Nady Audio ProPower PSW18 Instruction manual

Congratulations!
You have just purchased one of the finest speakers on the
market today. The ProPower Series™ was developed using the
expertise of professional sound engineers and working
musicians. You will find your new NADY AUDIO speaker has
superior performance and greater flexibility than any other
speaker in its price range.
We recommend that you read this instruction sheet carefully to
get the most out of your new unit. Thanks for selecting NADY
AUDIO and the PSW18 as your choice in speakers.
Ruggedly built, exceptional sound, most affordably priced –
the ProPower Series™ from Nady Audio delivers the best
value in PA speakers
• 18” subwoofer speaker with 2” voice coil, 50 oz. magnet
• Peak power rating: 600W (300W RMS)
• Durable black carpet cover
• Heavy duty plastic protective corners
• Binding post (banana jack) and two 1/4” (6.3 mm) jack inputs
• Response: 20-400Hz
• 8Ωimpedance
• Sensitivity (1W/1M): 90dB
• Weight: 57.2 lbs (25.9 Kg)
• Dimensions (WDH): 22.4” x 16” x 25.5” (56.9 cm x 40.6 cm x 64.8 cm)
• Optional SMP-3 speaker mounting pole available
WARNINGS
• Read all instructions before using the product.
• This product may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time at a high
volume level or at a level that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should consult an audiologist.
• To avoid damage to the drivers, never overload the speaker.
• To avoid the risk of fire, do not ever expose the speaker to a source of
naked flames. Also, it should be located away from heat sources such as
radiators, heat vents, or other devices (including amplifiers) that produce
heat.
• The product should be positioned so that proper ventilation is maintained.
• This speaker is designed for indoor use only. Do not expose to weather or
high humidity, rain, etc.
• Care should be taken so that objects do not fall into, and liquids are not
spilled through, the enclosure’s openings. Do not place containers of liquids
on the speaker.
• Don’t place any heavy appliance or object (>130lbs/60kg) on the speaker
enclosure.
• This unit is to be installed by qualified personnel only.
• This speaker is only to be used with power amplifiers complying with the
safety requirement of EN or IEC60065.
• This product should be serviced by qualified service personnel if:
A. Objects have fallen into, or liquid has been spilled onto the product.
B. The product has been exposed to rain.
C. The product does not appear to operate normally or exhibits
a marked change in performance.
D. The product has been dropped, or the enclosure damaged.
• Do not attempt to service this unit. All servicing should be referred to
qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS
When using this speaker, basic precautions should always be taken, including the following:
FEATURES
AND SPECIFICATIONS
PSW18
Subwoofer Speaker
ProPower Series™Speakers
Features, Instructions
& Technical Data

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at [phone]
or e-mail at [e-mail].
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
SERVICE
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: [phone] • Fax: [phone] • www.nady.com
SPECIFICATIONS
TECHNICAL DATA
IMPEDANCE RESPONSE
22.4”
25.5
16”
Side View
Back View
Top View
110
100
90
80
70
60
50
40 -135
30 20 Frequency
dB spl Deg
100 500 1k Hz 5k 10k 20k
180
135
90
45
0
-45
-90
-180
Magnitude Sound Pressure Level Phase
SMP-3