N BROWN Cabana EQ545 User manual

1 Hour
No. People Assembly Time
Assembly Instructions - Please keep for future reference Cat No. EQ545
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000
Cabana 6 Seat Set

Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools
listed on the next pages.
• Remove all ttings from the
plastic bags and seperate
them into their groups.
• Keep children and animals
away from the work area,
small parts could choke if
swallowed.
• Make sure you have
enough space to lay out
the parts before starting.
• Do not stand or put weight
on the product, this could
cause damage.
• Assemble the item as close
to its nal position (in the
same room) as possible.
• Assemble on a soft, level
surface to avoid damaging
the unit or your oor.
• We do not recommend the
use of power
drills/drivers
for inserting
screws as this
could damage
the unit. Only use hand
screwdrivers.
Care and Maintenance
• Please clean using cloth
with glass cleaner, do not
use bleach or abrasive
cleaners.
• From time to time check
that there are no loose
screws on this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
If you need help or have damaged or missing parts, call the JDW
customer helpline: 0871 231 2000
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

Exploded View - Table

Exploded View - Stool

Components - Table
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
A Top Panel 1
B Side Panel 2
C Top Panel Insert 1
D Washer 12
E Screw 12
F Allan Key 1
G Screw Cap 12

Components - Fixings
Please check that you have all the components listed below before constructing your item.
Tools Required
Ruler - Use this to measure your screws (mm)
Part No Description Qty
A Top Panel 1
B Side Panel 2
C Foot Rest 1
D Washer 12
E Screw 4
F Allan Key 1
G Screw Cap 12
H Small Screw 8

Assembly Instructions - Table
Step 1
• Lay part A upside
down and line up
one of part B as
shown.
• Line up part E
and part D and
place into the
hole.
• Tighten and
secure with part
F.
• Cover the screw
top with part G.
• Repeat with the
other part B.
Step 2
• Turn unit so part
A is now on the
top.
• Place part C on
top of part A.
G
F
E
D

Completed Unit - Table

Assembly Instructions - Stool
G
F
E
D
Step 1
• Lay part A upside
down and line up
one of part B as
shown.
• Line up part E
and part D and
place into the
hole.
• Tighten and
secure with part
F.
• Cover the screw
top with part G.
• Repeat with the
other part B.
D
H
F
G
C
Step 2
• Turn the unit top
side up and place
part C between
the legs
• Line up part H
and part D and
place into the
hole.
• Tighten and
secure with part
F.
• Cover the screw
top with part G.
• Repeat with the
other part B.

Completed Unit - Stool