Nady Audio MaxTower MXTS-8 User manual

OWNERS MANUAL
Powered Subwoofer for the MaxTower
TM
PORTABLE SYSTEM
MXTS-8

2
TABLE OF CONTENTS
FEATURES
MXTS-8
Thank you for selecting Nady Audio
to meet your Portable PA needs!
• Designed to be used with MaxTower™ PAS-250 line array PA system
• Single 8” woofer, 60W maximum output internal amplier
• Combo XLR balanced and ¼” unbalanced input jack
• Balanced XLR line output for linking to 2nd MXTS-8 Subwoofer
• Bracket for top mounting MaxTower™ with optional MTMP-8 mounting pole
• Built-in carrying handle for easy transport
• Independent Level and Crossover (100Hz-220Hz) controls for tailoring desired sound
• Constructed of durable, lightweight MDF wood with weather-resistant painted nish
FEATURES ...................................................................................................................................2
WARNING ...................................................................................................................................3
INSTALLATION & OPERATION ...................................................................................................4
REAR PANEL CONTROLS & CONNECTIONS. ...........................................................................5
SPECIFICATIONS ........................................................................................................................6
ONE YEAR WARRANTY ..............................................................................................................7
Thank you for purchasing the NADY MXTS-8 Powered Subwoofer. This unit is designed to
work seamlessly with the NADY MaxTower™ PSS-250 portable line array PA system to deliver
optimal low-frequency impact. The 8” woofer
produces deep, strong bass for keyboards, kick
drum, bass guitar, and other instruments that play in
lower ranges. It connects to the MaxTower™ with a
single mic cable. The MXTS-8 was developed using
the expertise of professional sound engineers and
working musicians. When this subwoofer is used
with your MaxTower™, it will provide a PA with
superior performance and greater flexibility than
any other portable sound systems in its price range.
Please read this manual carefully to get the most out
of your new unit.

3
WARNING
IMPORTANT SAFETY INSTRUCTIONS
Your MXTS-8 is made of a very durable polymer composite material. However, extra care should be taken to protect the
nish and speakers. These simple tips will help reduce wear and tear on your MXTS-8.
1. Read all instructions before using.
2. Avoid direct contact with the speaker. Care should be taken to avoid damage to speakers.
3. Do not use or store around excessive moisture.
4. At very high volume this product may be capable of producing sound levels that could cause hearing damage. Do
not operate at uncomfortable levels for prolonged periods. If hearing loss or ringing in ears in experienced, consult a
physician.
5. The MaxTower should be positioned so that proper ventilation is maintained.
6. Keep away from heat sources such as radiators, heat vents, and other devices (including ampliers) that produce heat.
7. The MXTS-8 should be connected to a power supply described in the operating instructions or as marked. Replace fuse
with correct type, size, and rating.
8. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with other devices so that
the outlet has exceeded the maximum rating, and (3) never be left plugged into the outlet when not being used for a
long period of time.
9. This product should be serviced by qualied service personnel if:
• The power supply cord or the plug has been damaged.
• One of the speakers has been damaged.
• There has been excessive exposure to rain.
• The MaxTower does not appear to operate normally or exhibits a change in performance.
• The unit has been dropped, or the enclosure damaged.
• Do not attempt to service the product beyond what is described in these instructions. All other repairs should be
referred to qualied service personnel.
• Clean only with damp cloth.
STATEMENT OF RoHS COMPLIANCE
The included electronic parts and components are covered by the European Union Removal of Hazardous Substances
directive 2002/95/EC (RoHS). This directive seeks to eliminate the toxic substances released during manufacturing
processes to ensure that disposed of materials do not pose health risks. Considered toxic substances are lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE). Lead
is used together with tin in solder connections to reduce the melting point of solder. Lead-free solder requires higher
soldering temperatures which in turn places greater thermal stress on components.
The MXTS-8 complies with RoHS directives and uses components that are certied RoHS compliant
ATTENTION
: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
An equilateral triangle enclosing a lightening flash/arrowhead symbol is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure which may be of sufficient
magnitude to constitute a risk of electric shock.
An equilateral triangle enclosing an exclamation point is intended to alert
the user to the presence of important operating and service instructions in
the literature enclosed with this unit.

4
INSTALLATION & OPERATION
INSPECTION
Your MXTS-8 was carefully packed at the factory in packaging designed to protect the unit in
shipment. Before installing and using your unit, carefully examine the packaging and all contents
for any signs of physical damage that may have occurred in transit.
[Please note: Nady systems is not responsible for shipping damage. If your unit is
damages, do not return to Nady, but notify your dealer and the shipping company (if
shipped to you) to make a claim. Such claims must be made by the consignee in a timely
manner.]
CONTENTS
• Instruction manual
• MXTS-8 (verify unit’s serial number is same as shown on shipping carton)
• AC power cord
SETTING UP
• Place the MXTS-8 powered subwoofer (1) on the floor, ensuring there is adequate ventilation.
• The MXTS-8 can either be connected to the MaxTower™ PSS-250 on its own included tripod
speaker stand or the MaxTower™ (2) can be mounted on top of the MXTS-8 with the
optional MTMP-8 mounting pole (3).
• If using the optional MTMP-8 mounting pole, insert it into the mounting bracket (4) on top of
the MXTS-8 subwoofer. Then insert the top end of the pole through the recessed hole at the
bottom of the MaxTower™
• Plug the supplied AC power cord into the rear panel AC 115V jack (5), then the power cord
into a nearby 115VAC power outlet. The MXTS-8 is also available with the internal power
supply factory adjusted for 230VAC operation. Make sure that the unit is turned off before
connecting to the AC power source to avoid possible loud transients that can damage your
speakers or your ears.
• Plug in XLR or ¼” cable from the MaxTower™ output to Line In combo jack (6) of the MXTS-8.
• Turn on unit with Power ON/OFF Switch (7) on rear panel. The Power On LED (8) will light.
• Use LEVEL (9) knob to adjust subwoofer volume to the desired level so bass is in balance with
the volume of the MaxTower™ PSS-250.
• Use CROSSOVER (10) knob to adjust frequency cutoff to desired point between 100Hz and
220Hz for optimal sound.

5
REAR PANEL CONTROLS & CONNECTIONS
(1)
(3)
(4)
(2)
LINE IN LINE OUTLEVEL
POWER
AC 115V
100Hz 220Hz
CROSSOVER
MXTS-8
POWERED
SUBWOOFER
(5)
(8)
(7)
(6)
(9) (10)
REAR PANEL

6
SPECIFICATIONS
Power Handling: 60W Peak (30W RMS)
Speaker Impedance: 8 ohm
Woofer: 8”
Frequency Response: 100Hz to 220Hz (adjustable)
Cabinet: Front-loaded, vented, painted nish. Bass-reflex loaded with 2” tuned cylindrical port
Max SPL: 101dB
Inputs: Balanced XLR &Unbalanced ¼” (single combo jack)
Required Voltage: 115VAC/60Hz (230VAC/50Hz—internally switchable by factory only)
Fuse: 5x20mm glass tube F.B. 8A 250V @ 115VAC (4A 250V @ 230VAC)
Dimensions (H x W x D): 12”x 9.75”x 18.5” (3.x500x560mm)
Weight: 22.15lbs (10Kg)
The specifications above are correct at the time of printing of this manual for improvement
purposes, all specifications for this unit, including the design and appearance, are subject to
change without prior notice.
SERVICE FOR YOUR NADY AUDIO PRODUCT
Please do not return our product to the store where it was purchased. Nady Systems, Inc.
assumes the responsibility of keeping you a satised customer.
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND
WILL ALSO VOID THE WARRANTY.
If factory service is required, please call our Service Department at 510/652-2411 or e-mail
[e-mail] for a return authorization (RA) number. Make sure the RA number is clearly
marked on the outside of the package. If unit is past the One Year Warranty, The Nady Service
Department will provide a quote for service or replacement. Please make sure a cashier’s
check or money order is enclosed (if not prepaid with credit card) with the shipment to Nady.
If unit is within the One Year Warranty from purchase, please check Warranty terms for further
instruction before sending in unit.
Nady Systems will not repair nor be held responsible for any units sent without proper
identication and return address or RA number clearly marked on the package.
For service, please ship units prepaid to:
Nady Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA 94608

7
Nady Systems, Inc. warrants to the original consumer purchaser that your unit is free from any
defects in material or workmanship for a period of one year from the date of purchase. If any
such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace
the unit free of charge, subject to verication of the defect or malfunction upon delivery or
shipping prepaid to Nady Systems.
This warranty does not apply to defects or physical damage resulting from abuse, neglect,
accident, improper repair, alteration, or unreasonable use of the unit resulting in cracked or
broken cases or parts, or units damaged by excessive heat, and does not apply to batteries or
damage caused by leaking batteries. This warranty does not cover nish or appearance items
nor items damaged in shipment en route to Nady Systems, Inc. for repair. You must include
proof of date and place of purchase (i.e., photocopy of your bill of sale) or we cannot be
responsible for repairs or replacement. See Service section for further instructions.
Any applicable implied warranties including warranties of merchantability and tness are
hereby limited to one year from date of purchase. Consequential or incidental damages
resulting from a breach of any applicable express or implied warranties are hereby excluded.
This warranty is in lieu of all other agreements and warranties, general or special, express or
implied and no representative or person is authorized to assume for us any other liability in
connection with the sale or use of this Nady Systems’ product.
Note: Some states do not allow limitations on how long implied warranties last and do
not allow exclusion of incidental or consequential damages, so the above limitations and
exclusions may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.
International Customers: For service, please contact the NADY AUDIO distributor in
your country via the dealer from whom you purchased this product.
ONE YEAR WARRANTY

6701 Shellmound Street | Emeryville, CA USA 94608
T 510.652.2411 | F 510.652.5075 | www.nady.com