MyTrendyPhone 236229 User manual

User Manual for Adjustable 3D LED
Light Digital Electric Clock

Specification
- Material: Acrylonitrile butadiene styrene
- Dimensions: 21,5cm x 8,5cm x 3,8cm
- Charging cable length: 1,8m
Buttons introduction
Set button: under time mode, press this button to set time, date, temperature,
alarm1/2/3, and then long-press the set button to confirm.
Up button: short-press this button to enter the Adjust mode. Long-press for
fast adjustment. Under alarm mode, short-press to open/close the alarm function.
Down button: under settings mode short-press this button to enter adjustment
mode. Long-press for fast adjustment.
Display modes
To select the display mode you want press the Up button and you can choose
one of the three modes:
DP-1 mode: LED display time, date, and temperature changes after one
another. After 10 seconds it will go back to the time mode.
DP-2 mode: by default displays time, but you can change it and it will constantly
display the mode you choose.
DP-3 mode: by default displays time and if you change to another mode and there is
no activity for 15 seconds it will go back to the time mode.
Functions
The clock function: the default format is 12-hour, but you can change it to
24-hour format if you go to settings, and press the Up button.
The time display mode: long-press the Set button for 2 seconds to enter the
clock settings. Press the Up/Down buttons to adjust the time. For faster adjusting,
long-press the Up or Down buttons. The settings order is time format (12/24) - hours
- minutes - save and exit.
The date mode: the date shows month/date by default. To check the year, you
have to enter the date settings. While in the date settings, you can adjust the date by
long-pressing the Set button. Use the Up and Down buttons to set the date, and for
faster setting long-press the Up or Down buttons. The year can be chosen between
2000 and 2099.
Alarm function: there is a total of 3 alarms that can be set. Go to the alarm mode,
press the Up button to turn the alarm on or off, and long-press the Set button to enter the
alarm settings. Settings order is hours - minutes - save and exit. When the alarm goes off,
press any button to stop it. If you don’t press anything it will ring for 1 minute.
Automatic brightness adjusting: the brightness is automatically adjusted based on the
time of the day. It goes from 70% between 7 PM and 6 AM to 100% between 6 AM to 7 PM.