Multipipe 22-99998 User manual
SMART Universal Gateway
Model: 22-99998
This product must be used with the Smart Home App.
Introduction
The Multipipe 22-99998 SMART Universal Gateway is the key product
for the entire system. This will oer you the possibility to wirelessly
control all the connected equipment just by using your smartphone or
your computer.
Safety Information
Use in accordance with the regulations.
Indoor use only.
Keep your device completely dry.
Disconnect your device before cleaning it with a dry cloth.
Devices that can be connected
Product Compliance
EU Directives: 2011/65/EU and 2014/53/EU Radio Equipment
Directive (RED). Please check www.saluslegal.com for the full
information. Radio Frequency Range 2405 MHz - 2480MHz, Max
Transmitting Power: < 20 dBm.
Installation manual
Multipipe Ltd
Unit 12 Great Hayes Business
Park
Lower Burnham Road
Stow Maries
Chelmsford
Essex
CM3 6SQ
Sales
T: 01245 227630
Technical
T: 01245 850799
E: [email protected].uk
www.multipipe.co.uk
SMART Room
Thermostats Boiler Receiver
Thermostatic
Radiator Valve Window/Door Sensor
Electric Monitor
Smart Plug
16 Amp Relay
Repeater
RF UFH Wiring Centre
1
3
4
5
Power up
Sign up, create an account and conrm it.
After that please Sign in.
Follow the on screen instructions.
Success! You have connected your gateway.
Press to go to the Dashboard.
Smart Home
✔
2
Optional: Connect your SMART Universal Gateway to the WiFi. First
add the gateway on the APP by using the Ethernet cable. Create the
WiFi settings and then remove the Ethernet cable.
WiFi SSID = the name of your network (Case sensitive)
WiFi Password = the password of your network (Case sensitive)
Note: The WiFi Internet connection might not be as stable as the one
on cable.
6
1 sec
3
1 2
4 5 6
Wait 2 min and then remove the Ethernet cable from the SMART
Universal Gateway.
Factory Reset: USE ONLY if you want to reset your device. Press the
button for 10 sec.When the process is complete the LED will be blue.
With Internet connection
10 sec
Without Internet connection
10 sec
