Muck-Truck E Truck Specifications

BATTERY OPERATED
PEDESTRIAN DUMPER
OWNERS & OPERATIONS
INSTRUCTION MANUAL
muck-truck
It doesn’t cost the earth to move it!

CONGRATULATIONS!!
And thank you for purchasing a new E Truck.
We have done our utmost to ensure your E Truck will be the most trouble free and
productive machine you will ever use. Please read the operators manual carefully before
using your E Truck.
If you would like help or have any questions
Please have the following relevant information before you call us
Date of purchase:
Serial number:
Dealer/Distributors name:
CERTIFICATE OF CONFORMITY
THE UNDERSIGNED MUCK-TRUCK UK LTD.
WE DECLARE THAT THE BATTERY OPERATED PEDESTRIAN DUMPER TRUCK
CATEGORY……. ……. BATTERY POWERED – PEDESTRIAN DUMPER
MODEL …………………E TRUCK.
CONFORMS WITH THE ESSENTIAL HEALTH & SAFETY REQUIREMENTS OF THE EEC
DIRECTIVE 2006/42/EC; ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2004/108/EC;
LOW VOLTAGE DIRECTIVE 2006/95/EC; SAFETY OF MACHINERY EN ISO 12100-1:2003 +
A1:2009; MECHANICAL VIBRATION ISO 5349 AND ASSOCIATED HARMONISED STANDARDS,
WHERE APPLICABLE. NOISE EMISSIONS CONFORM TO DIRECTIVE 2005/88/EC AMENDED
BY 219/2009 FOR MACHINES UNDER ARTICLE 12. THE NOTIFIED BODY IS AV TECHNOLOGY
LIMITED, AVTECH HOUSE, BIRDHALL LANE, CHEADLE HEATH, STOCKPORT, SK3 0XX,
ENGLAND.
H.A.V.s
Left hand - XXX m/s2
Right hand - XXX m/s2
YEAR OF MANUFACTURE – 2018
NAME & SIGNATURE OF TECHNICAL MANAGER MUCK TRUCK UK LTD.
Terry Rowlands

NOTES

NOTES

HINTS FOR SAFE OPERATION
DO Study this manual before operating your E Truck.
DO Check all nuts, bolts, and wheel studs weekly.
DO Be safety conscious and dress appropriately when operating your
E Truck. Always wear substantial footwear and a hard hat in relevant areas.
DO Exercise extreme caution with the controls when working on steep or slippery
surfaces. Especially, when people are near to the working area.
DO Ensure that all safety guards are in place when operating the E Truck
ATTENTION
DO Keep the E Truck free of any accumulation of dirt, grease, oil or other
ammable material.
DO After use, connect the truck to the supplied battery charger. The battery
charger should be left powered up and connected to the E Truck until the
E Truck is next used. This will ensure that the batteries are fully charged when
the truck is next to be used.
Note that there is an inhibit on the drive motor whilst the battery charger is
plugged into the E Truck socket.
BE SAFE: FOLLOW INSTRUCTIONS AT ALL TIMES.
SAFETY
DO NOT Allow anyone lacking in experience to operate your E Truck.
DO NOT Carry “passengers”on your E Truck.
DO NOT Start work without completing the daily maintenance checks.
DO NOT Operate the E Truck without exercising appropriate safety precautions.
DO NOT Use other types of battery charger or batteries.

ATTENTION
DO NOT Pressure wash directly onto the trucks electronics.
BE SAFE: EXERCISE COMMON SENSE AT ALL TIMES.
OPERATING INSTRUCTIONS:
GETTING STARTED:
1. Using the battery charger supplied, charge the batteries until the green,
“ready” light on the charger comes on.
TO MOVE FORWARD:
1. Switch the on/o button to ON. The switch will illuminate.
2. Select “FORWARD” on the rocker switch on the electrical box.
3. Grip the handlebars and pull up on the left hand lever. The parking brake will
be automatically released and the E Truck will start to move. The more the
lever is raised, the faster the E Truck will move.
TO REVERSE:
1. Release the left hand throttle lever to stop the E Truck.
2. Move the rocker switch to “REVERSE”.
3. Grip the handlebars and pull up on the left hand lever. The more the lever is
raised, the faster the E Truck will move.
TO STOP:
Release the throttle lever. The E Truck will slow down and stop. After a short
delay the parking brake will automatically come on.
After 10 minutes of inactivity, the controller will power down. The on/o
switch must be pushed to o and back on again to activate the truck.

WARRANTY
E Truck SERIAL No –
12 Calendar months from date of sale for Consumers.
90 Days for units used in the Commercial sector.
Under the following conditions
lRoutine maintenance undertaken in accordance with Owners Manual.
lReturned defective parts are approved by muck-truck UK Ltd.
lMachine is not abused or operated with known faults or lack of maintenance.
lRepairs are in accordance with muck-truck UK Ltd.
AT AN AGREED JOB RATE
Only defective parts are covered & not wearable components that necessitate
replacement through normal wear & tear, i.e. puncture, chipped paint, dented
hopper etc. muck-truck UK Ltd will not be held liable for any consequential losses.
PERSONAL CUSTOMER GUARANTEE STATEMENT
If there is any component, or components, manufactured by muck-truck UK Ltd that
are found to be defective within 12 months from the date of purchase (or 90 days
in the case of a machine used for hire/commercial purposes), muck-truck UK Ltd
undertake to replace the faulty component/s free of charge, (provided that they are
notied immediately upon date of failure).
THE FOLLOWING ARE NOT COVERED BY THIS GUARANTEE
1. A machine which has been subject to operation in excess of recommended
capacities, misuse, negligence or accident, or has been altered or modied in a
manner which has not been authorised by muck-truck UK Ltd.
2. Wear parts, e.g. tyres, cables, batteries etc.
3. Transportation Charge – to and from the warranty repair site.
muck-truck UK Ltd operates a policy of continual development and reserves the right to alter
product specication without giving prior notice.

SPARE PARTS LIST
Part No. Description Part No. Description
TEV12360A Battery MT 14020 Electrical Box
DP03 Handle Bar Grip
PG D51175 Speed Controller MT 14008 Skip Release
DP18 Spring - Throttle/Skip Catch MT 03769 6 cu ft skip
S21136D109 Transaxle MT 14001 Mainframe
DP24 10”Wheel Complete MT 14018 Throttle Lever Plate
PG D50826 Trucharge Gauge MT 14009 Powerdrive Bracket
DP31 Lynch Pin MT xxxxxx Throttle Wire
MT 14025 Electrical Box Decal PB8 Curtis Potbox
MT 14024 Top Decal MT 03943 Throttle/Skip Catch Cable
DP45 4”Wheel DP0502014 Throttle/Skip Catch lever
RS 507 306 Rocker Switch Top RS 2508954040 Charging Plug
RS 507 390 Rocker Switch RS 2508952173 Charging Socket
DP83 19mm Star lock MT 03757 Handlebar
MT 03861 Wheel Hub
1935.3133 ON/OFF Switch
MT 14010 Cowling L.H. MT 03764 Battery Cover
MT 14013 Cowling Top MT 14022 Wiring Diagram
MT 14011 Cowling R.H. EE24/5 or 24/8 Elite 24V Battery Charger
Tyre Pressures
Front Wheel 30 psi
Middle Wheel 30 psi
Rear Wheel 30 psi

MK 5 E TRUCK

TO EMPTY SKIP:
1. Stop the machine and disengage the skip release lever.
2. Jerk both handles upwards; the skip will pivot forward and dump the load with
gravity force.
TO RESET SKIP:
Pull back on the skip and engage the locking catch that holds the skip closed.
NOTE: Check that the locking catch has engaged before moving o.
MAINTENANCE
Routine checks of your E Truck will ensure trouble free operation with less ‘down’
time.
Component Daily Weekly
State of battery charge 4
Control Cables 4
Condition of wiring 4
Tyre Pressure 4
All Nuts/Bolts 4
Remember – A daily check takes only minutes but could save you hours.
Be Proud – look after your E Truck.
TO ADJUST THE CONTROL CABLES
LOOSEN 8mm NUT “B“
TURN ADJUSTER “A” COUNTER CLOCKWISE TO TIGHTEN
THE CABLE. RETIGHTEN NUT “B”
A B

muck-truck USA LLC
2691 SW Domina Road
Port Saint Lucie
Florida 34953
USA
Tel: [phone]
FAX: [phone]
www.mucktruckamerica.com
E-Mail: [email protected]
muck-truck UK Limited
27D Pennygillam Way
Pennygillam Industrial Estate
Launceston
PL15 7ED
United Kingdom
Tel: [phone]
FAX: [phone]
www.mucktruck.com
E-Mail: [email protected]o.uk