MYSTIQUE
TWO PEOPLE AND PHILP'S SCREW DRIVE RREQUIRED
ASSEMBLY INSTRUCTIONS
UNPACK ALL PARTS AND CHECK THEM AGAINST PARTS LIST ON THIS INSTRUCTION SHEET BEFORE DISCARDING PACKING AND CARTONING!!
1) Connect the side rail and headboard/footboard by bolt (F).
2) Assemble the side rail and headboard/footboard using the curved washer (A),
flat washer (B), lock washer (C), and nut (D) tighten by wrench (E), as shown in Diagram A.
3) Assemble the support leg on the slat, as shown in Diagram B.
4) Mount the assembled support slats (done in step 3) onto the cleat of side rails with screws (G).
Use a Phillips Head Screwdriver to tighten screws, as shown in Diagram C.
6-6 BED
1
2
1
1
QTY
4
Slat (4)
Part Description
Headboard (1)
Footboard (2)
Side rail (3)
RTA Hardware(7)
Part No.
Created on:2015-2-4
1 of 2
B033-350H/350F/300R
1
8
8
8
Wrench
Nut
Bolt
Lock Washer
8
Flat Washer(5/16"Dia)
8Curved Washer(5/16"Dia)
NO. Hardware List
A
B
C
D
E
Q'ty
RTA Hardware(7)
F
16
G
RTA Hardware(6)
Hardware ListNO.
Screw(4.2x32)
RTA Hardware(6) 1
Support leg(5) 8
B033-350H
6-0 BED
1
2
1
1
QTY
4
Part No.
B033-350H/350F/400R
1
8
B033-350F
B033-300R
B033-350F-3067
B033-350F-30305
B033-350F-3001
B033-300R-3001
B033-350H
B033-350H-350F-300R-400R
B033-400R
B033-350F-3067
B033-350F-30305
B033-350F-3001
B033-400R-3001
B033-350F
