MUNBYN IPDA084P User manual

Mobile Data Terminal
IPDA084P User Manual
Version：1.0.0Version：1.0.0
More choice for your growing business

Content 1.0 Product intro
1.1 Intro
IPDA084P is an industrial-grade smart handheld terminal.
It is based on Android 10.0, which runs fast and has a long battery life.
To meet the needs of multi-industry applications like logistics express,
warehouse inventory, manufacturing, retail, etc., it can help customers
quickly access information and improve the efficiency of outbound
storage inventory.
The user manual download link: https://munbyn.biz/084um
The SDK download link: https://munbyn.biz/084sdk
1.2 Precaution before using battery
Do not leave battery unused for long time, no matter it is in device or
inventory. If battery has been used for 6 months already, it should be
checked for charging function or it should be disposed correctly.
The lifespan of Li-ion battery is around 2 to 3 years. It can be charged for
300 to 500 times. (One full battery charge period means completely
charged and completely discharged.)
When Li-ion battery is not in use, it will continue to discharge slowly.
Therefore, battery charging status should be checked frequently and
take reference of the related battery charging information on the manual.
Observe and record the information of a new unused and non-fully
charged battery. On the basis of the operating time of new battery and
compare with a battery that has been used for a long time. According to the
product configuration and application program, the operating time of the
battery would be different.
1.0 Product intro
1.1 Intro 2
1.2 Precaution before using battery
1.3 Charger
1.4 Notes
2
3
3
5.1 PING tool 13
5.2 Bluetooth
5.3 GPS
5.4 Volume setup
13
14
15
5.5 Sensor 15
5.6 Keyboard 16
5.7 Network 16
2.1 Appearance 4
2.2 Install Micro SD and SIM cards
2.3 Battery charge
2.4 Device Power on/off
5
5
5
3.1 Function setup and keycode 6
3.2 Process mode
3.3 Additional information
7
10
3.4 Continuous scan setup 10
3.5 Enable scanner 11
2.0 Installation instructions
3.0 Keyboard emulator
4.0 Barcode reader-writer 12
6.0 FAQ 18
5.0 Other functions
- 2 -

- 3 - - 4 -
Check battery charging status at regular intervals.
When battery operating time drops below about 80%, charging time will
be increased remarkably.
If a battery is stored or otherwise unused for an extended period, be sure
to follow the storage instructions in this document. If you do not follow the
instructions, and the battery has no charge remaining when you check it,
consider it to be damaged. Do not attempt to recharge it or to use it.
Replace it with a new battery.
Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
1.3 Charger
Please use the original adapter and cable otherwise the machine will not
be charged or even be damaged.
1.4 Notes
1.Using the incorrect type of battery has the danger of explosion.
Please dispose of the used battery according to instructions.
2.The charging port of the device is a type-c interface.
3.The adapter shall be installed near the equipment and shall be easily
accessible.
4.The suitable temperature for the product and accessories
is 0-10℃to 50℃.
2.0 Installation instructions
2.1 Appearance
- Buttons instruction
IPDA084P front and side appearances are showing as follows:
Button Function
Power Button Press and hold to turn the device on or off
Custom Function Button Customize function by software
SCAN Scan Button
X Cancel Button
Num Switch white keyboard function
Fn Switch orange keyboard function
Setting Button Right of the Fn Button
Enter Enter Button

- 5 - - 6 -
3.0 Keyboard emulator
2.2 AInstall Micro SD and SIM cards
Detailed installation of Micro SD、SIM、PSAM Card steps are
as follows:
3.1 Function setup and keycode
The keycode:
In the function list, user can select supported function that can be
realized by keyboard emulator. For example, if the device has
equipped with 2D barcode scanning module, option “Barcode2D”
should be selected for scanning 1D/2D barcode.
Keyboard emulator detailed operation manual download link:
https://munbyn.biz/083kem
2.3 Battery charge
By using USB Type-C contact, the original adapter should be used
for charging the device. Make sure not to use other adapters to
charge the device.
2.4 Device Power on/off
Press the ‘Power’ button on the top about 3s to power on/off.
And press it shortly to wake up.
PSAM
TF Card
SIM
Click “Keycode” to acquire focus point, press the button “SCAN”,
then the related key code will be entered on the line automatically.
Left scan key: 139 / Right scan key: 139
139 139

3.2 Process mode
- 7 - - 8 -
Process mode means how the data will be processed after barcode data
has been read out.
Scan content on cursor: Enter read-out data in cursor position.
Keyboard Input: Enter read-out data in cursor position,it is same as input
data on an analog keyboard.
Clipboard: copy the read-out data on clipboard, paste data on the place
that user needs.

- 9 - - 10 -
3.3 Additional information
The additional information means add extra data at front or
rear on scanned barcode data.
“Prefix”: add data at the front of read-out data.
“Suffix”: add data at the rear of read-out data.
For example, if the original read-out data is “12345678”, prefix
will be modified as “111” and suffix will be modified as “yy”,
the final data will display “11112345678yy”.
3.4 Continuous scan setup
Select continuous scan, user can adjust the interval and time
out.
Broadcast Receiver:
It’s the method that using the broadcast mechanism of Android to transfer
read-out barcode data to customer’s program.In this way, the codes of API
in SDK do not need to be written into customer software codes, read-out
data can be acquired by registering broadcast and customer can operate
read-out data according to logic requirement. After select
“Broadcast Receiver”, “Broadcast name” and “Key” need to be adjusted.
Broadcast name:
It’s the broadcast name of acquired data in customer software.
Key:
Acquire the corresponding key designation of the broadcast.

- 11 -
4.0 Barcode reader-writer
1. In App Center, to open 2D barcode scan test.
2. Press “SCAN” button or click scan key to start scanning, the
parameter “Auto interval” can be adjusted.
Caution: Please scan codes in the correct way otherwise the
scanning will fail.
2D code:
3.5 Enable scanner
After all previous functions have been adjusted, click
“Enable scanner” to switch on scanner, now user can use all
the functions of keyboard emulator.
- 12 -
139 139

5.1 PING tool
5.0 Other functions
1. Open “PING” in App Center.
2. Setup PING parameter and select external/internal address.
5.3 GPS
1. Click “GPS” in App Center to open GPS test.
2. Setup GPS parameters to access GPS information.
5.2 Bluetooth
1. Open “BT Printer” in App Center.
2. In the list of detected devices, click the device that you want
to pair with.
3. Select printer and click “Print” to start printing contents.
- 13 - - 14 -

- 15 - - 16 -
5.4 Volume setup
1. Click “Volume” in App Center.
2. Setup volume by requirements.
5.5 Sensor
1. Click “Sensor” in App Center.
2. Setup the sensor by requirements.
5.6 Keyboard
1. Click “Keyboard” in App Center.
2. Setup and test the main value of the device.
5.7 Network
1. Click “Network” in App Center.
2. Test Wi-Fi/Mobile signal by requirements.

- 17 - - 18 -
6.0 FAQ
Q1: Why is there no light when scanning?
A1: First make sure that "Enable Scanner" is turned on and the
keycode entered is correct.
Left scan key: 139
Right scan key: 139
Q2：Why can't my newly purchased device be turned on, even after
charging for more than half an hour?
A2: It must be that the insulation sticker of the battery has not been
torn off, please tear off the insulation sticker of the battery before
turning on the machine. In addition, you should use the original
adapter and cable otherwise the machine will not be charged or
even be damaged.
Q3: How to use the battery correctly?
A3: The battery is Li-ion battery. Please immediately charge the
battery when the power is less than 20%. Don't keep the battery
with full power or no power for a long time. The best way to
store it is to keep 50% power of the battery. And if you don't use
the PDA for a long time, it is better to pull out the battery
from PDA.
Q4: The device cannot be charged.
A4: (1) Check the adapter and charging port for malfunction.
(2) If the device is not used for a long time, please keep it
charged for 30 minutes. Then check the device lights on or not.
(3) Replace the battery with the new one. And check device or
battery for malfunction.
Need Tech Support ,Contact Us by:
MUNBYN provides 18 months warranty and lifetime free service.
If you encounter any issues with the product, please contact the
MUNBYN team to promptly receive troubleshooting tips or
a replacement.
Email: [email protected] (24-7 online support)
Website: www.munbyn.com (how-to videos, warranty details)
WhatsApp: [phone]

- 17 - - 19 -
Q5: What are the precautions when switching between normal
mode and continuous mode?
A5: When switching between normal mode and continuous mode,
you need to restart the keyboard assistant, and switch Enable
Scanner again. We recommend you to use normal mode.
Q6: After linking Wi-Fi, it already shows that the linked Wi-Fi has
been saved, but the network is not available. Why？
A6: This situation shows that the Wi-Fi signal is very weak.
It is recommended to connect to Wi-Fi where the signal is strong.
* If you still have problems, please contact the technical team.