Nacecare Mister Cart User manual

415 Annagem Blvd. Mississauga, Ontario, Canada L5T 3A7
Tel: [phone] Fax: [phone] Toll Free: 1.800.387.3210 Toll Free Fax: [phone]
www.nacecare.com
Instructions to assembly Mister Cart
1. Cart parts that would be inside the box

⚫Page 2
2. Tools needed –Phillipsscrewdriver, 13mm socket and wrench, 12mm wrench, 2 x 10mm
wrenches
3. Remove castors from mister machine using a 12mm wrench

⚫Page 3
4. Using the cart handle frame and two bases join using the 13mm socket and 13mm wrench
5. Disassemble the castors that came with the cart using the two @ 10mm wrenches

⚫Page 4
6. Align the front skid plate on top of the base frame
7. **TWO washers per side MUST be added to the REAR bushings of the machine**

⚫Page 5
8. With the spacers and washers in place, hand thread the bolts back into the machine base, then
using the 13mm sockettighten until snug.
9. Attach the grey wheels and caps to the castor assembly

⚫Page 6
10.Attach front clip to top oftray frame
11.Slide grey clip holder into slots

⚫Page 7
12.Attach grey holder to handle frame using three Phillips screws
13.Put grey tray into top frame