Mylaps X2 Club User manual

ENGLISH
MANUAL
X2 Club
Timing system
PRODUCTCODE
00012345
VERSION 1

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 2
Published by:
MYLAPS B.V.
Zuiderhoutlaan 4
2012 PJ Haarlem
The Netherlands
Copyright© 2020 No part of this document may be reproduced by any meanswithout the written consentof the publisher.
Whilst every care hasbeen taken to ensure that the information inthis document is correct,no liability canbe accepted by
MYLAPS for loss, damage or injury caused by any errors or omissions in this document. The sale of products, services of
standard Terms and Conditions of Sales. Thisproduct
publication is provided solelyfor informationalpurposes.
All hardware and software product names used in this document arelikely to be registered trademarks and must be treated
accordingly.
Manual revision history
Version
Date
Amendments
Version 2.0
Version 2.0
May 2018
November 2020
2.0
Changed theauxialliary scheme

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 3
1. How to use this manual
Search for Keywords
Search for keywords suchas to find a topic. Press Ctrl+F onWindows or Command+F on Mac.
Navigate Topics
View a completelist of topics inthe table of contents. Click on a topic to navigate to thatsection
Printing this Document
This document supports highresolution printing.
Legends
Hints and Tips Important Reference
Download options
X2 utility
About this Manual
This manual is intended for operating andsupervisorypersonnel and provides information on installing and operatingthe X2
timing system.
This publication has been written with greatcare. However, the manufacturer cannot be held responsible, either for any
errors occurringin this publication orfor their consequences.
The sales
Conditionsof Sales and thisproduct manual is provided solely for informational purposes. Thispublication is to be used for
the standardmodel of theproduct type given on the cover page.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 4
Contents
1. How to use this manual...................................................................................................................................................................................3
Legends........................................................................................................................................................................................................................3
Download options ..................................................................................................................................................................................................3
About this Manual...................................................................................................................................................................................................3
Contents.......................................................................................................................................................................................................................4
2. General.....................................................................................................................................................................................................................5
2.1. X2 Timing system products.............................................................................................................................................................................................................................7
2.2. Specifications X2 Decoder................................................................................................................................................................................................................................9
2.3. Specification X2 Server....................................................................................................................................................................................................................................10
2.4. Specifications Environmental......................................................................................................................................................................................................................10
2.5. Safety instructions...............................................................................................................................................................................................................................................10
2.6. Compatibility..........................................................................................................................................................................................................................................................11
3. Installation of the X2 Timing system ......................................................................................................................................................13
3.1 Installation X2 system X2 decoder and X2 server......................................................................................................................................................................14
3.2. Installation X2 system.......................................................................................................................................................................................................................................16
3.3. Installation of a detection loop on an asphalt track....................................................................................................................................................................17
3.4. Installation of a detection loop on a dirt track................................................................................................................................................................................20
4.Operating the MYLAPS X2 server ..............................................................................................................................................................23
Information display status of the X2 Server...........................................................................................................................................................................................23
5.Operating the MYLAPS decoder................................................................................................................................................................25
5.1. Noise level.................................................................................................................................................................................................................................................................25
5.2. Signal strength.......................................................................................................................................................................................................................................................25
5.3. Number of hits.......................................................................................................................................................................................................................................................25
5.4. Firmware update..................................................................................................................................................................................................................................................25
5.5. The decoder............................................................................................................................................................................................................................................................26
5.6. Information display status of the decoder.....................................................................................................................................................................................27
5.7. X2 decoder menu................................................................................................................................................................................................................................................28
5.8. Main menu...............................................................................................................................................................................................................................................................29
5.9. Sub menu..................................................................................................................................................................................................................................................................29
6. MYLAPS X2 Utility Software ........................................................................................................................................................................30
X2 Server settings.........................................................................................................................................................................................................................................................35
X2 Decoder configuration......................................................................................................................................................................................................................................40
7.Appendix Auxiliary Connections ...............................................................................................................................................................44
8. Support.................................................................................................................................................................................................................46
CE Declaration of Conformity MYLAPS X2 Club Decoder .................................................................................................................47
CE Declaration of Conformity MYLAPS X2 Club Server ......................................................................................................................48

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 5
2. General
The X2 systemis the next generation MYLAPSplatform for Car, Motorbike and Kart racing. It offers extensive insights in race
activity, track status andmore.
timekeepersand federations get a more stable system with detailed track information and racers get toaccess live race data,
-boarddisplays.
Features and benefits of the X2 system.
Automatic upload to MYLAPS.com
The X2 systemautomatically uploads practicedata of a transponder to a personal MYLAPS account on mylaps.com.
Supports multi-loop setups
A multi-loop set-up makes sector timing atthe track possible. Race data can be segmented for eachsector, allowing racers to
focus and improve on specificparts of the track.
One system for all sports
With the X2 system it is possible totime all motorized sports, like car, motorbike,kart and MXracing*.
*One transponder typeper session
2-way communication
X2 Link willbring 2-way communication to the race track:data is not only transmitted from the X2 Transponders to the
System, but it will be possible to send vital race data backto the racer, which is displayed through their own on-board
displays.
Track analysis & remote control
The system offers insight to system performance. Diagnosticscan be accessed and controlled remotelywhen connected to
the Internet. Timekeepers can set-up and monitor the system from everywhere; a perfect solution for checking in on free
practice runs and race days.
Live timing
X2 enableslive timing whichmakes it easier to broadcast real-time race data. Data canbe published ondisplays onthe track,
on websitesor via mobile apps and third-party applications.
Develop custom apps
A SoftwareDevelopment Kit(SDK) is available with the X2 System,which enables developers tobuild custom applications.
Remote support
The X2 Systemis characterized by the highbuild qualityand ease ofuse. Still, issues may occasionally occur. When
connected to the Internet, online supportvia the X2 Cloud is at hand.
With the full X2 set-up installed to the vehicles, racers get access to 2-way communication including live race data onto their
current on-board display.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 6
What to do when you receive your X2 Timing System
After receiving your X2 system:
Install your X2 system atyour track
Place the coax cable
Place the loop at the installation
Implement the network configuration
Install Orbits and connect to the X2 System
Configurate Clock sync
Download X2 Utility
After receiving Orbits
Install Orbits
License Key
Create or use MYLAPS Support Login
Connect to X2 Server
Test transponder passings
Login or create anorganisation accountto upload to
Speedhive and LiveTiming
Login to Speedhive Race Portal
Create your track
Select the rights sport (transponder type) otherwise no
detection (either in X2 Utility or in Orbits)
A week before your event:
Create yourevent
Create competitors list with transponder numbers
Check loop connection andnoise
Check loop passings with the transponders
Check Orbits connection to X2 server
Create backup of Orbits
During your event:
Check live timing
After your event:
Upload results to the MYLAPS Website
Create backup and save it on a flashdrive
Sport settings
Make sureyou select the right sport (transponder type)otherwise no detection (either in X2 Utility or in Orbits)
If you use aKart transponder, your settings must be Kartas well.
Track Sensor (optional)
This device is monitoring:
•24/7 your system if it is working correctly
•Track temperature

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 7
2.1. X2 Timing system products
Product
Product code
What
X2 decoder andX2 server
including cabling
For the first-timeline
15R091 (choose your sport)
Detection loop - 10 meter
Incl. coax cable - 20 meter
incl. coax cable - 50 meter
Incl. coax cable - 100 meter
Detection loop - 20 meter
Incl. coax cable - 20 meter
incl. coax cable - 50 meter
Incl. coax cable - 100 meter
(Choose yoursport)
30R001
30R002
30R003
30R004
30R005
30R006
Detection loop end box
10 meter
20 meter
(Choose yoursport)
30R010
30R011
Connection boxwith Coax cables:
20 meter
50 meter
100 meter
30R020
30R021
30R022
X2 Utility
Download
1-3 timelines
X2 Manager
Download
3 timelines andup
Orbits 5
25R035
Up to maximum of 5 timelines
Orbits 5 advanced
25R036
Up to maximum of 15 timelines
X2 decoder including cabling
15R092 (choose yoursport)
X2 Server including cabling
15R093 (choose yoursport)
X2 BaseLink
15R101

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 8
USB Transponder Tester
40R117
X2 track sensor
40R106
Lemo adapter
40R045 (choose yoursport)
LoopTest set
40R234
X2 RaceLink
19R001
X2 transponder Car/Bike
Rechargeable:
1 year - 10R601
2 year - 10R602
5 year - 10R605
DirectPower
1 year - 10R611
2 year - 10R612
5 year - 10R615
X2 transponder Kart
Rechargeable:
1 year 10R641
2 year 10R642
5 year 10R645
DirectPower
1 year - 10R651
2 year - 10R652
5 year 10R655
X2 transponder MX
Rechargeable:
1 year 10R661
2 year 10R662
5 year 10R665
DirectPower
1 year - 10R671
2 year - 10R672
5 year - 10R675
Subscription cards
For every subscriptionwe have
subscription cards. These can be
redeemed in your account.
Subscription renewals
Can be renewed in your account
Account.mylaps.com

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 9
2.2. Specifications X2 Decoder
Dimensions
220 x 180 x 60 mm / 8.7 x 7 x2.4 inch
Weight
1500 g / 3.3 lb
Decoder Clock stability
0.5 ppm
GPS Receiver
Quick fix, -160dB, 15nS
GPS antenna connection
SMA, active
Dual Decodingcircuitry up to
-100dBm sensitivity, TranX3 andX2 transponder range
Decoder Timing Resolution
0.001 s
Loop Telemetry
32 kbps, 8bytes per hit
Loop connection
1x BNC, max. 20 m loop
Operating temperature range
-20 to 50 C / -4 to 122F
Humidity range
10 % to 90 % relative
Operating voltage range
10 to 14.4 V,typical 12V
Power consumption
Approx. 5W
Network Interfaces
10-100BT (RJ45)
Auxiliary connections
1x 5VDC, 100mA, output
1x Opto coupled closing contact
Max. 50mA, output
3x Opto coupled, 5-12 VDC/5-15 mA, input
Auxiliary connector
DB15, female
Can Connection
Future use
Digital outputs
•Number of connections 1
Opt1 DB15 pin 14(+) and pin 4(-)
•Isolation Opto coupledphoto-transistor
•Signal type Closing contact
•Max. switched current 50mA (DC)
•Max. switched voltage 70V (DC)
Digital inputs
•Number of connections 3
PhotoCell DB15 pin 7(+) and pin 6(-)
ExtSt DB15 pin 13(+) and pin 12(-)
Sync DB15 pin 11(+) and pin 10(-)
•Isolation Opto coupledphoto-transistor
•Timestamp accuracy 0.0001 second
•Required drive current (high) 10mA
•Switch voltage range 5-12VDC
Power output
•Voltage 5VDC
•Max current 100mA
•5V DB15 pin 8, 15
•Gnd DB15 pin 1, 5, 9

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 10
2.3. Specification X2 Server
Material
Aluminium
Dimensions
220 x 180 x 60 mm / 8.7 x 7 x2.4 inch
Weight
1800 g / 3.9 lb
AC Voltage (external power supply)
100 to 240 VACat 50/60 Hz
DC Input voltage
10 to 14.4 VDC,typical 12 VDC
Power consumption
Max. 15 W per connection
Network Interfaces
10-100BT (RJ45)
GPS receiver
Quick fil, -160dB, 15 nS
Storage
120GB, solid state
Cooling
Passive
Internal battery
30-secondsoft power down afterpower loss
Communication
Network apparatus (for internet/local network)
2.4. Specifications Environmental
Pollution degree
III
Protection class (rear lid closed)
IP54
Operating temperature
-20 to +50 °C (-4 to +122 °F)
Relative humidity
Max. 90%, non-condensing
2.5. Safety instructions
Clean only witha dry cloth.Do not use liquid cleansers oraerosol cleaners.
Do not installequipment near any heat sources such as radiators, heaters, stoves or other equipment that produce heat.
Never spillliquid of any kindon the equipment.
Take precautions toprotect the equipment formpower andlightning surges.
Adjust onlythose controls specified in the operating instructions.
Operate the equipment onlyfrom the type ofpower source indicatedon the label.
Unless qualified, do notattempt to service damagedequipment yourself.
Use only accessories specified by the manufacturer.
The low voltage powersupply unit must comply with EN/UL 60950. The power supply must be aSELV-LPSunit or aSELV-
Class 2 unit (Safety Extra Low Voltage Limited Power source).
Use only a +12VDC power supplyor PoE as apower source. The power supplyunit mustbe isolated from earth.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 11
2.6. Compatibility
Specifications are subjectto changewithout notice.
TR2 Transponder
X2 Transponder
X2 Link
X2 Baselink
X2 Pro transponder
Flex Transponders
Classic transponders
Tranx transponders
Tranx 260 DP transponder

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 12
Tranx Pro
Rental kart fixed power

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 13
3. Installation of the X2 Timing system
The X2 systemconsists of several high-quality parts.
Detection loops and coax cables urface atthe start and finish line and at intermediate timingpoints along the
the decoder.The detection loops forX2 are similar
have to install new loops.
X2 Server
The X server is the center piece of the X2 timing systemand controls the entire system. The server is connected to all
decoders collects all data of all decoders. TheX2 server has a built-in practice mode that allows automatic uploadsof practice
results to MYLAPS.
X2 Decoder
The decoderdetermines theexact time at whicheach transponder passes the detection loops. The decoder sendsthis data
to the server.
X2 utility
The X2 Utility can be used to performmaintenance operations on theX2 server. These operations include tasks like firmware
upgrades and configuring the server.
Orbits
Orbits is software used for turningthe timing information,generatedby the X2, into scoring information.
Develop custom apps
A SoftwareDevelopment Kit(SDK) is available with the X2 System, whichenables developers to build custom applications.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 14
3.1 Installation X2 system X2 decoder and X2 server
Use the coax cable to connectthe (Start/Finish) track loop
to the (S/F) decoder.
Attach the GPS antenna to the decoder and position the
antenna in a locationwhere it canreceive a satellite signal.
Note: The real time clock(RTC) in the decoder ispre-set
with the correctUTC time.This will bedisplayed on the
main decoder displaywith a clock icon. TheGPS signal
helps synchronize the decoder clock to UTC time at power
down.
If required, use the auxiliary port to attach auxiliary
equipment to the decoder:
Use the UTP cable to connect the red port on the server to
the decoder:
decoder to the server (use anoptional switch if more
decoders are used)
Attach the GPS antenna to the server:
receive a satellite signal
to the satellite UTCtime*
*when no GPS signal is available, the server will always sync to the main
decoder
Attach the 12 VDC power adapter to the decoder and to
the AC mainspower supply:
immediately
icon Note: The real time clock (RTC) in the decoder is pre-
set with the correct UTC time.This will be displayed on the
decoder display together witha small clock icon. Any extra
connected decoders and theserver (with no GPS)will
synchronize tothis main (S/F) decoder time and display the
same time togetherwith the network time protocol (NTP)
icon

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 15
Attach the 12 VDC power adapter to the server and to the
AC mains supply:
immediately rsupply icon
and the time (synchronized initially from themain decoder
and eventually from GPS)
show a satellite iconwith a signal strength indication
Optionally,you can connectthe server to a PoE switch for
an alternative power supply. Inthis case, the displaywill
show a PoEpower supply icon.The PoE supply can also be
used together with a DCpower supply. In this case the PoE
(+) supply is a secon -
power supply is disconnected,the Server display willshow
a blinking DC icon.
Note: When using a PoE (+) switch,the MYLAPSX2 Server
can be powered overa single UTPport. In this case any port
can be used, and the display willshow a PoE or PoE+ icon.
Use the UTP cable to connect the blue porton the Server to
a local computer network, or toa laptop. The LEDs on the
port will show if a physical network connection is available:
configured to obtain an IP
address automatically.
address froma DHCP server.
he
display will show an IPaddress inthe 169.254.x.x range. This
will occur, for example, whenthe network port is
connected directly to a laptop via a UTP cable.
When the IP address is shownon the server, you have
successfully completed installation
Uninstall X2 system X2 decoder and X2 server
Disconnect power to the server
close down
Disconnect power to the decoder(s)
Wait untilpower down is completed and server and decoder displays are empty.
Disconnect all physical cables from server and decoder(s).

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 16
3.2. Installation X2 system
Sport
Loop width
Car/Bike/MX/Kart
60 cm (2ft)
Setting up and operating the MYLAPS X2 decoder may only be done by certified professionals.
To install the MYLAPS X2 Timing System,one needs to install adetection loop, connectthe decoder, server and mount the
MYLAPS X2 transponders to the cars/bikes or karts.
When youset up a track, make sure your have enough network cables on the right place.
Contact a network administrator if you wantto use morenetwork cables.
The MYLAPS X2 decoder is a precision instrument.Therefore, please handle itwith care and keep the MYLAPS X2decoder
out of direct sunlight and avoid high humidity. Take special precautions in case of thunderstorms by disconnecting all cables
(coax, Ethernet and mains)from the MYLAPS X2 decoder. Nearby lightningstrikes candamage the decoderwhen these
cables are connected.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 17
3.3. Installation of a detection loop on an asphalt track
Positioning the detection loop
All wiring of the detection loop must be installed accordingto the drawingbelow to avoid a serious degradation in the
performanceof the system
Pre-Installation considerations:
•The detectionloop mustbe positioned in such away thatthe transponder is above the centre of the detection loop
when the front of thevehicle crosses the finish line.
•The width of the detection loop should exceed thewidth of the trackby 60cm/2ft (30cm/1ft oneach side, see
overview above).
•The detectionloop can be used for a track widthof a maximum 12 m (66 ft).
•The detectionloop is sensitive to interference, sometimesemitted by cables. If possible,keep other cables 5 m (15 ft)
away from the detection loop.
•To avoid false inputs,make surevehicles on other parts of the track will notget closer than 5 m (15 ft) to thedetection
loop.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 18
Installation of a permanent detection loop in asphalt
Installation overview
1. dry. This willensure a perfectseal when thesilicon is applied after the installation of the wiring. Put the wiresof the
detection loop in the slots and cut the excesslength of the detection loop wires.
2. Widen the slot with a chisel where the small connection box of theloop is to be installed. Place the connectionbox
vertically. When all wiresare installed,put the heat shrinkage sleeve over a detection loop wire end.
3. Solder the loop wire to the wire endof the connection box with activator. Whensoldering the wires together, the
solder should flow through the entire connection and notonly around it.
4. Put the shrinkage sleeveover the soldered connection and hold it over a heat source to shrinkthe sleeve.
5. Repeat c, d,and e for thesecond wire of the detectionloop.
6. Test the loop as described in section 3.
7. Fill the slot withsilicone.
Be sure not tooverfill the slots and thatthe silicone is fully under the surface of the track, otherwise tires may pull out the
silicone. If any siliconespills out of the slot, remove the excess silicone byscraping the top with a small piece of cardboard.
This also ensures thatthe silicone ispressed into the slot for a perfect seal.

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 19
Learned by experience
If you wish,you may pad the slots witha backing rod or nylon cord before sealing the slot with silicone. This helps to prevent
the excessiveuse of silicone and is also usefulwhen pulling out the silicone ifthe detection loop must be replaced.
Silicone types There is awide varietyof silicone types available in hardware stores; it is important that the right type is used.
Silicone thatcan withstand different temperatures as wellas both wet anddry conditions (since weather situations can vary)
should be used. If you are unsure, check the specifications of the silicone.
The following types of silicone have beenshown to yield lasting results and are recommendedby MYLAPS:
-leveling silicone kit.It is applied as aliquid and fills the slot completely.
-based silicone that retains its elasticity under a wide range of temperatures.
Testing the detection loop installation
Once the loop has been installed, it shouldbe tested toensure thatit is functioningcorrectly. We also recommend repeating
the sameprocedure at the start of each raceevent.
1. You can determine if your loop is functioning correctly by doing the following tests.
2. Connect the detectionloop to the decoder and computerrunning MYLAPS timing software.
3. Check thebackground noise, updated everyfive seconds in the MYLAPS timing software.The measured
background noise levelvalue shouldbe between 0and 40 points. Ahigher value may indicate interference byother
electrical equipment inthe area or a bad loop installation.Try switching off any suspected equipment or removing
nearby objectsand check for improvements.Especially at night,short-wave radio transmitters may cause an
increased background noise.
4. On a correctly installed detection loop, a transponder signal should be picked up at the samedistance along the
entire detection loop. Consult the Periodic testing loop document.
5. Check the signal strengths ofthe transponders as they are pickedup by the system during a testwith karts:
A good loopwill yield consistent transponder signal strengths of atleast 100 points with a hit rate of atleast
10 points.
The hit rate may varydependingon the speed of the transponder passings (slower passings yield higher hit
counts), but the signal strength shouldbe consistent (< 10points variation).

X2 Timing System Club V1.0. 2018 © MYLAPS rights reserved 20
3.4. Installation of a detection loop on a dirt track.
Positioning the detection loop
All wiring of the detection loop must be installed accordingto the drawingbelow to avoid a serious degradation in the
performanceof the system.
Pre-Installation considerations:
•The detectionloop mustbe positioned in such a way thatthe transponder is above the center of the detection loop
when the front of thevehicle crosses the finish line.
•The width of the detection loop should exceed thewidth of the trackby 60cm/2ft (30cm/1ft oneach side, see
overview above).
•The detectionloop can be used for atrack width of amaximum 12 m (66 ft).
•The detectionloop is sensitive to interference, sometimes emitted by cables. If possible,keep other cables 5 m (15 ft)
away from the detection loop.
•To avoid false inputs,make surevehicles on other parts ofthe track will notget closer than 5 m (15 ft) to thedetection
loop.