mykin MVD7 User manual

my vented dryer
my quick start guide

OPERATING YOUR DRYER
• Turn your dryer on by pressing the
Power button.
• Select your desired drying program
by pressing the Program button.
• Select the Dryness Level and
Anti-Crease buttons if you wish to
 selectdierentoptionsfromthe
default settings.
• Begin your cycle by pressing the
Start/Pause button.
AT THE END OF THE CYCLE
• The dryer will alert you with an
audible sound once the program
 hasnisheditscycle.
• Turnyourdryerobypressingthe
Power button.
• Oneortwominutesaeryouhave
 turnedothedryer,takeoutyour
dry clothes.
• Besuretocleanthelintlteraer
each use.
CLEANING THE FILTER
• Makesurethedyerhassafelycooled
down before cleaning the dyer or any
of its parts.
• Toremovethelter,openthedoor
 andgripthelter(➍)andpullit
straight up and out of the drum.
• Cleanthelintlterbywipingitwith
 aso,dampcloth,orwashitgently
under running water.
• Allowtheltertodrycompletely
before reinstalling it. Press down
gently to secure it in place.
ANTI-CREASE FUNCTION
• Press the Anti-Crease button to
 activatethisfunction.
• Aerthedryingprogramhasnished,
the dryer will continue to rotate
 thedrum(withoutheatoutput)fora
 maximumtimeof2hours,oruntilthe
door is manually opened to minimise
creasing of your load.
BEFORE EACH USE:Checkthatthelintlter(➍)
is clean and the drum is drained. When you load
theitemsintothedryerdrum,ensurethereis
nothingblockingthedoorandthatitclicksshut.
Model: MVD7
Support: 1300 11 4357
www.mykin.house
part of the family
Key
➊ Controlpanel
➋ Door
➌ Dryingdrum
➍ Lintfilter
➎ Frontventflange
getting me started
1
2
4
3
5