Myson MPRT RF User manual

MPRT RF
WIRELESS PROGRAMMABLE
THERMOSTAT
ABOUT YOUR MPRT RF
The
MPRT RF
consists of a room unit and a relay box.
The ROOM UNIT is programmable a room thermostat.
It measures the temperature of your room and then controls the
heating to maintain the room at the chosen temperature.
IMPORTANT : Do not place or fi t the ROOM UNIT where it will be
affected by heat from radiators, sunshine,
or other heat source.
The relay box is wired to your heating equipment by your
electrician. The room unit communicates with the relay box by
radio waves, thus switching on/off your heating.
If your MPRT RF has already been installed you need only follow
the section
‘THREE EASY STEPS’
, to operate your heating.
“T
HREE EASY STEPS”
On your room unit you set the value of three temperatures, Low,
Medium and High.
“Low” is typically a night setting, “Medium” an afternoon setting,
and “High” a morning and evening setting.
Your room unit will then operate your heating to maintain these
temperature settings.
Follow steps 1 to 3 below.
ROOM
UNIT
RELAY
BOX
1
Hold down
for 5 seconds.
This screen
appears
:
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
SETTING THE CLOCK
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
Use and to alter the blinking text (hours).
Press to
proceed to minutes and change using
and .
Press to proceed to day and change using and .
Press .
The time is now set and the screen returns to normal.
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
33
Press
.
This screen
appears:
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
SETTING
YOUR
HEATING TI
MES
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
NOTE:
If the screen above appears without the days of the week displayed it
means the room unit has been set up to give the same temperatures ever
y
means the room unit has been set up to give the same temperatures every means the room unit has been set up to give the same temperatures ever
day.
If you wish to change this set up to enter for individual days press
to exit. Then press and together and hold down for 10 seconds.
Press to enable daily time settings. Press to accept.
Now press and follow the instruction below.
(To revert to the same programme each day repeat the above process.)
Now press and follow the instruction below.
(To revert to the same programme each day repeat the above process.)
Now press and follow the instruction below.
When the daily programme is enabled, t
he bar graph shows the
temperatures for the 24 hours of Monday.
A Low temperature is
indicated by , a Mid temperature by , and a High temperature
by . If you are happy with the temperatures entered for Monday,
press .
Tuesday’s temperatures appear.
If you are happy with these temperatures press again, and so
on to Sunday.
Press . The screen returns to normal.
If you are not happy with the temperatures on any particular day,
you can change them. For example, in the fi gure below, to change
the settings on the left (LLLLLLMHHLL) to those on the right you
would press the button sequence LLLLLMMHHHH
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
USER INSTRUCTIONS
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
2
2
Press
.
This screen
appears:
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
SETTING
YOUR
3
TEMPERATURES
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
Use or to set the “High” temperature.
Your have now set your high temperature.
Press .
T
he screen returns to normal.
To set your “Medium” temperature, follow the same procedure as
above except press instead of .
To set your “Low” temperature, follow the same
procedure as
above except press instead of .
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
SMA
RT START
“SMART START” varies the start-up times to ensure that the build-
ing achieves temperature by the required time.
The smart start system is continually learning the temperature rise
requirement, delaying the start up of the system, therefore saving
energy during milder weather.
SET
UP
FOR SMART-START.
UP FOR SMART-START.UP
To toggle the Smart-Start function between enabled and disabled,
hold and down for 10 seconds.
The button can now be used to toggle Smart-Start between
active and deactivated.
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr

MANUAL OVERRIDE.
If you hold for 5 seconds, the room unit will go into manual
mode. In this mode
there is only one temperature.
Press either or to see this tem
perature change.
Set it to the temperature you
require. The thermostat will continue
to control your heating at this temperature until you deactivate
manual override by pressing .
DEACTIVATING YOUR HEATING:
If you press your heating will be deactivated. The screen will
continue to indicate the room temperature but the heating will
never come on.
To reactivate your heating simply press .
Note:
Provided you deactivate via the MPRT RF, the system will have
frost protection at 6°C. If the system is to be left shut down for a
long period over winter, ensure there is suffi cient battery life to
maintain protection.
.
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
MORE ADVANCED
FUNCTIONS
KEYPAD LOCKING.
H
old
& for 5 seconds to lock the keypad.
The locked symbol appears on the screen .
No changes can be made to the settings.
To unlock the screen hold & for 5 seconds.
RETURN TO FACTORY SETTINGS
.
Holding and down for 10 seconds returns the H, M and L
temperatures to the values they had when they left the factory.
It also returns the heating times to their factory values.
COPY FUNCTION.
Pressing and for 5 seconds when setting your heating
times (step 3), will copy the current day’s times into the next day.
HOLIDAY FUNCTION.
Pressing while holding puts the room unit into holiday
mode. Press to enter the number of days you will be away on
holidays. Press . Now press or to alter the room tem-
perature you require while away on holidays. Press to accept
and exit. The function can be cancelled by pressing .
SMART-START FUNCTION.
The message “SMART START” displayed on the screen indicates
t
hat this function is operating.
Smart-Start works by switching the heat on in advance - so
that
the room can warm up. As an example, lets say you get out of bed
at 8am and you want the room to be warm at that time.
Without
Smart-Start you must programme your High temperature
for 7am.
With
Smart-Start you need only programme your High temperature
for 8am.
Smart-Start
will know that you want the room warm at 8am and
bring the heating on before that.
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
RELAY BOX
OPERATION
RELAY BOX OPERATIONRELAY BOX
Once your Relay Box has been installed,
it becomes part of your heating equipment.
It operates automatically.
RELAY BOX
MYSON CONTROLS
MYSON LTD., EASTERN AVENUE,
TEAM VALLEY, GATESHEAD,
TYNE & WEAR,
NE11 0PG
SALES OFFICE No. 0845 402 3434
IN ACCORDANCE WITH OUR POLICY OF
CONTINUAL PRODUCT IMPROVEMENT WE
RESERVE THE RIGHT TO AMEND THE SPECIFICATION OF THESE PRODUCTS WITHOUT
PRIOR NOTIFICATION.
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
REPLACING THE BATTERIES IN YOUR
ROOM UNIT.
Dependant on type and manufacturer the batteries in your MPRT RF
should last approximately 2 years.
When they go low, a battery symbol appears on the LCD screen
telling you to replace the
batteries
.
To access the batteries release the cover from the base by pressing
the base at arrow shown above.
The batteries are then visible.
NOTE:
Changing the battery in 1 minute or less will retain all your
settings. If it takes longer than 1 minute, you may have to re-enter
your settings.
OK
H
M
L
HEAT
TIMES
PRESS TO ALTER YOUR HEATING TIMES
PRESS TO DEACTIVATE HEATING, OR HOLD
FOR 5 SECONDS FOR MANUAL OVERRIDE
PRESS FOR 1 HOUR OF HIGH TEMPERATURE
PRESS TO ALTER YOUR “HIGH” TEMPERATURE
PRESS BOTH TOGETHER TO SET/VIEW CLOCK
PRESS TO ALTER YOUR “MID” TEMPERATURE
PRESS TO ALTER YOUR “LOW” TEMPERATURE
OFF
MAN
1 Hr
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
+
PRESS HERE
The unit takes three
LR6 AA1.5V
alkaline batteries.
ONE HOUR OF HIGH TEMPERATURE.
I
f yo
u press you will get an hour of High heat, irrespective or
whether your times are set for Low or Mid heat.
If you want to cancel this function you simply press .
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr
MON TUE WED
THU FRI SAT SUN
High Setting Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SUN
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
But
Smart-Start is even more intelligent than this
. It rem
embers
how cold it was on the previous mornings. Thus, in Winter it might
start the heating
1 hour before 7a.m. and in Spring start half an
hour before 7a.m. In this way it provides optimum comfort and
energy saving.
Note:
In extreme low temperatures and dependant on your heating
system capability, the desired temperature set may not be
reached by the set time. Thus an earlier higher temperature may
need to be set.
OTHER SIMPLE FUNCTIONS
OK
H
M
L
HEAT
TIMES
OFF
MAN
1 Hr