MusicSnail V10 User manual
- 2 -
Function description：
Silicone ear cap
Charging contact
Micro USB charging
Multi-function
button
microphone
LED indicator
Charging box battery indicator position
- 3 -
Pairing method with mobile phone:
Step 1:Slide the top cover of the charging box and take out the two
headphones. The left and right headphones will automatically open and
complete the connection. ("R" headphone LED indicator appears as red and
blue alternately lit)
Step 2: Open the mobile phone Bluetooth device, search for the pairing
name "V10-R", and click Finish to connect. (Headphone LED indicator appears
as blue slowly flashing)
- 4 -
Share usage mode (left and right headsets are connected to A\B
phones respectively):
Step 1:Take the “L” earphone separately from the charging box and wait
for 30 seconds. The headphone LED indicator flashes red and blue alternately.
Turn on the "A" phone Bluetooth, search for the device, find "V10-L", and click
Finish to connect.
Step 2:Take the “R” earphone from the charging box and wait for 15
seconds. The headphone LED indicator flashes red and blue alternately. Open
the "B" phone Bluetooth, search for the device, find "V10-R", click to complete
the connection.
Note:
If you need to restore the normal stereo mode, just put the “L” and “R”
headphones back into the charging box, and then take out the two
headphones. The left and right headphones will connect to each other first,
enter the stereo state, and then automatically connect the B phone by default.
The headset may not work properly due to incorrect operation. This is not a
quality defect. You can solve it in the following ways:
1. Clear the Bluetooth pairing information of the mobile phone, put the left
and right earphones back into the battery box, take out the earphones, and
re-pair the connected mobile phones.
2. Clear the Bluetooth pairing information of the phone, restore the left and
right headphones to the factory settings, and then reconnect the phone.
- 5 -
Restore factory settings.
Method one
Step 1: Remove the "L" headset from the charging box. Wait 30 seconds,
when the LED indicator turns red and blue alternately, press the
multi-function button 4 times (interval time is 0.5 seconds), the headphone
LED indicator turns red and then goes out. The "L" headphones are restored
to the factory settings. Put in the charging box.
Step 2: Remove the "R" headphones from the charging case. Wait 20
seconds, when the LED indicator turns red and blue alternately, press the
multi-function button 4 times (interval time is 0.5 seconds), the headphone
LED indicator turns red and then goes out. The "R" headphones are restored
to the factory settings. Put in the charging box.
Method Two
Step 1 Manual shutdown: Remove the left and right headphones from the
charging box, press the multi-function button for 10 seconds, the LED
indicator turns red and then goes out.
Step 2 Turn on and pair: Press the left and right headset multi-function
buttons for 10 seconds, and then release the finger after the left and right
headphone LEDs flash alternately.
Step 3 Restore the factory settings: quickly press the left and right
earphones multi-function button 4 times, the left and right earphone LEDs
turn red and then go out.
- 6 -
Multi-function button operation instructions：
Play/Pause
Click the "R" or "L" headset
multi-function button
Switch songs (next song)
Double-click the "L" headset
multi-function button
Switch songs (previous song)
Double-click the "R" headset
multi-function button
Call response
Click the "R" or "L" headset
multi-function button
Hang up the phone
Click the "R" or "L" headset
multi-function button
Refuse to call
Press the “R” or “L” headset
multifunction button for 2
seconds
Replay the last number
Triple-click "R" or "L" headset
multi-function button
Summon SIRI
Press the "R" or "L" headset
multifunction button for 1
second. Click the "R" or "L"
again to turn off the voice
assistant
- 7 -
Product Parameters：
Product model
V10 TWS Wireless earphone
Bluetooth version
Realtek V5.0+EDR
Talk time
about 5 hours
Music time
about 5 hours
Headphone tip language
English
Transmission distance
10m
Headphone charging time
about 1 hours
Charging time of charging box
about 8 hours
Single headphone weight
4.5g
Charging box weight
135g
Headphone battery capacity
50mAH
Charging box battery capacity
3200mAH
Headphone battery model
601112+PCB board
Charging box battery model
18650+PCB board
Battery type
Polymer lithium battery
Guarantee
1 Year
- 8 -
Charging:
(1) Headphone charging.
The charging box has a built-in battery. When the charging box is
fully charged, put the earphone into the charging box to charge the
earphone. When the earphone is in the charging state, it always
lights up red, the charging box is always bright blue; when the
earphone is charged When saturated, it lights up in blue, turns off
after 30 seconds, and the blue light of the charging box goes out.
(2) Charging the charging box.
When the power of the charging box is too low or no power,
connect the USB cable to charge; when the charging box is in the
charging state, the blue light flashes; when the charging is saturated,
the blue light is always on.
State
LED indicator
Earphone
Charging
Red light is always on
Full of electricity
Bright blue light goes out after 30 seconds
Charging box
Charging
Blue light flashes
Full of electricity
Blue light is always on
- 9 -
Boot method:
(1) Automatic boot.
Open the top cover of the charging case, then pick up the two
headphones, and the two headphones will automatically turn on.
(There is a power-on tone)
(2) Manual boot.
When the earphone is not inside the charging box, you can
manually touch the power on; at the same time, press and hold the
two headphones to open the key for about 3 seconds, then let go,
this time is the power on state.
Shutdown method:
(1) Put two earphones into the charging box. At this time, the
earphones are always lit red. At this time, it is in the state of
charging, and it is turned off at this time;
(2) Press and hold the two earphones for about 3 seconds at the
same time to turn off the headphones;
(3) When the headset is disconnected from the mobile phone for
more than 5 minutes, the headset automatically shuts down;
Other functional tests:
(1) Boot back.
- 10 -
Automatically connect back to the paired mobile phone after
booting;
(2) Over distance return.
The main ear and the mobile phone can return to a certain distance
within 5 minutes after disconnection; the main ear and the auxiliary
ear can be connected back within a certain distance within 5
minutes after being disconnected;
(3) The distance does not return.
After the main ear and the mobile phone are disconnected for more
than 5 minutes, the earphone automatically shuts down; after the
main ear and the auxiliary ear are disconnected for more than 5
minutes, the auxiliary ear automatically shuts down;
(4) The distance is disconnected.
If the main ear and the mobile phone are beyond a certain distance,
the connection will be disconnected; if the main ear and the
auxiliary ear are beyond a certain distance, the connection will be
disconnected;
(5) Back connection status.
The TWS connection state lasts for 20 seconds, and the Bluetooth
status of the mobile phone is connected for 30 seconds. If there is
no connection, the pairing state will be entered;
- 11 -
(6) Synchronous display.
IOS system, headphone power synchronization display; IOS system,
mobile phone volume adjustment synchronization display;
(7) Charge reset.
When the earphone is charged in the charging box, the earphone is
restored to the original state before the power is turned on;
(8) Low power alarm.
When the battery voltage of the earphone is lower than 3.3V, the
low power prompts once every 20 seconds;
(9) Low power shutdown.
When the battery voltage of the earphone is lower than 3.1V, the
earphone will automatically shut down;
(10) Charging box battery capacity.
3.7V/3200mAh (the charging box can be used to charge the headset
for more than 30 times), the charging box can be used as an
emergency mobile power source to charge the mobile phone and
other peripherals (the MIRCO 5PIN charging adapter is equipped in
the accessory);
- 12 -
Warning and precautions
1: To prevent fire or shock hazard, do not expose this unit to rain moisture.
2: Do not place this unit directly onto furniture surfaces with any type of soft,
porous , or sensitive finish.As with any rubber compound make with oils , the
feet could cause marks or staining where the feet reside.
3: Lithium batteries are recyclable and should be recycled or disposed of in
normal household waste. Contact your local government for disposal or
recycling practices in your area. They should be incinerated since they might
explode.
NOTE !
This device uses an internal rechargeable lithium-ion battery that should last
the lifetime of the device. If you suspect your battery may be dead after
several attempts to charge , please contact aftersales-service center for
support.Never disassemble the unit or attempt to remove the battery as that
could cause leakage of an electrolyte substance.
Thank you for using this product, I wish you a happy life
Table of contents
