Mysaga C3 User manual

v/slia,a
C3 User Manual
nffiCS
www.mysagamobile.com ii.:

I Safety&Notlce
c3 ............................... I
3
2 YourPhone...
3 Rrn&.l}ilr

4 Troubleshooting..
1 SafetY & N-otice' :: ' t' ' \ ''1"
WARNING: Please pay attention to these guidelines; it's dangerous and maybreak th6'law,
even tho manufacturer will not undertake any responsibility to the user who dciei nbt follow with
the followlng recommendatlons or improper to use the Sriart Phone. ' '
a lfthe phone supports the "Flight mode" function, please set the mode as "Flighi mode" on the
plane. lf not support, please turn off the phone before boarding, because the phone inay cause
interrerence in aircraft. Please follow any restrictlons'on the dirplah6l'r -. .'. ' ' ' ' l
Switch the device off near the fuel, chemicals, or btas.tilS3ieagrlieep the dwice away from the
children.
Whil6 driving please obey local laws and regulations wlth regarO qo Sri\art Phbne use. When
talking on the phone while driving, please obey the following rulqs: concijntiate on driving and
be aware of trafiic conditions; if your Smart Phone has a hands-free fuhction, please use it in
this mode. Under poor driving conditions, please stop the'bai'bdfuie you'diat dr piCk up thd
phone.
Switch off the Smart Phones in the hospital or otn6r fbrbiriOeh iisihg Smdrt Phorie place. The
Smart Phones will affect the normal work of electroriic equiprtri-intahd,medicdl de'iii#s, suth as
pacomakers, hearing aids and other medical electroni&'equiiJrdaihtir:'ii:i i :'r : i.r': l
Non-orlglnal accogsories and components are not provided with repair warra,nty qualific€tion.
Pleaso do not dlsaesemble your phone by yourseH, if i,otjl ph6l1eib out"ofordei'i,lease ibntact
your supplier.
Please do not chargo the Smart Phone before battery is installed. Do not short-circuit the
battery
Smart Phone must be charged in the good ventilated and cooling environment, and away from
3
tr
I
I
I
I
{
1
t
t
E,
I
j
a
a
a
a
a
a
,f{

flammable and explosive materials.
. a ln order to demagnetization, please keep Smart Phone away from the magngtic material, such
as disks, credit card etc.
a Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain
minerals that will corrode electronic circuits. lf your device does get wet, remove the battery,
and contact with the supplier.
a Do not use the Smart Phone in too high or too low temperaturo snvironment, and do not expose
the Smart Phone to strong sunlight or high humidity.
a Do not use liquid or wet cloth with strong detergent to clean the device.
a This Smart Phone is provided photograph, video recording and sound recording functions;
please follow the relevant laws and regulations to use those functions. Photograph, video
recording and sound recording without authorization may violate laws and regulations.
a While using the network functions, please do not download the files which have virus, do not
install any photos and ring tones which have been damag6d. lf it results the phone abnormally,
our company will not undertake any responsibility.
a Please dispose of batteries according to local regulations, please recycle when possible.
Please do not dispose as household waste.
STATEMENT: our company reserves the right to reviae this manual content wlthout prior
notice.
2 Your Phone
Thank you for choosing C3 Smart phone. You can read the manual, to get a comprehensive
understanding ofthe use ofSmart phones C3 enjoy its perfectfunctions and simple operation.
C3 Smart Phones are for GSM / GPRS network environment and the design of a bar phone. Android
4.2 OS, 4.5 inch capacitive touch screen. lt is a current mainstream configuration, powerful smart
phones.
This manual is used to help you the right to use the product, this product does not represent the
soffware and hardware configuration of any description.
ln any case, they are incorrect any data or income losses, or any special, incidental, incidental or
consequontial loss responsibility, no matter what the loss by causes.
This manual content copyright laws and regulations by the protection, you.may not, by any means, .
copy, copy of this manual, or will this manual in any form in any cable or wireless network for
transmission, or will this manual translated into any words.
2.1 The Names and Explanation of Each Part
2.1.1 lcons
lcon Explain
,ll Signal strength
EGPRS connect

I,. 3G card GPRS cofinect
t' 'I:-r;.rr,i,
betterY .
dt,-,
&. Vibretiqn lilode
,'*. 'iBluetoorth open
WlFl connection
+Airplane rhode
fi Missed calls
#Mobile phone speaker is muted
:i: &Music playing
d,
lUSB connected
ffi Alarm open
oEarphone connect
New message
Calling
1.f I r I
" 2.2 Touch & type
, Use your fingers to manipulate icons, buttons, menus, the onscreen keyboard, and other items on the
touch screen. You can also change the screen's orientation.
To select or activate something, touch it.
To type something, such as a name, password, or search terms, just touch where you want to type. A
keyboard pops up that leb you typ6 into the field.
Other common gestures include:

I Touch & hold: Touch & hold an item on the screen by touching it and not lifting your finger until an
action occurs.
t:, Diag: Touch & hold an item for d moment and then, without lifting your finger, move your finger on
the icreen until you reach the target position. For example, you can drag to reposition shortcuts
on the Home screen.
I swipe or slide: Quickly move your finger across the surface of the screen, without pausing when
you flrst touch (so you dont drag something instead)" For example, you can slide a Home screen
' leftor rightto viewthe other Home screens.
I .Doubb:tap: Tap quickly twice on a webpage, map, or other screen to zoom. For example,
double-tap a webpage in Browser to zoom in, and double-tap again to zoom out'
r Plnch: ln some apps (such as Maps, Browser, and Gallery), you can zoom in and out by placing
two fingel.S on the screen at once and pinching them together (to zoom out) or spreading tham
apart (to zoom in).
I Rotate the screen: On most screens, the orientation of the screen rotates with your device as
you turn it. You can change this Display setting.
2.3 Battery
2.3.1 Remove and install of the Battery.
r When removing the battery follow the following steps:
O Push the battery covertowards bottom;
@ Raise the baftery bottom, break out the baftery from the Smart-phone'
r Whiln installing the battery follow the following steps:
O Make the battery metal contact completely contact with the battery comparlment metal
contact, and then push the battery to inset the phone.
@ Putthe battery cover on'
warning: remove battery previous must turn off your cell phone. lt is forbidden to boot or havo
other eiternal power of connection directly take out the battery, or possible damage to the sllll
card and a mobile phone.
2.3.2 Battery charging
r Plug the charger connector with the phone, and plug the charger into the electrical outlet.
r At this time the charge level icon will repeatedly flash at the top right corner of the mobile phone's
screen; lf the mobile phone charging while power off, a charging indication will appear on the
screen. lf the mobile phone was used even after there was insufficient power, it might take some
time after having begun charging until indication of charging appears on the screen-
when the battery level icon does not flash anymore, this means that the battery is fully charged. lf
charging while p6wer off, there will still be an indication on the screen when the charging is complete.
fnis-process usually takes more than 2.5 hours(The first three times you recharge, you'd better.keep
i2-1d hours, as this will help extend battery life).The mobile phone and charger will become warm during
charging and this is normal.
r When charging is complote, unplug the charge connector from the electrical outlet and the mobile
phone.
ATTENTION:
r Charging must be performed in a well-vsntilated area with a lemperature between -10"C and
+45"4. The factory-supplied charger must be used. Using an unapproved charger could be
dangerous in addition to being in breach of the provisions of the repair warranty.
r lf the mobile phone automatically shuts down, or indicates that "Battery is_low'.you.should
immediately cliarge the battery. lf the battery has not been entirely used up before charging, the
il
1/
:!

mobile phone will automatically decrease the recharging period.
2.4 Gonnect network
2.4.1 SIM card
Before using your phone, you must first insert a valid SIM (Subscriber ldentity Module) card
ln the phone. The SIM card provided by the network providor.
All set up and network connection ofthe related information were recorded on a SIM card in the chip,
and they recorded in on the card and your SIM card in the telephone book store name, telephone number
and short messages.
SIM card can from your phone out, put any a mobile phone in use (novice the opportunity to
automatically read the SIM card).
ln order to prevent loss and damage information in the SIM card, touch the metal contact surfaces
should be avoided, and the SIM card is placed away from electric, magnetic place. Once the SIM card is
damaged, you will not normally use the phone.
Warning: take out the SIM card previous must turn off your cell phone. lt is forbidden to have
extornal power supply connected cases insert or take out the SIM card, or possible damage to the
SIM card and a moblle phone.
2.4.2 lnsertion of the SIM Card
Metal interface of SIM card is very easy scraped.Before inserting into the phone you must carefully
remove it.
I Turn off the phone; remove lhe battery and unplug other external power sources.
r lnsert the SIM card into the SIM slot.
r When you need to remove the SIM card, please first turn off the phone, remove the battery, then
remove the SIM card. 10
2.4.3 lnsertion of the Memory Card
r Turn off the phone; remove the battery and unplug other external power sources.
r lnsert the T-FLASH card to the T-FLASH trough.
r when y6u need to remove it, ploase {irst turn off the phone, remove the battery then remove the
memory card.
2.4,4 Turning the Phone On and Off
To turn on or off the phone please hold down the Power key.
lf you turn on the phone without having insorted the SIM card, phone will display "NO SIM CARD". After
inaerting the SIM card, the phone will automatically check if the SIM is useable.
3 Function Menu
3.1 Make calls
When the network provider icon appears on the standby screen, you can call out or answer calls.
The indicator on the uppor right part shall show the signal strength.
euality of connection will be groatly influencod by obstructions, So movement in a small range may
effectively improve the quality of connoctlon.
3.2 Emergency calls
You can call for emergency servic€ as long as you are ln the network coverage (check the signal
strength indication bar on the upper right sid€ of tho handset scroen), lf your.network provldor doesn't
provlJe roaming service in this area, there will be "Emorgency Calls " on the lock screen. lf you are in the
network coverage, you can havo emergency calls even without a SIM card.
11

3,3 Answer calls
Drag the icon to answer to answer an incoming call. lf your headphono is connected to the handset,
you can use th6 headphone key on the headphone answer calls.
'Attentlon: A short press of the headphone key will answer the call while a long one will refused
to answer the phone.
While the screen is locked, you can respond to incoming calls in three ways. Touch the white phone
icon and slide over one of th6se icons:
LAnswor csll Start talking to the caller.
nSend to \oic6mail Direct the caller to leave a voicemail messag6.
FSend a message Opens a list of default text messages. Touch one to
send it to lhe cal16r immediately,
3.4 Call log
This handset not only can list all calls in rsverse chronological order, but also list a floating menu with
all, answered, dial6d, missed calls for checking call histgry of different kinds.
3.5 Phone
You can use the phonebook function to save contact information. You can view or management your
contacts.
3.6 USB
You can use a USB cable to connect your phons to a Windows computer and transfer.music,
pictures, and other files in both dir€ctions. This connection uses the MTP protoool, which i$ svppqfted by
most recent versions of Windows.
lf you are using USB tethering, you must turn that off before you can use USB to transfer files between
your tablet and computer.
When you connect your phone to the USB port on your computer, its USB storage is mounted as a drive
and appears on your computer screen. You can now copy files back and forth as you would using any
other external device.
When you're linished, simply disconnect the phone by unplugging th6 USB cable.
3.7 Wi.Fi
Wi-Fi is a wireloss networking tochnology that can provido lntemet accgss at distances of up to 100
meters, depending on th€ Wi-Fi router and your surroundings.
To use Wi-Fi, you connect to a wireless access point, or'hotspot." Some hotspots are open and you can
simply connect to them. Others implement security features that require other steps to set up, such as
digital certificates or other ways to ensure that only authorized users can connect.
To extond tho life of your battery betwoen oharges; turn off WFF| when you'r€ not using it. You can also
set your devic€ to disconnect automatlcally from Wl-Fl networks when lfs sleoping,
3.8 Bluetooth
Bluetooth is a short-rangd wireless communications technology u8ed to communlcate betweon
devices over a distanc€ of about 1 0 m€ters. The most common Blu€tooth d€vlces are headsots for
making calls or llstening to music, hands-free kits for cars, and other portablo devlces, including laptops.
13
12

4 Troubleshooting When you cannot get a signal, the
phone will continue to transmit in order
to find a base station, thereby
expending large amounts of electricity
will cause the standbv time to decrease.
Please move to an area with a
strong signal or temporarily tum
off your Smart Phone.
Unable to turn on
the Dhone The battery is empty. Look at the remaining electricity
SIM card
malfunction SIM card is damaged. Contact your netwofi service
SIM card is not properly inserted. Confirm SIM card is properly
inserted
There is a dirty substance on the metal
surface of the SIM card. Use a clean cloth to wipe off the
metal contact point of the SIM
Unable to connect
with the network Exphed SIM card Contact your network provider.
Outside the GSM seruice area Consult your network provider on
the serui@ area-
Poor signal. Please move to a place with a
bett€r sional and tru aoain-
Unable to make a
call Using the call bar function Cancel the call bar function
Usino the fixed dial function. Cancel lhe fixed mll setlind.
lncorrect PIN
number Consecutively enter the wrong
password three times. Contacl your network provider.
15
unusual occurs while usino vour Smart Phone. Dleaoe rofer to the lollowino table
Frequen$y
Occurring Caua€ How to Fix
Poor reception Using the Smart Phone in an aroa with
poor reception such as near tall
buildings or in a basement wher€ radlo
wavas cannot be transmitted.
Try to avoid.
Using the Smart Phone when the
network is busy, such as during rush
hour, when the linqs are full making it
im^^.cihla l^ ^at thr r '^h
Try to avoid.
Related to the distanco from the base
station built by the network. You can request that the network
service providor provide a service
Echo or noise Caused by poor network .relay, a
E^i^h.l nhhl.m Hang up and redial,.if the relay is
changod then the line may be
better.Some callind redions hav€ noor lines
Shortening of th6
standby time Standby time is related to the network
syst6m. Please temporarily turn off your
Smart Phone, as you are located
ih .h ara. wifh nnnr rananfinn
Batteries nesd to be reDlaced Fl.nlam the batleries
-

Unable to charge The Battery or charger is or
R€Cnarging In the environment of less
than -1Ooc or hiohar lhrn 550^ Change th€ charging
envlmnmenl
Poor contact Ch€ck if the plug is proporly
mnnecled
Unable to add new
phone book entries The storagg space of the phone book is
tu[ Delete a portion of the phone
number entries
unable to set
certain functions You. network providor does not support
this function or you hav6 not applied for
it.
uontact your neb{rorl( prcvider,