MTHTrains Tinplate IVES 3243R User manual

Compatibility
This engine will operate on any
traditional Standard Gauge tubular track
system, including M.T.H.’s tubular track.
It is also compatible with most standard
AC transformers. (See page 7 for a
complete list of compatible transformers
andwiringinstructions.)
PLEASE READ BEFORE USE AND SAVE
Tinplate IVES 3243R
Electric Locomotive
OPERATOR’S MANUAL (TRADITIONAL)
By MTH Electric Trains®
INPLATE
TINPLATE T
®
RADITIONS
TRADITIONS T
And Passenger Set

Table of Contents
Set Up Checklist...........................................................................................................
Lubrication.......................................................................................................
Couplers...........................................................................................................
Basic Operation.............................................................................................................
Maintenance...................................................................................................................
Lubricating and Greasing Instructions.........................................................
Cleaning The Wheels, Tires and Track.........................................................
Headlight Replacement Instructions.............................................................
Light Bulb Replacement..................................................................................
Transformer Compatibility and Wiring Chart..............................................
Service & Warranty Information.................................................................... 9
CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 - 16.
As with all electric products, precautions should be observed during handling and use to reduce the risk of electric shock.
WARNING:Whenusingelectricalproducts,basicsafetyprecautionsshouldbeobserved,includingthefollowing:
Readthismanualthoroughlybeforeusingthisdevice.
lM.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment
periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary
cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until
properlyrepaired.
lDonotoperateyourlayoutunattended. Obstructedaccessoriesorstalledtrainsmayoverheat,resultingindamagetoyourlayout.
lThistrainsetisintendedforindooruse. Donotuseifwaterispresent. Seriousinjuryorfatalitymayresult.
lDonotoperatethehobbytransformerwithdamagedcord,plug,switches,buttonsorcase.
3
3
3
4
5
5
6
6
7
8
This product may be protected by one or more of the following patents:
6,019,289; 6,280,278; 6,281,606; 6,291,263; 6,457,681; 6,491,263; 6,604,641;
6,619,594; 6,624,537; 6,655,640.
©2005, M.T.H. Electric Trains, Columbia, MD 21046

Set Up Checklist
- Lubricate the locomotive
- Apply power to run as described in the Basic Operating Section of this manual.
Lubrication
You should lubricate the engine to prevent it from squeaking. Use
light household oil and follow the lubrication points marked “L” in
Fig. 1. Do not over-oil. Use only a drop or two on each pivot point.
Couplers
The couplers on your Ives 3243 R Electric Locomotive are faithful reproductions
of the couplers that were originally supplied with the Ives 3243R. They are
designed to couple with Ives rolling stock.
Tinplate IVES 3243 R Electric Locomotive
3
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Figure 1. Lubrication Points on the Locomotive
Lubricate Pick Up Rollers Axles (L)
Lubricate Wheel Axles (L) Lubricate Wheel Axles (L)
Bushings

Basic Operation
The Throttle knob controls how fast your train will travel.
Turn the throttle knob up ½-way, until the engine lights shine bright.
Put the engine into motion by pressing the Direction button on your transformer
once. (hold it for approximately 1 second)
If the engine does not begin to move as soon as you firmly press the Direction
button, you may not have sent enough voltage to the track to make the train move.
Turn the throttle up a bit higher until the train begins to move.
Cycle Phases
Neutral
Neutral ForwardReverse
Tinplate IVES 3243 R Electric Locomotive
4

Tinplate IVES 3243 R Electric Locomotive
5
Maintenance
Lubricating and Greasing Instructions
The engine should be well oiled and greased in order to run properly.
Regularly lubricate all axles and pickup rollers to prevent squeaking.
Use light household oil, such as that found in M.T.H.'s maintenance
kit. Do not over oil. Use only a drop or two on each pivot point.
The locomotive’s internal gearing was greased at the factory and should not need
additional grease. However, it will be necessary to lubricate the idler gears located
next to the drive wheels with grease every 25 hours of operation. Follow the
greasing points illustrated in Figure 3.
Use a light household oil for lubrication. Apply oil sparingly, using a toothpick or
small applicator. Add a drop of oil to the axle holes in the front and rear of each
wheel, to each side of the pickup roller axle, and above and below the clip on the
coupler arm pivot (see Figure 4, below). Wipe away excess oil with a cotton swab.
Figure 3
Figure 2
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Lubricate Pick Up Rollers Axles (L)
Lubricate Wheel Axles (L) Lubricate Wheel Axles (L)
Bushings
Grease Idler Gear (G)
Figure 4
Lubricate Wheel Axles
Lubricate Pick Up Rollers