIONS
Note that different sized screws are used in this
assembly. It is very important that you remember where
each screw came from and replace it correctly. To help
you with the different size screws, please refer to the
screw chart on this page.
Turn the car over, padding it carefully to avoid scratches.
Remove the small Phillips screw that is holding the
ground wire in place from each truck (two screws total).
Release one wire from under the screw, and pull the
other wire from its connection to the pick-up roller
assembly of each truck.
!Remove the four recessed mounting screws located at
the corners of the car.
!Turn the trucks so that you can reach the interior-
mounting screw located under each truck (two screws
total), and remove them.
!Pop the roof off the car by holding each end of the car
and twisting them in the opposite direction, then gently
remove the roof and interior from the chassis, pulling the
loosened wires completely free from the chassis as you
lift.
!Turn the interior over and remove the four screws from
the bottom to separate the two levels of the interior.
Replace the two lower light bulbs by tilting their housing
and popping them out like Christmas tree lights.
!Remove the four screws on the bottom of the upper
interior to remove the roof. Pull it off and replace the
four bulbs by popping them out like Christmas tree lights.
Reassemble the car in the reverse order, making sure that
the interior is placed inside the body the right way. If it is
backwards, a post will show through a window when
looking at the side view. (See figure 7)
Take care that wires are not pinched upon reassembly
and that when you reconnect them to the trucks, they do
not rub against a wheel, as pinched or rubbed wires can
cause shorts.
You can obtain replacement bulbs directly from the
M.T.H. Parts Department (phone: [phone]; e-mail:
[email protected]; mail: 7020 Columbia Gateway
STEP
11
STEP
33
STEP
44
STEP
55
STEP
66
STEP
1
Remove Small Screw
Remove Recessed
Mounting Screws
Remove Recessed
Mounting Screws
Pull Wire from Connection
Interior Mounting Screw
k
c
u
r
T
n
r
u
T
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
Remove Interior
Mounting Screws
Remove Interior
Mounting Screws
Remove Roof
Mounting Screws
Remove Roof
Mounting Screws
Make Sure This Post Doesn’t
Show Though the Window
A
B
Figure 7
A
B
Connecting Areas Screw Chart
Upper and Lower interior M2.6 x 8.0mm
Upper interior & Roof M2.6 x 8.0mm
Lower interior & Body M2.6 x 6.0mm
Body & Roof
Ground Wire
M3.0 x 8.0mm
M2.6 x 4.0mm
Size # of Screws
4
4
2
4
2
A
A
B
C
D
AB
CD