MUNBYN IPDA086WIFI User manual

IPDA086W
MORE CHOICE FOR YOUR
GROWING BUSINESS
Version: 1.0.0
IPDA086WIFI Version
Mobile Data Terminal
MORE CHOICE FOR YOUR
GROWING BUSINESS

Contents
Chapter 1 Product intro
1.1 Intro
1
1
2
3
5
5
6
6
7
8
8
9
9
11
14
16
17
18
19
19
21
22
23
24
25
26
1.2 What’s in the Box
1.3 Precaution before using battery
1.4 Charger
1.5 Notes
Chapter 5 Other functions
Chapter 6 FAQ
5.1 PING tool
5.2 Bluetooth
5.3 Volume setup
5.4 Sensor
5.5 Keyboard
5.6 Network
Chapter 2 Installation instructions
2.1 Appearance
2.2 Install Micro SD
2.3 Battery charge
2.4 Buttons and function area display
Chapter 3 Keyboard emulator
Chapter 4 Barcode reader-writer
3.1 Function setup and keycode
3.2 Process mode
3.3 Additional information
3.4 Continuous scan setup
3.5 Enable scanner

IPDA086WIPDA086W
1 2
Chapter 1 Product intro
1.1 Intro
IPDA086WIFI Version is an
industrial-grade smart handheld terminal.
It is based on Android 11, which runs fast
and has long battery life. It uses WiFi for
internet connection and does not support
4G LTE function. To meet the needs of
multi-industry applications like
warehouse inventory, manufacturing,
retail, etc., it can help customers quickly
access information and improve the
efficiency of outbound storage inventory.
1.2 What’s in the Box
When you receive the package, open
and check the packing list in the
package.
https://support.munbyn.com/hc/en-us/
articles/6092601562643-Handhelp-
Computers-PDA-User-Manuals-SDK-
Download
The user manual download link:

1.3 Precaution before using battery
Do not leave the battery unused for a
long time, no matter if it is in the device
or inventory. If the battery has been
used for 6 months already, it should be
checked for charging function or it
should be disposed of correctly.
IPDA086WIPDA086W
3 4
Check battery charging status at
regular intervals.
When battery operating time drops
below about 80%, charging time will be
increased remarkably.
If a battery is stored or otherwise
unused for an extended period, be sure
to follow the storage instructions in this
document. If you do not follow the
instructions, and the battery has no
charge remaining when you check it,
consider it to be damaged. Do not
attempt to recharge it or to use it.
Replace it with a new battery.
Store the battery at temperatures
between 5 °C and 20 °C (41 °F and 68 °F).
The lifespan of a Li-ion battery is around
2 to 3 years, it can be circularly charged
300 to 500 times. (One full battery
charge period means completely
charged and completely discharged.)
When a Li-ion battery is not in use,
it will continue to discharge slowly.
Therefore, battery charging status
should be checked frequently and take
reference related battery charging
information in the manuals.
Observe and record the information of
a new unused and non-fully charged
battery. On the basis of the operating
time of the new battery and compare
with a battery that has been used for a
long time. According to the product
configuration and application program,
the operating time of the battery would
be different.

1.4 Charger
The charger output voltage/current is 9V
DC/2A. The plug is considered as a
disconnect device of the adapter.
1.5 Notes
1. Using the incorrect type of battery has
the danger of explosion. Please dispose
of the used battery according to the
instructions.
2. Due to the used enclosure material,
the product shall only be connected to a
USB Interface of version 2.0 or higher.
The connection to the so-called power
USB is prohibited.
3. The adapter shall be installed near the
equipment and shall be easily accessible.
4. The suitable temperature for the
product and accessories is -10℃to 50℃.
IPDA086WIPDA086W
5 6
Chapter 2 Installation instructions
2.1 Appearance
IPDA086W back and front appearances
are showing as follows:

IPDA086WIPDA086W
7 8
Buttons instruction
2.2 Install Micro SD
The cards sockets are showing as follows:
2.3 Battery charge
By using USB Type-C contact, the original
adapter should be used for charging the
device. Make sure not to use other
adapters to charge the device.
2.4 Buttons and function area display
IPDA086W has 6 side buttons, 2D
scanning module locates on the top. HD
camera and flashlight locate at the rear.
Note: This device does not support
4G LTE capability.
Button
Side
button
1.Power Locate on the right side,
press to ON/OFF device
Locate on the right side, its
function can be defined
by software
Scanning button located on
both sides. There are two
scanning buttons
Volume up and down
2.PTT key
3.SCAN
4.Volume +/-
Description

IPDA086WIPDA086W
9 10
Chapter 3 Keyboard emulator
Keyboard emulator detailed operation
manual download link：
https://munbyn.biz/083kem
3.1 Function setup and keycode
The keycode:
In the function list, the user can select the
supported function that can be realized
by keyboard emulator. For example, if the
device has equipped with 2D barcode
scanning module, option “Barcode2D”
should be selected for scanning 1D/2D
barcode.
Click “Keycode” to acquire focus point,
press the button “SCAN”, then related key
code will be entered on the line
automatically.
After the function has been bound
with button, related function can be
activated by pressing button.
Left scan key: 291
Right scan key: 293

3.2 Process mode
Process mode means how the data will
be processed after barcode data has
been read out.
Scan content on cursor: enter read-out
data in cursor position.
Keyboard Input: enter read-out data in
cursor position, it is the same as input
data on analog keyboard.
Clipboard: copy the read-out data on
the clipboard, paste data on the place
that the user needs.
IPDA086WIPDA086W
11 12

Broadcast Receiver: it is the method that
uses the broadcast mechanism of
Android to transfer read-out barcode
data to customer’s program.In this way,
the codes of API in SDK do not need to be
written into customer software codes,
read-out data can be acquiredby
registering broadcast and customers can
operate read-out data according to logic
requirements.
After selecting “Broadcast Receiver”,
“Broadcast name” and “Key” need to be
adjusted.
Broadcast name: it is the broadcast name
of acquired data in customer software.
Key: acquire the corresponding key
designation of the broadcast.
IPDA086WIPDA086W
13 14
3.3 Additional information
The additional information means adding
extra data at front or rear on scanned
barcode data.
“Prefix”: add data at the front of read-out
data.
“Suffix”: add data at the rear of read-out
data.
For example, if the original read-out data
is “12345678”, prefix will be modified
as “111” and suffix will be modified as “yy”,
the final data will display “11112345678yy”.

IPDA086WIPDA086W
15 16
3.4 Continuous scan setup
Select continuous scan, user can adjust
the “interval” and “time Out”.