MuxLab 500174 User manual

P/N: 94-000707-A SE-000707-A
Active VGA Managed Receiver
500174
Installation Guide

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 2
Copyright Notice:
Copyright © 2011 MuxLab Inc. All rights reserved.
Printed in Canada. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise without prior written permission of the author.
Trademarks:
MuxLab and VideoEase are registered trademarks of MuxLab Inc.

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 3
Table of Contents
1. System Overview............................................................4
1.1.Description..............................................................4
1.2.System Features ......................................................6
2. Technical Specifications ................................................7
3. Installation Procedure.................................................10
3.1.Parts List ...............................................................10
3.2.Product Overview .................................................11
3.3.Pre-Installation Checklist......................................12
3.4.Physical Installation..............................................13
3.5.Installation Procedure............................................15
3.6.Port Control Operations ........................................18
3.7.Driver Setup..........................................................19
3.8.Cascadability.........................................................22
4. Troubleshooting...........................................................23
5. Appendix.......................................................................25
6. Product Warranty Policy............................................26

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 4
1.
System Overview
1.1. Description
MuxLab’s family of Active VGA Managed products
allows a single video source to be transmitted to various
remote locations in a point-to-multipoint configuration
for cost-efficient connectivity.
The Active VGA Managed family consists of three
products:
(1) Active VGA Managed Receiver
(2) Active VGA Managed Dispatcher
(3) Active VGA Managed Repeater Hub
A video source is connected to the Dispatcher, which in
turn distributes the source signal to Receivers placed in
locations as far as 1,000 feet (305 meters) away. Each
Receiver then transmits this signal to as many as two
display devices. Working alone, the Dispatcher (8 or 16
port) can distribute signals to as many as 8 or 16 remote
locations.
A Repeater Hub is used whenever a source signal must
be distributed to more than 8 or 16 remote locations, or
over a distance of more than 1,000 feet. The Repeater
Hub receives the source signal from the Dispatcher,
amplifies and equalizes it, and then distributes it to as
many as 8 Receivers located as far as 1,000 feet away.

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 5
Because the Repeater Hub itself can be located as far as
1,000 feet away from the Dispatcher, the effective
distance from Dispatcher to Receiver is therefore
doubled to 2,000 feet (610 meters). Furthermore, since
the Dispatcher (8 or 16 port) can distribute signals to as
many as 8 or 16 Repeater Hubs, each of which in turn
can distribute signals to 8 Receivers, the number of
remote locations that receive source signals increases by
7 with each Repeater Hub used.
Figure 1: System Overview
MuxLab’s Active VGA Managed Receiver has Dual-
Head capability. This means that each Receiver can
relay signals to one or two displays. Receivers may also
be cascaded up to three levels deep.
The Receiver supports up to 1920 x 1200 pixels and
1080p resolution, and is DDC compliant with all plug-
and-play laptops, PCs, and displays.

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 6
1.2. System Features
Supports VGA, Audio & RS232
Support up to 1,000 ft (305 m)
Support up to 1920 x 1200, 1080p (depending on
cable length)
Software and manual adjustments for brightness,
sharpness & skew
Additional 1,000 ft (305 m) via Repeater Hub
Cascadability option from Receiver
Dual head capability on Receiver
Structured cabling approach: Repeater Hubs have
RJ45 for signal distribution

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 7
2.
Technical Specifications
Active VGA Managed RECEIVER
Environment VGA, Analog Stereo Audio, RS232
Devices PC, laptops, projectors, plasma, switchers, distribution amps, touchscreen
Transmission Transparent to the user
Maximum resolution 1080p; 1920 x 1200
Connections FRONT PANEL VGA 2 Out: One (1) HD15F
Audio 2 Out: One (1) 3.5 mm stereo jack
RS232 2 Out: One (1) DB9M
Maintenance: One (1) Mini USB
BACK PANEL Power: One (1) power jack
Link In: One (1) RJ45S
VGA 1 Out: One (1) HD15F
Audio 1 Out: One (1) 3.5 mm stereo jack
RS232 1 Out: One (1) DB9M
Cascade Out: One (1) RJ45S
Maximum Distance:
Dispatcher to Receiver,
Repeater Hub to Receiver
Up to 1920 x 1200 @ 60Hz; 1080P (depending on cable length)
Up to 1,000 feet (305 meters)
NOTE: STP cables must be used in an electrically noisy environment. Also, cross-connectio
n
reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive
Use EIA/TIA 568A or 568B
straight-through wiring
Green: Pin 4 (R) Pin 5 (T)
Blue: Pin 1 (R) Pin 2 (T)
Red: Pin 7 (R) Pin 8 (T)
COM: Pin 3 (R) Pin 6 (T)
LED Indicators Sync: One (1) green LED
Power: One (1) green LED
Sharpness One (1) green LED
Gain One (1) green LED
R One (1) green LED
G One (1) green LED
B One (1) green LED
Cable Cat 5e/6 unshielded twisted pair (or better)
Power Supply 110-240V/12VDC/0.5A power jacks
Removable AC blades included for North America, Continental Europe & UK
Power Consumption 6 Watts
Temperature Operating: 0ºC to 40ºC
Storage: -20ºC to 85ºC
Humidity: Up to 95% non-condensing
Dimensions Hybrid VESA 75 mm and 100 mm Mounting Surface
Enclosure Dimensions: 5.68” x 4.45” x 1.04” (14.42 cm x 11.30 cm x 2.64 cm)
Weight 2.0 lb (0.9 kg)
Regulatory FCC, CE-EMC Directive 89/336/EE, RoHS, WEEE
Warranty Two (2) years
Order Information 500174: Active VGA Managed Receiver (Dual Head)

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 8
Active VGA Managed DISPATCHER
Environment VGA, Analog Stereo Audio, RS232
Devices PC, laptops, projectors, plasma, switchers, distribution amps, touchscreen
Transmission Transparent to the user
Maximum resolution 1080p; 1920 x 1200
Connections FRONT PANEL Maintenance: One (1) Mini USB
Link Ports: Eight (8) or Sixteen (16) RJ45S
BACK PANEL Local In:
RS232 In: One (1) DB9F
Audio In: One (1) 3.5 mm stereo jack
VGA In: One (1) HD15F
Local Out:
RS232 Out: One (1) DB9M
Audio Out: One (1) 3.5 mm stereo jack
VGA Out: One (1) HD15F
Power: One (1) power jack
Maximum Distance:
Dispatcher to Receiver Up to 1920 x 1200 @ 60Hz; 1080P (depending on cable length)
Up to 1,000 feet (305 meters)
NOTE: STP cables must be used in an electrically noisy environment. Also, cross-connectio
n
reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive
Use EIA/TIA 568A or 568B
straight-through wiring
Green: Pin 4 (R) Pin 5 (T)
Blue: Pin 1 (R) Pin 2 (T)
Red: Pin 7 (R) Pin 8 (T)
COM: Pin 3 (R) Pin 6 (T)
LED Indicators Sync: One (1) green LED
Power:One (1) green LED
Cable Cat 5e/6 unshielded twisted pair (or better)
Power Supply 110-240V/12VDC/1.25A power jacks
Removable AC blades included for North America, Continental Europe & UK
Compatible Products 500172, 500174
Power Consumption 8 Watts
Temperature Operating: 0ºC to 40ºC
Storage: -20ºC to 85ºC
Humidity: Up to 95% non-condensing
Dimensions 1U Rack Mountable
Enclosure Dimensions: 17.15” x 4.69” x 1.72” (43.56 cm x 11.91 cm x 4.37 cm)
Weight 4.8 lb (2.2 kg)
Regulatory FCC, CE-EMC Directive 89/336/EE, RoHS, WEEE
Warranty Two (2) years
Order Information 500170: Active VGA Managed Dispatcher 8 Ports
500171: Active VGA Managed Dispatcher 16 Ports

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 9
Active VGA Managed REPEATER HUB
Environment VGA, Analog Stereo Audio, RS232
Devices PC, laptops, projectors, plasma, switchers, distribution amps, touchscreen
Transmission Transparent to the user
Maximum resolution 1080p; 1920 x 1200
Connections FRONT PANEL Maintenance: One (1) Mini USB
Link Ports: Eight (8) RJ45S
BACK PANEL Local Out:
VGA: One (1) HD15F
Local In:
Link: One (1) RJ45S
Power: One (1) power jack
Maximum Distance:
Repeater Hub to Receiver Up to 1920 x 1200 @ 60Hz; 1080P (depending on cable length)
Up to 1,000 feet (305 meters)
NOTE: STP cables must be used in an electrically noisy environment. Also, cross-connectio
n
reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive
Use EIA/TIA 568A or 568B
straight-through wiring
Green: Pin 4 (R) Pin 5 (T)
Blue: Pin 1 (R) Pin 2 (T)
Red: Pin 7 (R) Pin 8 (T)
COM: Pin 3 (R) Pin 6 (T)
LED Indicators Sync: One (1) green LED
Power: One (1) green LED
Sharpness One (1) green LED
Gain One (1) green LED
R One (1) green LED
G One (1) green LED
B One (1) green LED
Cable Cat 5e/6 unshielded twisted pair (or better)
Power Supply 110-240V/12VDC/1.25A power jacks
Removable AC blades included for North America, Continental Europe & UK
Compatible Products 500172, 500173, 500174
Power Consumption 15 Watts
Temperature Operating: 0ºC to 40ºC
Storage: -20ºC to 85ºC
Humidity: Up to 95% non-condensing
Dimensions 1U Rack Mountable
Enclosure Dimensions: 17.15” x 4.69” x 1.72” (43.56 cm x 11.91 cm x 4.37 cm)
Weight 3.8 lb (1.7 kg)
Regulatory FCC, CE-EMC Directive 89/336/EE, RoHS, WEEE
Warranty Two (2) years
Order Information 500172: Active VGA Managed Repeater Hub (8 Port)

© MuxLab Inc. Active VGA Managed Receiver Installation Guide
P
a
g
e 10
3.
Installation Procedure
3.1. Parts List
The Active VGA Managed Receiver (500174) comes
with the following parts:
Base Unit
One (1) 110-240V/12VDC, 0.5A Power Supply with
three interchangeable blades
Quick Reference Support Sheet
Please verify that all parts are present before proceeding.