1918
NOTE
- main button for 2 seconds,
- main button for seconds
- press main button allows . However, if you want to return to
the time mode, you go through all the settings first by
After pressing the the screen backlight is activated. Press the
main button for another 2 seconds and the backlight and display switch off.
Continued pressure on the a further 3 elicits a beep, and the meter
enters setting mode.
A quick of the setting changes
must repeated pressing of the main
button.
You can enter setting mode in two ways:
1. Reload meter battery
After removing the meter battery, press the main button several times until , then
follow the battery installation steps to load batteries. The meter will self test. Press the
main button to exit the self test and enter setting mode.
2. With battery inserted
the main button on the meter. Then press the main button
seconds until you hear a beep, indicating successfully entered The
display screen will show setting data.
the screen is blank
perform a
First press to switch again for a further 7
that you have setting mode.
Setting up your meter –Setting the date, time and volume Setting up your meter – Setting the date, time and volume
1. Year setting
With the year format , press the left or right button to adjust it. Then
press the main button to confirm it. shift to next digit for setting.
Repeat the above action until the year setting is completed to
month setting.
2. Month setting
With the month , press the left or right button until the current month
appears. Then press the main button to confirm it and to day
setting.
3. Day setting
With the day , press the left or right button until the current day
appears. Then press the main button to confirm it and to time
format setting.
flashing
It will then
and it will move
flashing
it will move
flashing
it will move
1)
2)
3)
