mundoclima RG57 User manual


English
www.mundoclima.com
Function Selection Manual
REMOTE CONTROLLER RG57
Thank you very muchfor purchasing our products.
Please read thismanual carefully beforeusing the
remote controller.
CL94588
RG57A6/BGEF



3
3
4
Remote controller specification........................................................................................
Features of remote controller buttons .............................................................................
How to set up the functions..............................................................................................
CONTENTS

1

ON/OFF
MODE
TEMP
TIMER ON
TIMER OFF
POWER OFF button:Press this buttonto turn off
the unit
TIMER ON button:Press this buttonto confirm the
setting parameter andtransmit the signalto the
machine.
FAN &TIMER OFF button:On parameter setting
interface, pressing FAN & TIMER OFF button to
select parameter tobe modified.
TEMP & button: Used to choose
functions or adjustparameters. On parameter
unadjustable interface, press the &
button to selectthe specified functionin a
range of F1~ F9 andE1~E9. Then pressing the
MODE button toenter the parametermodifying
interface, the relevant parameter flashes, pressing
& button toadjust the paramter.
MODE button: Used tomodify the selected
function. Press thisbutton to enterthe parameter
setting interface, andthe parameter tobe modified
will be keptflashing. Using TEMP &
button to modifythe parameter orchoosing the
other parameter inconjuction with FAN & TIMER
OFF button.
LOCK button: Hold and press this two buttons for
2 seconds, all current settings of indoor unit are locked
in and the remote controller does not accept any
operation except that of the LOCK.
IMPORTANT: The remote controlleris only enabledwithin10
minutes after theindoor unit ispowered on, and the indoor unit
must be switchedoff.
FAN

Model
Rated Voltage
RG57A6/BGEF
8m
3.0V(Dry batteries R03/LR03 2)
Remote Controller Specification
Environment
Signal Receiving Range
Features of Remote Controller buttons
NOTE: After installingthe batteries, duringthe first 30seconds
period, please holdingdown the MODE,FAN andTIME ON
buttons together for5 seconds, theremote controller willenter
function reset state,and LCD windowdisplays F1.
MODE
FAN
TEMP
SLEEP
LED FOLLOW ME
TURBO SELF CLEAN
ON/OFF
TIMER
ON
TIMER
OFF
RG57A6/BGEF
SILENCE
FP
SWING DIRECT
-5ºC to 60ºC

2
SLEEP
SW ING DIRECT


Auto-start function
Heating temperature compensation
1. Press & button to choose F2.
1. Press &
button to choose F1.
2. Press MODEbutton. Then
press & button to
choose On or Off .
2. Press MODEbutton. Then press & button to
choose the parameter. The parameters can be adjusted
OO
within a rangeof -6 C~6 C.
How to set up the functions
TEMP
TEMP
TEMP
TEMP
ADJUST
ADJUST
MODE
MODE
3. Press TIMER ON button, and theAuto-start function on/off
setting has finished.
3. Press TIMER ON button.
TIMER ON
TIMER ON
NOTE: The indoor unitwill beep for2 seconds indicating the
function being setup successfully.
Anti-cold air function
Intelligent anti-cold airfunction setting:
1. Press & button to choose F3.
TEMP
TEMP
NOTE: The parameter ofintelligent anti-cold airis changed with the
room temperature.After the roomtemperature raised, the temperature
of anti-cold airwould raise too,which can make you feel morecomfortable.
After the roomtemperature decreased, theanti-cold air temperature
would decrease too,which can improvethe fan speed and bring fast
heating operation.
-
---
--.... ....
....
....
Flashing
Flashing
3.Press TIMER OFF button to adjust the parameter. The parameter
keeps flashing. Then press & button to adjust the
OO
parameter in therange of 17 C~21C.
2. Press MODEbutton. Press FAN button toto choose
parameter . Then press & button to select 1.
MODE
TIMER OFF
FAN
4. Press TIMER ON button to confirm.
TIMER ON
TEMP
TEMP
TEMP
TEMP



Flashing
Flashing
3.Press TIMER OFF button to adjust the parameter. The parameter
keeps flashing. Then press & button to adjust the
OO
parameter in therange of 8 C~28 C.
1. Press & button to choose F3.
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
2. Press MODEbutton. Press FAN button toto choose
parameter . Then press & button to select 2 .
MODE
TIMER OFF
FAN
4. Press TIMER ON button to confirm.
TIMER ON
General Anti-cold air function setting:
NOTE: The parameter ofgeneral anti-cold air is fixed regardless
of room temperature.

3

Speed control of indoor fan motor after the set
temperature reached
1. Press & button to choose F4.
TEMP
TEMP
TEMP
TEMP
2. Press MODEbutton. Then press & button to
sel ect 1, 2 , 3 o r 4 .
MODE
Indicates stopping fanmotor
Indicates operating atlowest fan speed
Indicates operating atsetting fan speed
Indicates cycle on-off function
3. Press TIMER ON button.
TIMER ON


1. Press & button to choose F5.
TEMP
TEMP
TEMP
TEMP
2. Press MODEbutton. Then press & buttonto
select 1, 2 or 3 .
MODE
Indicates cancelling memoryfunction.
Indicates the louverangle memory functionis enabled
under switching off or power failure.
Indicates the louverangle memory functionis enabled
under switching off, disabled under power failure.
3. Press TIMER ON button to confirm.
TIMER ON
Louver angle memory function
1. Press & button to choose F6.
TEMP
TEMP
TEMP
TEMP
2. Press MODEbutton. Then press & buttonto
select HH or CH. (HH: Heating only, CH: Cooling
& Heating)
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
Heating only or Cooling & heating setting
Cooling temperature compensation
Refrigerant leakage detection
1. Press & button to choose F7.
1. Press & button to choose F8.
2. Press MODEbutton. Then press & buttonto
OO
choose the parameterin a rangeof -2 C~2 C.
2. Press MODEbutton. Then press & buttonto
choose on or of .
TEMP
TEMP
TEMP
TEMP
MODE
4


Cleaning Filter Reminder
Filter Replacement Reminder
Lowest temperature setting
High temperature setting
1. Press & button to choose F9.
1. Press & button to choose E1.
1. Press & button to choose E4.
1. Press & button to choose E5.
1. Press & button to choose E2.
1. Press & button to choose E3.
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
TEMP
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
2. Press MODE button. Then press & button to
choose on or of .
2. Press MODE button. Then press & button to
choose on or of .
2. Press MODE button. Then press & button to
choose on or of .
2. Press MODE button. Then press & button to
choose H or C.
2. Press MODE button. Then press & button to
OO
set the temperaturein a rangeof 17 C to 24 C.
2. Press MODE button. Then press & button to
OO
set the temperaturein a rangeof 25 C to 30 C.
Special Anti-cold air function setting:
Priority setting of heating or cooling
(applicable for multi models)
: Heating modefirst
: cooling modefirst



Network Address setting
Capacity code selection
1. Press & button to choose E6.
1. Press & button to choose E7.
TEMP
TEMP
TEMP
TEMP
3. Press TIMER ON button to confirm.
2. Press MODE button. Then press & buttonto
choose the networkaddress between 0to 63 or .
Indicates cancelling thethe adress modifiedby remote
controller (determined bycode switch) .
2. Press MODE button. Then press & button to
choose the capacitycode between 0~11 .
(0~3: Reserved number), 4: 18K model, 5: 24K model,
7: 30K model, 8: 35K model,9: 48K model, 10: 54K model
11: 60K model.
3. Press TIMER ON button to confirm.
--
--

Twins setting
1. Press & button to choose E9.
1. Press & button to choose E8.
TEMP
TEMP
TEMP
TEMP
3. Press TIMER ON button to confirm.
3. Press TIMER ON button to confirm.
2. Press MODE button. Then press & button to
choose the valuebetween 0 and4.
2. Press MODE button. Then press & button to
choose 0(no twins),1(main unit) or2(subsidiary unit)
Static pressure setting
5



6
Some functions ofthe remote controller will not
be available whenthe unit doesnot support them!
NOTES
Constant Airflow Setting
1. Press & button to choose d4.
TEMP
TEMP
TEMP
TEMP
3. Afterthe testing modeis finished, press & to
choose E9.
5. Press TIMER ON button to confirm.
2. Press TIMER ON button to confirm,then the unit will enter
into testing modeand get theon-way resistance.
4. Press MODE button. Then press & button to
choose the valuebetween 0 and4.


Point check function
Enquiry information
Enquiry
information
Display
value Meaning Remark
Displaying code Meaning
T1 T1 T1 temp.
T2 T2 T2 temp.
T3 T3 T3 temp.
T4
T2B T2B temp.
Tb
TP TP temp.
TP
TH
TargetedFrequency TargetedFrequency
Actual Frequency Actual Frequency
Indoor fan speed Indoor fan speed
Outdoor fan speed Outdoor fan speed
EXV opening angle EXV opening angle
Compressor continuous
running time
Compressor continuous
running time
Causes of compressorstop
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Causes of compressor stop
TH temp.
TH
FT
Fr
IF
OF
LA
CT
ST
A0
A1
b1
b0
b2
b3
b4
b5
b6
dL
Ac
Uo
Td
T4 T4 temp.
Press the LED DISPLAY button( Mute button for some
remote controllers) ofremote controller threetimes and then
press AIR DIRECTION button ( Swing button for some
remote controllers) threetimes within 10seconds, the buzzer
ring last 2seconds,the air conditionerwill enter theinformation
enquiry status.After that, pressthe LED DISPLAY button to
enquiry the nextone information andpress the AIR
DIRECTION button to enquiry the lastone information. When
the air conditionerenter the informationenquiry status, itwill
display the codename in 2seconds, the detailsare as follows:
When the aircondtioner enter the information enquiry
status, it willdisplay the codevalue in thenext 25s after
display name isdisplayed, the detailsare as follows,
T1,T2,T3,
T4,T2B,TP,
TH,
Targeted
Frequency,
Actual
Frequency
-1F,-1E,
-1d,-1c,
-1b,-1A
-25,-24,-23,-22,
-21,-20
-19-99
0
1,2,3,4
14-FF
0-FF
0-FF
0-FF
0-FF
0-FF
0-FF
0-FF
0-99
OFF
-19-99
A0,A1...A9 100,101......109
b0,b1...b9
c0,c1....c9
d0,d1...d9
E0,E1...E9
F0,F1...F9
110,111....119
120,121....129
130,131....139
140,141....149
150,151....159
1. Allthe displaying
temperature is actual
value.
O
2. Allthe temperature is C
no matter whatkind of
remote controller isused.
3. T1,T2,T3,T4,T2B display
range:-25~70, TPdisplay
range:-20~130.
4. Frequency displayrange:
0~159HZ.
5. If theactual value
exceeds the range,it will
display the maximum
value or minimumvalue.
Indoor fan
speed/
Outdoor
fan speed
Low speed,
Medium speed,
High speed,
Turbo
For some bigcapacity
motors.
Actual fan speed
=Display value
turns to decimal
value and then
multiply 10. The
unit is RPM.
For some smallcapacity
motors, display valueis
from 14-FF(hexadecimal),
the corresponding fan
speed range isfrom
200-2550RPM.
EXV
opening
angle
Actual EXV
opening value=
Display value
turns to decimal
value and then
multiply 2.
Compressor
continuous
running
time
0-255 minutes If the actualvalue exceeds
the range, itwill display the
maximum value orminimum
value.
Causes of
compressor
stop.
For the detailed
meaning, please
consult with
engineer
Decimal display
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
0-FF
0-FF
0-FF
0-FF
0-FF
0-FF
0-FF


7


ASK FOR MORE INFORMATION
Phone: [phone]
eMail: [email protected]
TECHNICAL ASSISTANCE
Phone: [phone]
www.mundoclima.com