- 02 -
IMPORTANT SAFETY INSTRUCTIONS
●Please read and understand all instructions before using this device.
●Don't change any settings that are not described in this manual.
●Warranty does not apply if personal injury, data loss, or damage occurs as a result of failure to
follow instructions.
Warnings
●To reduce the risk of fire or electric shock, do not expose the device to rain or moisture.
Objects filled with liquids, such as vases, should not be placed on the device.
●To prevent overheating, do not block or clog the ventilation openings.
●To avoid device damage or fire explosions, the air inlet/outlet/lens should be well ventilated
when the projector is working.
●Never place the device in a confined space. Always leave enough space around the device for
ventilation.
●Keep minimum (19.68 inch) space around the appliance for optimal ventilation.
●Do not place the device in areas susceptible to excessive dust and dirt or near any appliance
generating a strong magnetic field.
●Protect the device against direct sunlight heat, large temperature fluctuations, and moisture.
●When the device runs for a long time and the surface becomes hot, shut it down and unplug
the power cord. Resume operation only after the device has cooled.
●Always handle the device with care. Avoid touching the lens.
●Never place heavy or sharp objects on the device or the power cord.
●To avoid electric shock, do not disassemble the projector by yourself.
●Only use attachments or accessories specified by the manufacturer.
●Avoid extreme vibration. It may damage the internal components.
