Mylaps TR2 User manual

TR2
TRANSPONDER
MYLAPS.COM
QUICK START GUIDE

2

3
TABLE OF CONTENTS
English ...................................................................................................4
Dutch .................................................................................................... 9
German ...............................................................................................14
Spanish ...............................................................................................19
French ................................................................................................24
Japanese...........................................................................................29
Chinese ..............................................................................................34

4
You need to register and activate your transponder in the Speedhive App
 ÜThe TR2 Transponder is only compatible with devices running
Bluetooth 4.0 or higher (most modern mobile phones have this)
 ÜMake sure to fully charge your TR2 Transponder before racing
 ÜTo register, follow the “Transponder Registration” steps below
ÜScan the QR Code to download
the Speedhive App
TR2 Transponder TR2 Charge Cradle TR2 Holder USB Micro Cable
WHAT’S IN THE BOX?
TRANSPONDER REGISTRATION
IMPORTANT!
IF YOU DON’T REGISTER YOUR TRANSPONDER,
YOUR TRANSPONDER WILL NOT WORK
DOWNLOAD THE SPEEDHIVE APP
1

5
REGISTER TRANSPONDER
SELECT DETECTED TRANSPONDER
LOGIN / SIGN UP IN THE SPEEDHIVE APP
SELECT TRANSPONDER TYPE
3
5
2
4
Ü Make sure to turn on Bluetooth
on your mobile device
Ü Already logged into your Speedhive
account? Then go to ‘My Profile’
to register the TR2 Transponder

6
YOUR TRANSPONDER IS REGISTERED
TRANSPONDER DETAILS
REGISTER TRANSPONDER TO ACCOUNT
CHECK YOUR SUBSCRIPTION
7
9
6
8
Ü Place the TR2 Transponder in
the powered TR2 Charge Cradle
Ü Under ‘My Products’, tap on your
Transponder for Transponder details

7
TRANSPONDER LED INDICATION
(IN THE CRADLE)
TRANSPONDER LED INDICATION
(OUT OF THE CRADLE)
LED INDICATION COLOR MEANING

BLINKING
GREEN
4 GREEN BLINKS = MINIMAL 4 DAYS RACING
3 GREEN BLINKS = MINIMAL 3 DAYS RACING
2 GREEN BLINKS = MINIMAL 2 DAYS RACING
1 GREEN BLINK = MINIMAL 1 DAY RACING
ď

ďBLINKING
RED 1 RED BLINK = LESS THAN 1 DAY RACING
ďFAST BLINKING
RED 5 BLINKS PER SEC = SUBSCRIPTION EXPIRED
 ÜIt takes 5 hours to fully charge the TR2 Transponder
MEANINGCOLORLED INDICATION
BLINKING
RED 1 BLINK PER SEC = CHARGING
ā
ā
ā
ā
ā
STEADY
GREEN BATTERY FULL (CRADLE ONLY)
STEADY
BLUE CONNECTED
NO LIGHT
NO LIGHT SLEEPING
FAST BLINKING
RED 5 BLINKS PER SEC = SUBSCRIPTION EXPIRED

8
MYLAPS Japan Office
Tokyo, Japan
§ [phone]
á [email protected]
MYLAPS Asia Office
Selangor, Malaysia
§ [phone]
á [email protected]
MYLAPS APAC Office
Sydney, Australia
§ [phone]
á [email protected]
FOR TECHNICAL
QUESTIONS, VISIT
HELP.MYLAPS.COM
MYLAPS EMEA Office
Haarlem, The Netherlands
§ [phone]
á [email protected]
MYLAPS Americas Office
Atlanta, USA
§ [phone]
á [email protected]
<120 cm
<4 ft
BIKE & MX
CAR & KART
MOUNTING THE TRANSPONDER
<60 cm
<2 ft <30 cm
<1 ft
 ÜFor the best accuracy, make sure to mount your TR2 Transponder as
vertical as possible.

9
Registreer en activeer je in de Speedhive App
 ÜDe TR2 Transponder werkt alleen met apparaten hoger dan
Bluetooth 4.0 (de meeste smartphones hebben dit)
 ÜLaad de TR2 Transponder volledig op voordat je gaat racen
 ÜVolg onderstaande stappen om de TR2 Transponder te registreren
ÜScan de QR Code om de
Speedhive App te downloaden
TR2 Transponder TR2 Oplaadstation TR2 Houder USB Micro Kabel
INHOUD
TRANSPONDER REGISTREREN
BELANGRIJK!
ALS JE DE TRANSPONDER NIET REGISTREERT,
WERKT DEZE NIET!
DOWNLOAD DE SPEEDHIVE APP
1

10
REGISTREER TRANSPONDER
SELECTEER TRANSPONDER
LOGIN / MELD JE AAN IN SPEEDHIVE APP
SELECTEER TRANSPONDER TYPE
3
5
2
4
Ü Let er op dat Bluetooth op je
apparaat is ingeschakeld
Ü Al ingelogd? Ga dan naar
‘My Profile’ om je TR2 Transponder
te registreren