MWf MF-1100 Pro User manual

USER MANUAL
Metal and Water Finder
WWW.MWF-USA.COM
User guide for MF 1100 PRO, the latest
device for detecting underground minerals,
underground water, caves and voids.

Page
CONTENTS
1
Contents
Safety Information
Page
Page
Technical Specifications Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Main Control Unit
Device Settings
Get Started
Long Range Locating System
HYBRID Searching System
(LRL)
(+HYBRID)
Geophysical Searching System
Charging Setting
Nots
Metal and Water Finder
Device Parts
Device Packges
1
2
3
6
8
10
12
19
19
35
41
50
51

The user must practice before starting the detecting operations and
discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity
Read & Understand
The User's manual
before using this device
2
The operating in high voltage areas
would limit the results and
performance
Don't operate two devices with
same method of search at the
same place
The operator Must remove any
metals that might affect the
opreatin eg:Rings,watch, belt....
Any attempt to tamper the device
or unapproved maintenance
would void the warranty
Don't store in high temperature or
high humidity
It’s better to turn off mobile while
using the device.
Disconnect the batteries before
long time storage
For best power endurance and
reliability. use heavy duty and high
quality batteries thats for the devices
which work on removable batteries
Page
2
SAFTY INFORMATION

Page
1. Processing digital frequency signals to receive
the energy of the targets' electrostatic fields .
Search System : Multisystem:
1.Long Range Locating System
2.Hybrid Searching System
3.Geophysical Search System
(Ionic-Magnatic-Sound alarm)
Search Principle:
2. Sensing the energy of the magnetic and ionic fields
of the targets.
3. Survey the earth's layers and identify resistance
electrical levels of the earth, and processing
the values and analyzing them to reveal the targets.
MICROCONTLLER PIC18 & ARM 7
1.From 1 KHz To 30 KHz
Operating Processor:
Operating Frequency: 2.Special frequencies for measurement and
verification
3.Measurement of electrical resistance Ohm
Power: Two cells of Li-ion 3.7 volts ,2000 mA
Power Consumption:
Battery Life:
Charger:
Display Type:
Specialized to detects:
6 work hours
Maximum of consumption 200 mA
5,1 volt 2,1 Amp/2 hours charging
TFT Color Monitor 3.2 ” , 65.536
Color, 48Mhz , CDMA GPU
Gold - Diamond - Gold nuggets - Silver - Bronze -
Copper - Aluminium - Lead - Tin - Nickel - Platinum -
Mercury - Iron - Cave - Banknotes - Water.
Targets Discrimination:
Yes
Target Selection
system:
Yes, can choose the target type before start search
from the list of targets.
TECHNICAL SPECIFICATIONS
3

Page
4
DEPTH SEARCH::
From -15° C to 60° C
From -15° C to 40° C
Yes
Yes
Yes, by graphical interface to locate the path and
direction of the target, and Acoustic commands
It can be stored and work in the degree rate of air
humidity at level 90%
Compound: 1 kg - disjointed in the bag: 3 kg
18.9x10.4x5.8 cm
18.9x10.4x5.8 cm
OPERATING
TEMPERATURE:
STORAGE
TEMPERATURE:
HUMIDITY:
WEIGHT:
DIMENSIONS:
BAG DIMENSIONS:
VIBRATING ALERT:
VOICE ALERTS:
AUTOMATIC SMART
GUIDANCE SYSTEM:
30 M, With the ability to control the level of search
depth through the depth control interface, 300 M
for water.
2500 M, With the ability to control the levels
of the search distance through the distance control
interface.
DISTANCE SEARCH:
RESULTS FEEDBACK: Through orientation toward target location
accompanied by sound + graphical and vibration
alerts..
BLUETOOTH: Yes
WIRELESS: Yes
TECHNICAL SPECIFICATIONS

STANDARD PACKAGE
Page
5
The device offers three advanced packages according to the desire
of the device owner and according to the purpose of
the device.
This is the basic package for the MF1100PRO.
Equipped withbasic system,advanced remote sensing and
monitoring system.
Note: You can activate the rest of the systems later if you
purchase the detection unit for these systems.
DEVICE PACKAGES

Page
PROFESSIONAL PACKAGE
6
This is the MF1100PRO Professional Package This package
comes with two systems:
1 - Remote sensing and monitoring system (main one)
2- Hybrid system..
Note: You can activate the geophysical search system later
if you purchase a detection unit for this system.
DEVICE PACKAGES

Page
SUPER PACKAGE
7
MF1100PRO Premium Package This package is provided with
three systems:
1 - Remote sensing and monitoring system (The main one).
2 - Hybrid system.
3 - Geophysical search system
DEVICE PACKAGES

DEVICE PARTS
Page
8
The Main Control Unit
The main control unit of the device, through
which the search criteria and settings for the
device are determined, and it is communicated
with the attached search units via wireless
connection.
CHARGER
An electric charger to recharge the device's battery
Values: Input: 100 - 240V AC / 50 - 60Hz / 0.5A
Output: 5V Continuous / 2A / 10W.
Designed with a MICRO USB charging port to match
the universal charger system, making it easy to use
any charger available.
HYPRID SENSOR
GEOPHYSICAL UNIT
This hybrid sensor works on new technologies,
especially for the MWF group, which works to scan
and verify soil layers, identify their contents, and read
the levels of magnetic and ionic fields and radiation
simultaneously to identify and detect the locations
of gold, minerals and voids underground.
This unit works to measure the intensity of the electrical
resistance of the soil and the underground materials and
determine its identity, and its mission is to detect and prospect
for gold, minerals and underground voids with the characteristic
of accurate discrimination between targets.This unit works
through two scanning sensors only, which allows the system
to work with ease and comfort.
PROBES & WIRES
Made of the best types of stainless steel, a strong
conductor of energy and stainless, it is inserted into
the soil and connected by power wires to deliver the
measurement waves sent from the device to the soil,
to complete the measurement process in the search
area, between the two probes..

Page
9
TRANSCEIVER ANTENNAS
The main control unit of the device, through which the
search criteria and settings for the device are
determined, and it is communicated with the attached
search units via wireless connection.
REINFORCEMENT UNIT
Equipped with a built-in transmitter that works on two systems,
a signal filtering system to confirm the location of the target,
and a system equipped with ground waves with a system for
accurate transmission and enhancement of the signal, this
transmitter works with a bluetooth system to communicate with
the main unit through a special control interface to operate and
close these systems through the system interface
SOUND UNIT
This unit works to receive the sound alert system from the
main unit wirelessly and connects it to the headphone to
enjoy the feature of the voice alert through the headphone.
So we can use it in both long range and hybrid search systems.
We can control the volume or even mute the volume through
the volume control switch located at the top of the unit.
HEAD PHONES
Connect via the headphone jack located on the top of
the audio unit to hear audio alerts wirelessly..
GRIP
It is installed on the back of the main unit and is
carried through it as it allows a 360-degree circular
movement, freely and smoothly
DEVICE PARTS

Page
10
1
2
3
4
5
6
7
8
9
10
1
10
2
3
4
5
6
9
8
7
Sockets for connecting the
transmitter and receiver antennas
Display screen
Volume control key
Back key
Enter key
Power and lock switch
The key to tracking and focusing on goals
The keys move up, down, right, and left
Screen brightness control switch
Hybrid sensor connection socket
FRONT INTERFACE
THE MAIN UNIT

ﺔﻴﺒﻧﺎﺠﻟا ﺔﻬﺟاﻮﻟا
Page
11
2
1
3
4
5
1 4
52
3
BACKGROUND
Laser indicator light Charging socket
Audio output
Installation of hand grip socket
The battery compartment
THE MAIN UNIT

Note :
When the device is turned on for the first time, the device will display a
screen that enables you to choose the system language
Page
12
Turn on the device by pressing and holding ( ) on the front of the device
for three seconds.
The device will show the loading screen and then go to the main menu of
search systems.
DEVICE SETTINGS

Page
13
12345
1
2
3
4
5
Battery charge level Screen brightness level
Hour indicatorBluetooth system status icon
(activated / locked)
Volume level
Explanation of the information bar at the top of the screen of the main unit of the device
The information bar facilitates and helps to quickly read the device settings and
know its status from the battery level and brightness of the screen and know the
time during the search process.
DEVICE SETTINGS

Use the buttons ( ) to move between the menu options on the screen,
then press the button ( ) to confirm the selection and to return to any position,
press the button ( )
Page
14
Settings menu
To enter the settings menu, press the button ( ) from the main menu to move
between the settings menu windows, and then press ( ) to enter the selected
settings window, and you will find there are several options for tuning.
To exit the selected settings window, press the button ( )to move again
between the configuration windows.
To control the brightness of the screen, go to the brightness adjustment
window, then press the ( ) button, then change the brightness level from
10% to 100%.
DEVICE SETTINGS

Page
15
To set the values of the sound alerts, scroll down and press the ( ) button,
then control the volume by going to the subwoofer icon, or you can hide
the sound completely You can activate or cancel the vibration option and play
the sound of clicking the keys of the main unit, in addition to activating and
deactivating the headphones option.
To change the system language, go to the language setting window, then
press the ( ) button, then select the desired language and confirm.
MF 1100 PRO is multi-lingual, including Arabic.
To set the hour value, go to the clock setting window, then press the button
then set the time and confirm. The timekeeping watch facilitates clear
viewing and viewing of time.
Settings menu
DEVICE SETTINGS

Page
16
Settings menu
DEVICE SETTINGS
To set the bluetooth system, go to the bluetooth settings window, then
press the button ( ), then we turn on or off bluetooth through( ).
To set the password, go to the password setting window and then press
the button ( ). You can activate or deactivate the password by going to the
(disable / Enable) icons and pressing the ( ) button, and then enter
the preset password. You can also change the password by choosing the
(Change )Then enter the old password and then enter the new password,
bearing in mind that the password must consist of four digits of numbers.
Note: In the absence of a preset password from the user, the default
password from the factory is four zeros (0000)

Page
17
To reset the factory, go to the factory reset window, then press the button( )
The confirmation window appears. Select to confirm.
Verify device-product information (downloaded software version-device
model-manufacturer information-build number-serial number of device
-QRCODE image that enables you to go directly to the MWF website using
the camera of any mobile “smart phone” device).
Settings menu
Press the button ( ) to exit the settings menu and return to the main menu
DEVICE SETTINGS

Page
18
To start the search process, select the desired search system icon from
the main menu to enter the search systems.
The available search systems will appear on the screen, which are:
the long-range detection system, the hybrid search system, or
the geophysical detection system. We will explain in detail the entry of
the section (Starting work) about the interfaces of each of the systems
attached to the device.
Note :
The icons of the three systems (Long Range Detection System, Hybrid
Search System, or Geophysical Detection System) will only be activated
if you have the Ultra Package from the device.
DEVICE SETTINGS
Start Search

START WORKING
page
19
Many new technologies added to our long-range locator system, exclusive technology is
unprecedented, this system works to detects and locate targets from far distance it directs the
user and his leadership to the targets location directly
Embedded system for sensing and detection, where the device can detect the targets through
heading towards to target and is accompanied by acoustic alarm indicator towards the target
accurately
Automatic smart guidance system, to locate the path and direction of the target, through a
special graphics interface, where this system gives the user automatically identify and vision
about the direction and location of the target
Smart control interface to adjust the levels, search capabilities, and the type of target you
want to search for, too
Targets List, composed of 15different targets can choose any target from this list to search for
it separately, and targets is: Gold – Diamond – Gold nuggets – Silver – Bronze – Copper –
Aluminium – Lead – Tin – Nickel – Platinum – Mercury – Iron – Cave – Banknotes – Water
Interface of accurate setting for search parameters, Multilevel to pre-control levels of depth
and distance of the search
Depth up to 30 meters with a control property in the signal level of the searching depths,
through depths options list, and starting from up to the selected depth: 1m – 3m – 5m – 7m –
10m – 15m – 20m – 25m – 30m
Distance search up to 2500m, with a control property in the level of front broadcast wave,
through distance options list and starting from 100m up to the selected distance: 100m –
250m – 500m – 750m – 1000m – 1250m – 1500m – 2000m – 2500m
The guided laser function is can be switched on or off from the system interface
Equipped with built-broadcast device works on two systems, signal filter system to confirm
target site, and ground transmitter system to strengthen of the signal
System features
LONG RANGE LOCATOR
(LRL)
Long Range Locator System