Nabis Lamone II Budget Installation instructions manual

CONTENTS
Not included Seat and cover
Tighten the screws of the hinges clockwise. Untighten the screws half a turn 90°
anti-clockwise.
Insert the hinges into the toilet.
Clip on the toilet seat and cover.
Tighten the screws. Place covering caps on the hinges. Clip on the toilet seat and cover.
Align the toilet seat with the toilet. Remove the toilet seat by pressing both
push buttons.
Hinge set.
X2
X2
X2
X2

Care & Maintenance
To maintain the surface finishes, wipe occasionally using a mild detergent on a soft cloth,
and dry. Do not use abrasive cleaners or chemical household cleaners, and avoid contact
with any concentrated bleach.
Nabis products are manufactured to the highest of standards and should require little or
no maintenance. In the unlikely event of any spare part requirements, please contact our
Telephone Helpline number.
Telephone Helpline
Should you require any technical help in association with your Nabis products please call
0344 292 7062
Warranty: 5 YEARS
Wolseley UK
K2 Kingmaker Court
Warwick Technology Park
Warwick
CV34 6DY