MUX IR Remote User manual

www.mux.life
IR Remote
Product and Installation Guide

Product Overview
- Add upto five remote control devices at a time
- App Control
- Voice Control (compatible with Amazon Alexa and Google Assistant)
- Smart Scheduling and Automation
- Timers
- Smart Scenes
- Real time status notification
- Remote Management
Features
Plug in the IR Remote with 5V adapter into the
socket and look for the LED status.
For LED status, see the table.
Installation
Mux IR Remote is a Wi-Fi enabled smart device, which allows you to control your
remote controlled devices such as TVs, Air Conditioners, Projectors, and Sound
systems etc. via the Mux Life App. Additionally you can set timers, apply
schedules and control the devices via virtual assistants. Detailed statistics help
you monitor the usage of your devices.
Reset Button
Top View

Product LED Status
Fast Blink (< 0.5 sec)
Slow blink (1 sec)
Stable
LED Light
Green Light
LED Status Wifi Status Description
Device in
Broadcast (reset)
Mode
You can add this
device into your Mux
Life account.
Device connected
to Wi-Fi but has no
internet access
Check internet
connection on the
Wi-Fi Router where the
device is connected.
Device can perform all
actions.
Device correctly
configured
To put the device in reset mode, press and hold the reset button on the device for
6 seconds (until the green LED starts flashing). The device is now in the reset
mode. You can now add the device in your Mux Life account.
Reset Device
USB Port
LED Light
Side View

Caution
Scan the QR code to watch an installation video to setup Mux Life App.
App Setup
- Do not put the IR remote in wet places.
- Do not use an adapter more than 5V.
- Make sure that there isn't any obstacle between IR Remote and appliance
(it should be in line of sight).
Download the Mux Life App from the Google Play / App Store or scan the QR code.
App Download