Mysaga C2 User manual

tt)sarc,a^
C2 User Manual
* *, Www.mysagamobile.com

c2...... .................'.'.'.,.. 1
t Safety & Notice .................. 3
trTENTlON:.......

1 Safety & Notice
WARNING: Prease pay attentlon to these guidelines, it's dangerous and may br6ak the law,
even the manufacturer will not undertake any responsibility to the user who does not follow with
the followlng recommendations or impropor to use the Smart Phone.
a lfthe phone supports the "Flight mode" function, please set the mode as "Flight mode" on the
plane. lf not support, please tum offthe phone before boarding, because lhe phone may
cause interference in aircraft. Please follow any restrictions on the airplane.
a Switch the device off near the fuel, chemicals, or blasting areas. Keep the device away from
ths children.
a While driving please obey local laws and regulations with regard to Smart Phone use. When
talking on the phone while driving, please obey the following rules: Concentrate on driving and
be aware of trafiic conditions; if your Smart Phone has a hands-free function, please use it in
this mode. Under poor ftiving conditiomi please stop the car before you dial or pick up the
phone.
a Switch offthe Smart Phones in the hospital orotherforbidden using Smart Phone place. The
Smart Phones will affect the normal work of electronic equipment and medical devices, such
as pacemakers, hearing aids and other medical electroRics equipment.
it Non-original accessories and components are not provided with repair warranty qualification.
a Please do not disassemble your phone by yourself, if your phone is out of order, please
contact your supplier.
a Please do not charge the Smart Phone before baftery is installed. Do not short-circuit the
battery.
a Smart Phone must be charged in the good ventilated and cooling environment, and away from
3
I
i

Y
flammable and explosive materials.
a ln order to demagnetization, please keep Smart Phone away from the magnetic material, such
as disks, credit card etc.
a Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain
minerals that will conode electronic circuits. lf your device does get wet, remove the battery,
and contact with the supplier.
a Do not use the Smart Phone in too high or too low temperature environment, and do not
expose the Smart Phone to strong sunlight or high humidity.
a Do not use liquid or wet cloth with strong detergent to clean the device.
a This Smart Phone is.provided photograph, video recording and sound recording functions;
please follow the relevant laws and regulations to use those functions. Photograph, video
recording and sound recording without authorization may violate laws and regulations.
a White using the network functions, please do not download the files which have virus, do not
install any photos and ring tones which have been damaged. lf it results the phone abnormally,
our company will not undertake any responsibility.
a Please dispose of batteries according to local regulations, please recycle when possible.
Please do not dispose as household waste.
STATEMENT: Our Company reserves tho rlght to revlss thls manual content without prior
notice-
2 Your Phone
Thank you for choosing C2 Smart phone. You can read the manual, to get a comprehensive
understanding of the use of Smart phones C2, enjoy its perfect functions and simple operation.
C2 Smart Phones are for GSM / GPRS network environment and the design of a bar phone" Android
4.2 OS, 5.0 inch capacitive touch screen. lt is a current mainstream configuration, powerful smart
phones.
This manual is used to help you the right to use the product, this product does not represent the
software and hardware configuration of any description.
ln any case, they are incorrect any data or income losses, or any special, incidental, incidental or
consequential loss responsibility, no matter what the loss by causes.
This manual content copyright laws and regulations by the protection, you may not, by any means,
copy, copy of this manual, or will this manual in any form in any cable or wireless network for
transmission, or will this manual translated into any words.
2.1 The Names and Explanation of Each Part
2.1.1 lcons
lcon Explain
,.il Signal strength
EGPRS connect

I3G card GPRS cbnnect
Ibattery
dCharging
&Vibration Mode
*Bluetooth open
WlFl connection
+Airplane mode
Missed calls
#Mobile phone speaker is muted
&Music playing
+
tUSB connected
ffi Alarm open
oEarphone connect
New message
Calling
2.2 Touch & type
Use your fingers to manlpulate icons, buttons, menus, the onscreen keyboard, and other items on the
touch screen. You can also change the screen's orientation.
To select or activate something, touch it.
To type something, such as a name, password, or search terms, just touch where you want to type. A
keyboard pops up that leb you type into the field.
Other common gestures include:
7

r Touch & hold: Touch & hold an item on the screen by touching it and not lifting your finger until an
action occurs.
rDrag:Touch&holdanitemforamomentandthen,withoutliftingyourfinger,moveyourfingeron
the lcreen until you reach the target position' For example, you can drag to reposition shortcuts
on the Home screen.
IswiPeorslide:ouicklymoveyourfingeracrossthesurfaceofthescreen,withoutpausingwhen
you hrst toucn (so you -don't drag something instead)' For example' you can slide a Home screen
left or right to view the other Home screens'
I Doubb:tap: Tap quickly twice on a webpage, map, or other screen to zoom. For example,
double-tap a webpage in Browser to zoom in, and double-tap again to zoom out'
r Pinch: ln some apps (such as Maps, Browser' and Gallery), you can zoom in and out by placing
two fingers on the screen at once and pinching them together (to zoom out) or spreading them
apart (to zoom in).
r Rotate the screen: On most screens, the orientation of the screen rotates with youi'device as
you turn it. You can change this Display setting ,,' .
2.3 Battery
2.3.1 Remove and install of the Battery.
I When removing the battery follow the following steps:
O Push the battery covertowards bottom;
@ Raise the battery bottom, break out the battery from the Smart-phone'
r When installing the battery follow the following steps:
o Make the battery metal contact completely contiact with the battery compartment metal
contact, and then push the battery to inset the phone'
@ Put the battery cover on.
Warnin!: remove battery previous must turn off your cell phone. lt is forbiddon to boot or have
other external power of connect'ton directly tafe Lut the blttery, or possible damage to the SIM
card and a mobile Phone.
2.3.2 Battery charging
r plug the charglr connector with the phone, and plug the charger into the electrical outlet.
r At this time the charge level icon will repeatedly flash at the top right corner of the_ mobile phone's
screen; lf the mobil6 phone charging while power off, a charging indication will appear on the
""r"en. lf th" mobile phone was u-sed even after there was insufficienl po{rer, it might take some
time after having begun charging until indication of Gharging appears on the screen'
when the battery level icon does not flash anymore, this means that the battery is fully charged lf
charoino while oower off, there will still be an indication on the screen when the charging is complete.
ili;-;;;";r; ";r"iry t"x"" .or" than 2.5 hours(The tirst three times you rechq::qet voy-a.u_ettelt<ee0
ii-ii nour", as this will help extend battery life).The mobile phone and charger will become warm during
charging and this is ilormal.
i - frn"n charging is complete, unplug the charge connector from the electrical outlet and the mobile
phone.
ATTENTION:
rChargingmustbeperformedinawelFventilatedareawithatemperaturebetween-10"cand
++S"C. fne factory-supplied charger must be used. Using an unapproved charger could be
dangerous in addition to being in breach of the provisions of the repair warranty'
r lf th; mobile phone automaiically shuts down, or indicates that "Battery is low" you should
irr"Oirt"ly "fi"rge the battery. lfihe battery has not been entirely used up before charging, the
9
,l
I

mobile phone will automatically decrease the recharging period.
2.4 Connect network
2.4.1 SIM card
Before using your phone, you muat first insert a valid SIM (Subscribor ldentity Module)
card in tho phone. The SIM card provided by the network provider.
All set up and network connection ofthe related information were recorded on a SIM card in the
chip, and they recorded in on the card and your SIM card in the telephone book store name, telephone
number and short messages.
SIM card can from your phone out, put any a mobile phone in use (novice the opportunity to
automatically read the SIM card).
ln order to prevent loss and damage information in the SIM card, touch the metal contact surfaces
should be avoided, and the SIM card is placed away from electric, magnetic place. Once the SIM card is
damaged, you will not normally use the phone.
Warning: take out the SIM card previous must turn off your cell Phone. lt is forbidden to have
external power supply connected cases insert or take out the SIM card, or possible damage to the
SIM card and a mobile phone.
2.4.2 lnsertion of the SIM Card
Metal interface of SIM card is very easy scraped.Before inserting into the phone you must
carefully remove it.
I Turn off the phone; remove the battery and unplug other e)dernal power sources.
I lnsert the SIM card into the SIM slot.
r When you need to remove the SIM card, please first turn off the phone, remove the battery then
remove the SIM card. 10
2.4.3 lnsertion of the Memory Card
r Tum of th€ phone; remove th6 battery and unplug other external power sources'
r lnserttheT-FLASH card to theT-FLASH trough.
r when you ne6d to remove it, please first turn off the phone, remove the battery then remove the
momory card.
2,4.4 Turning the Phone On and Off
To turn on or off the phone pl6ase hold down the Power key.
lf vou turn on the phone without having inserted the SIM card, phone will display "NO SIM CARD"' After
inierting the SIM iard, the phone will automatically chsck if the SIM is useable'
3 Function Menu
3.1 Make calls
wh6n the network provider icon appears on the standby screen, you can call out or answer calls'
The indicator on the upper right part shall show the signal strength'
Quality of connection will be greatly influenced by obstructions So movement
may effsctively improve the quality of conneclion.
3.2 Emergency calls
You cancall for emergency service as long as you ar6 in the network coverag€.(ch6ck.the.signal
strengih indication bar on lhe ujrper right side of the handset screen)' lf v9ur,n:lw9l!?!oYlq-"].9::-"1't
pibritJ .i.i"g .ervice in this iiea, t[ere will be 'Emergency Calls " on the lock screen. lf you are in the
network covera-ge, you can have emergency calls even without a SIM card'
in a small range
1l

3,3 Answer calls
Drag the icon to answer to answor an incoming call. lf your headphone is conn€cted to the handset,
you can use the headphone key on the headphone answer calls.
Attention: A short press oi the headphone key will answer the call whilo a long one will refused
to answ6r the phone.
While the sireen is locked, you can rospond to incoming calls in three ways. Touch the white phone
icon and slido over one of these icons:
LAnswer call Start talking to the caller.
nSend to voicemail Direct the caller to leave a voicemail
message.
Br Send a message Opens a list of default text messages.
Touch one to send it to tho caller
immedietolv.
3.6 USB
you can use a USB cable to connoct your phone to a Windows computer and transfer music, pictures,
and other file6 in both directions. This connection uses the MTP protocol, which is supported by most
recent versions of Windows.
lf you are using USB tethering, you must turn that off before you cen use USB to transfer files between
your tablet and computer.
When you connect your phone to the USB port on your computer, its USB storage is mounted as a drive
and app6ars on your computer screen. You can now copy files back and forth as you would using any
other extemal device.
When you're finishad, simply disconnect the phone by unplugging the USB cable.
3.7 Wi-Fl
Wi-Fi is a wireless networking tochnology that can provide lnternet access at distances of up to 100
meters, depending on the Wi-Fi router and your surroundings.
To use Wi-Fi, you connect to a wireless access point, or "hotspot." Some hotspots are open and you can
simply connect to them. Others imploment security features that require other steps to set up, such as
digital certificates or other ways to ensure that only authorized users can connect.
Td extend the life of your battery between charges, turn ofr Wi-Fi wheh you'IB not using it' You can also
set your device to disconnect automatically from Wi-Fi networks when its sleeping.
3.8 Bluetooth
Bluetooth is a short-range wirelgss communications technology used to communicate between
devices over a distanco of about 10 meters. The most common Bluetooth devices are hoadsets for
making calls or listening to music, hands-free kits for cars, and other portablo devices, including laptops.
3.4 Call log
This hindset not only can list all calls in reverse chronological order, but also llst a floating menu
with all, answered, dialed, missed calls for checking call history of differont kinds'
3,5 Phone
You can use the phonebook function to save contact information. You can view or management
your contacts.
72

4 Troubleshooting When you cannot get a signal, the
phone will continue to transmit in order
to find a base station, thereby
expending large amounts of electricity
will cause the standby time to
decrease.
Please move to an area with a
strong signal or temporarily turn off
your Smart Phone.
Unable to turn on
the phone The battery is empty. Look at the remaining electricity or
recharge.
SIM card
malfunction SIM card is damaged Contact your network service
provider.
SIM card is not properly inserted. Conflrm SIM card is properly
inseited.
There is a dirty substance on the
melal surfam of lhe SIM ear.i Use a clean cloth to wip6 off the
metal contact Doint of the SIM mrd
Unable to connect
with the network Expired SIM card Contact Vour network provider,
Outside the GSM service area Consult your network provider on
the seruice area
Poor signal. Please move to a place with a better
sional an.l tru adain
Unable to make a
call Usinq the call bar function Cancel the call bar function.
Usino the fixed dial function. uancel the tixed call settino.
unusual occurs while usinq vour Smart Phone, please refer to the followhg table.
Frequen$y
Occurring
Problemc
Causo How to Flx
Poor reception Using the Smart Phone in an area with
poor receplion such as near tall
buildings or in a basement where
radio waves cannot be transmitted.
Try to avoid.
using the smart Phone when
the network is busy, such as during
rush hour, when the lines are full
6^Lih^ it im^^ceihla t^ dat thhrdh
Try to avoid.
Related to the distance from the base
station built by the notwork. You can request that tho network
service p.rovider provide a service
area nlan
ECnO Or notse Caused by poor network rolay, a
raaianal nrnhlam Hang up and rsdlal, if the relay is
changgd thon the lin€ may be bottor.
Some mllino reoions have Door lines.
Shortening of the
standby time Standby time is related to the network
system. Please temPorarlly turn ofr your
Smart Phone, as you are located in
an area with ooor recoDtlon.
Batteries n6ed to be replaced ReDlaco tho batterlss

66n-tact
your network Provider'
enter the wrong
password three times.
or charger is
Unable to charge ihehe charq i nq environment.
in the environment of less if tne Ptug is Properly
Oetete a Portion of the Phone
number enties
storage space of the
Unable to add
new phone book
entries vour n6wo* ProvlOer does not
support this function or you have nol
applied for it.
certain functions