
voltage is not stable, we suggest users add a voltage regulator with matching
power between the mains supply and the equipment.
(3) To guarantee the equipment's curative effect and normal service life, please
uniformly use specified parts provided or suggested by the original manufacturer.
(4) The equipment can't be placed in damp places or near water, and it also can not
be exposed to direct sunlight.
(5) Please don't place the equipment near an intense heat source since this may
affect its service life and everyday use.
(6) Please remove all the metal objects from the body before use to avoid
unexpected situations which may affect the curative effect.
(7) Please refrain from using the equipment to aim at eyes, thyroid, parathyroid,
testicles, pregnant woman's abdomen, pacemaker, etc.
(8) Those suffering from an illness should use it with caution unless they get
permission from a doctor.
(9) Please turn the equipment's power switch off if no one uses it, and ensure the
main power is off after everything was settled. Thus the safety of the equipment
can be guaranteed.
(10) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. The course of treatment shall be extended
if you want to have it started immediately.
(11) Don't use the equipment with an empty stomach, and wait for at least 1 hour
after a full meal before starting the course.
(12) When operating, fasten laser pads onto the client first, turn the equipment on,
and adjust energy level(which should be set from low to high slowly to make the
client feel warm and comfortable.
(13) When using this equipment, parts to be treated must be kept moist not to
damage the laser pads.
(14) When using laser pads, its whole surface should contact the skin thoroughly and
can't only touch a small area.
(15) A better effect can be achieved with the combined use of laser pads with
massage and other equipment.
(16) Laser pads can also be used separately. Just fasten it onto the fat part for about
30 minutes. A better effect can be achieved with the combined use of the hands'
technique.
(17) After the operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene and extend its service life.
(18) Use the equipment and train the operators in strict accordance with the
instructions specified in the manual.
4. Troubleshooting & Solutions
(1) The equipment can't be started, and the buttons in its back are not lighting up?
A. Make sure the power cord is plugged into a suitable power socket.
B. Check whether the fuse in its back is loose or burnt out.