mychway MS-1150C User manual

User Manual
MS-1150C

Preface
Dear Users,
We’re pleased to present to you our latest beauty machine MS-1150C,
which adopts vacuum&cooling technology for reducing fat on chin area.
It is a professional beauty machine, which needs to be handled by
professionals with proper training. Any improper use will result in
adverse outcomes. Therefore, we advise any personnel to read this
manual thoroughly and follow the instructions strictly before operation.
We believe our quality product will bring in good returns on your end.
Also, you can count on our worry-free after-sales service.
Thank you!

Table of Contents
Preface
Part I
Introduction
Advantages
Working Principles
Effects
Applicable Range
Inapplicable range
Dos and Don’ts after Operation
Part II
1. Detailed Operations
2. Technical Parameters
3. Dos and Don’ts
4. Troubleshooting & Solutions
5. FAQs
6. Packing List
7. Simplified Treatment Steps
8. Operational Diagrams

Part I
Brief Introduction
This vacuum&cooling machine is one of the most popular ways to reduce fat on chin area. So,
this machine can replace all facial fat-reducing treatments in beauty salons. Moreover, it is
convenient and easy to operate. It can solve both skin and body management problems for
beauty-seekers. Used externally during the whole process, this equipment requires no injection,
no medication, and no operation, for which it has no side effects. Vacuum&cooling treatment is
non-invasive fat-reducing approach, targeting the adipose cells on specific areas of body to
reduce fat thickness for a noticeable figure curve.
Advantages
1. The whole process is performed without incision and anaesthetic.
2. It will not cause skin unevenness.
3. It will not cause bleeding or swelling.
4. It can bring you remarkable effects and prevent the reappearance of unwanted fat.
5. It will not cause any damage to skin and bring no inconvenience to your life and work.
6. It can effectively relieve edema and reduce cellulite.
7. It can effectively tighten skin.
8. It can reduce stubborn fat like cellulite.
9. It can build ideal facial curve.
10. It causes no damages to nerves, blood vessels and skin.
11. The cooling energy only targets the fat layer, causing no damages to viscera.
Working Principles
Vacuum&Cooling
The freezing point of water is 0℃while the freezing point of fat is 4℃, which we can make use
of to achieve the purpose of reducing fat.
The vacuum&cooling treatment makes use of vacuum to treat fat. Fat will be targeted and
cooled down. During the process, heat in the fat layer will gradually disappear. When the
adipose cells are cooled down to 0℃, they will die. The low temperature destroys adipose cells,
causing no damages to skin or muscles. The dead adipose cells will be excreted from body by
liver without external energy.
Biological Effects
Human body consist of 60%-70% water. The freezing point of water is 0℃. But fat has different
property. Fat congeal from the temperature of 4 ℃. Using such property difference, this
machine is able to reduce fat. During the treatment, the corresponding handle will be put on fat
area, and the fat will quickly congeal into jelly-like substances. And then the
phagocytosis(phagocytes engulf and digest microorganisms and cellular debris) will happen. The
dead cells will be treated as waste by the body and will be excreted in 2-4 months. So, this
treatment can not make you see immediate effects but you can feel the fat is gradually removed
in two weeks to a month.
It can help reduce fat and promote blood circulation and lymphatic circulation to remove waste
in the body. Additionally, the dead adipose cell are also removed from the body and so it can

effectively prevent the reappearance of fat accumulation.
Effects
1. Dissolve fat to destroy thick fat accumulation and cellulite
2. Help reduce fat on specific areas
3. Relieve the condition of double chin and build V-shaped face
4. Stimulate collagen regrowth and slow down ageing.
Applicable Range
1. Those have saggy skin
2. Those who do not have pronounced facial curve.
3. Those who suffer from edema on face.
4. Those who have double chin and fat accumulation on neck.
Inapplicable Range
1. Those who have just undergone plastic surgery with prostheses and metal materials
implanted at the operation area.
2. Those who have used injections recently, such as hyaluronic acid, skin booster or wrinkle
removal product.
3. Those who have hypertension, heart disease, diabetes, severe hyperthyroidism, malignant
tumor, etc.
4. Those who are in allergic period and have severely sensitive skin and metal allergies.
5. Those who have trauma or wound on the skin.
6. Those who are of advanced years.
7. Those who are in menstruation, pregnancy, and lactation or who are recovering from
operations.
8. Those who have skin diseases and infectious diseases.
9. Those who have unrealistic expectations about the effect.
10. Those who are taking anticoagulants, vasodilators, corticosteroids and other drugs or who
have been taking them for a long time. Those who have liver diseases.
Do’s and Don’ts after Operation
1. Wash face with hot water within 3 days
2. Keep hydrated and prevent skin damages caused by sun ray
3. Do not use irritating products within one week such as AHA, scrubbing and exfoliating
products

4. Do not stay up late, smoke cigarettes and drink alcohol. Eat more fruits, vegetables and light
foods.
5. Apply face mask at least 3 times in the following week.
Part II
1. Detailed Operation
After checking all are connected properly, the starting interface will appear when the power
switch is pressed.
Function Selection
Time display and adjustment. 10-30 minutes on a single area is
recommended. 10 minutes is recommended for first-time users. After adapting to it, you can
take longer treatment.
button for decreasing time
button for increasing time
temperature display and adjustment(recommended
temperature: -2℃to 3℃. 5℃is recommended for the first-time users. After they adapt to it,
the temperature can be lowered slowly.
button for lowering temperature
button for increasing temperature

start/stop button
home button
reset button
temperature indicator. When the temperature of the handpiece is abnormal, it will show
an alert
water container indicator. When there is a lack of water in the container or something
abnormal happens to it, it will show an alert.
knob for adjusting suction. Set suction at a relatively low level if you use it for the first
time. After the handpiece touches skin, you can turn the knob to slowly raise suction level. Do
not suddenly raise the suction to the maximum level.
2. Technical Specifications
Voltage AC110V/220V 50-60Hz
Vacuum 650mmHg
Pump flow rate 60L/min
Vacuum pressure 0-100Kpa
Freezing temperature: -10℃to 15℃
3. Dos and Don’ts
1. The plug with grounding pin must be used before the instrument is used and the power
socket of the instrument is properly grounded.
2. Ensure that the voltage of the instrument is suitable. If the voltage of the local power supply is
not stable, we suggest that the user add a voltage regulator with matching power between the
mains and the instrument.
3. In order to ensure the treatment effect and normal service life of the instrument, please use
the specified parts provided or suggested by the original manufacturer.
4. The instrument should not be placed in damp places or near water sources, and should not be
directly exposed to sunlight.
5. Do not place the instrument near a strong heat source, as this may affect the life and normal
use of the instrument.
6. Before treatment, please remove all metal objects from the body first, so as to avoid
unexpected conditions and influence the curative effect.
7. Please restrain from using the device on eyes, thyroid, parathyroid, testicles, abdomen of
pregnant women, and pacemakers.
8. Patients who are suffering from illness should consult with a doctor and gain permission from
the doctor before use.
9. Please turn off the power switch of the device, and ensure that the total power supply of the

device is turned off before the staff leaves after daily use, so as to ensure the safety of the
electrical products.
10. Use this machine or train the operators in strict accordance with instructions in the user
manual.
11. Make sure the handpiece is in full contact with skin.
12. The corresponding frostbite-proof membrane must be applied during the treatment. Do not
perform the treatment on dry skin or let the handle directly touch skin.
13. Clean the instrument with normal saline (do not use ethyl alcohol) after operation to ensure
its cleanliness and hygiene and prolong its service life.
4. Troubleshooting & Solutions
1. The instrument cannot be started, and the button light on the back of the instrument does
not work?
A. Make sure the power cord is connected to the socket with normal power supply.
B. Whether the fuse on the back of the instrument is loose or blown.
2. The machine works for a while but then stops?
A. It may be because there is no strong water flow or the machine doesn’t sense the presence of
water flow.
B. Check whether there is enough water in the water container.
3. There is a red alert on the water container indicator?
A. Please check whether the water level in the water container is low
B. Please check whether there is something wrong with the water container.
4. I can start the instrument, but the screen shows erroneous message?
A. Please unplug the power plug behind the instrument and wait for about 1 minute before
restarting the instrument.
B. If the above method cannot solve the problem, please contact the instrument dealer for
assistance.
5. FAQs
1. Does the vacuum&cooling handle have side effects in reducing fat?
A: It is a totally non-invasive and painless. Based on the fact that adipose cells are more
vulnerable to coldness than other cells, it can cool down adipose cells and remove them. What’s
more, it only targets adipose cells instead of other tissue, and so it will not cause damages to
skin or muscles. The dead cells will be excreted from body through metabolism, so it has no side
effects.
2. How does this treatment help reduce fat?
A: It can cool down subcutaneous tissue to 5℃. And then adipose cells will gradually die, which
will be excreted from body through metabolism. In this way, it can help reduce fat.
3. How long will it take before we see the effects after the treatment?
A: Normally, you will see the effects in 1-2 months. It depends on individual constitution and
metabolism. Based on the fact that adipose cells are vulnerable to coldness, this treatment can
cool down and destroy adipose cells under the low temperature of 5℃, which can be excreted
from body through metabolism. So, you should wait for some time to see the effects.

4. Why do we need to use special frostbite-proof membrane during the treatment?
A: The main constituent in this kind of membrane is organic molecules, which are concocted
based on the characteristics of human skin. Clinical trials have shown that the use of the
membrane in this treatment can effectively protect skin from frostbite.
6. Packing List
1 x Machine Body
2 x Chin handle
1 x Handle holder
1 x Filter
1 x Power line
7. Simplified Treatment Steps
1. Wish chin clean with towel
2. Apply the frostbite-proof membrane
3. Set parameters
4. Put the handpiece on chin area
5. Wait for several minutes and then remove the handpiece
6. Remove the membrane and wipe the area clean
Needed product: frostbite-proof membrane
8. Operational Diagrams
Parameter
Adjustment
Product
Techniques
Diagrams
Waist&Abdomen Shaping: 30 minutes once a month
Vacuum&Cooling
Temperature: -
2℃to 3℃
Time: 10-30 min
Suction: adjust it
based on
individual
endurance.
Setting it at
lowest level at
the beginning is
recommended to
avoid discomfort.
Towel+Frostbit
e-proof
Membrane+th
is machine
1. Clean chin area with
towel
2. Choose proper frostbite-
proof membrane and apply
it to the treatment area
according to the size of fat
area.
3. Set the temperature,
time and suction of the
handle.
4. Fix the handpiece on the
fat area. Adjust the suction
level based on customer’s
Please note: you
will have the
obvious sensation
of being tightened
on chin.
Chin may
experience slight
swelling, redness
and other mild skin
reaction after
treatment, which is
normal. You don’t

endurance. Wait for 10-30
minutes.
5. Remove the handpiece
and membrane. Wash the
treated area clean.
6. The end.
need to worry
about that.
Treatment Suggestions
One course of treatment consists of 4 treatment sessions. After one treatment, the
conditions of redness, swelling, blood stasis, and numbness will disappear in 1-2 weeks.
And in the second week, you will feel fat is reduced slowly. And obvious results will be
seen in about 2 months. The fat will be averagely reduced by 22% in thickness. Of
course, the effect varies with personal situation. After one course of treatment, fat on
chin will be greatly reduced. Your double chin will be gone and you will have firmed skin
and pronounced facial curve, and thus your look will become more attractive. In the
later stage, you can take the treatment once per two months to consolidate the effect.