SM-271 Instruction
PRINCIPLE:
This product uses Low-frequency circuit to raise the input voltage to 3000V~5000V.
When the body touches the ozone bulb, high tension goes through inert gas inside the
bulb, the human body, and earth to form a loop. When high tension goes through inert
gas inside the bulb, the inert gas will ionized oxonium ion “O”. Oxonium ion together with
oxygen in the air regenerates ozone O3.That is O+O2=O3. So it can give the sterilization
effect by using this product.
EFFECT:
1、Strong oxidation of ozone have the effect of disinfection
2、In long-term use, it can help oxidation to resolve heavy metals, toxic, sulfide and other
harmful substances accumulated in the body
PROCEDURE
1、Plug the power supply pin into the power
supply jack
2、Open the safeguard cover of the ozone bulb;
3、Press the power supply switch (ON/OFF
key), power pilot lamp(P) and low gear lamp(L) are
on means that the mainframe is on working state;
4、Gear selection key(VOL), press it the first
time, change to Middle gear lamp(M) is on. Press
it the second time, High gear lamp (H) is on. Press
it the third time, it goes back to low gear lamp. This
key can change the gears in turn.
5、Press ON/OFF key again，this product will
shut down.
Note：Every time you press the key, you will hear a
“B”sound.
ATTENTION:
1. This machine is electronic product and have fragile element, please keep away from
water and don’t strike it
2. Please use alcohol to clean the ozone bulb before and after use; Don’t use benzene or
other chemical solvent to clean it.
3. People with infectious skin should not share this product.
4. This product is strictly prohibited to repair, demount or alternate by oneself. If it causes
problems in such way, the consequences are on one’s own.
