Nady Systems PMC-2X User manual

NADY PMC-2X
Driver-Passenger
Personal Motorcycle Communicator
OWNER’S MANUAL
NADY SYSTEMS, INC.
6701 Shellmound Street, Emeryville, CA USA 94608
Tel: [phone] Fax: [phone]
www.nady.com
MOTORCYCLE
INTERCOM
FRS radio IN/OUT jack: Impedances 1k / 16 Ohms
PTT input jack: NO PTT SW
AUX input jack: Stereo L+R inputs 10 / 10 Ohms
Controls: High / Low Volume adjust
button, OFF / Intercom switch
Connectors: Passenger, Driver, Aux in, Ext. PTT,
2-way Radio (3.5mm TRS jacks); 5 VDC input,
3.5mm TS jack (TIP = NEG)
Audio Output to Headphone: 150mW / 16-32
Ohms
Headphone Impedance: 16 or 32 Ohms
Mic Impedance: 600 Ohms – Unidirectional
Electret Condenser
Housing Material: Cases and headset, both high
impact ABS plastic
Size: 4.0" x 2.75" x .65” (102 x 70 x 17 mm)
Weight: 3.1 oz. (79 grams)
Batteries: 3 AAA, 1.5V Batteries
PLEASE READ BEFORE USING YOUR PMC-2X
Before you connect your intercom earphone and mic, it is important to make sure that the metal
parts of the plug and jack are clean and dry, especially in cold weather. To prevent dirt or moisture
from damaging your intercom, always wipe the metal part of the plugs with a clean, dry cloth
before plugging in. We also suggest that you use a tuner cleaner spray (available at any electronics
supply store) to spray the plugs and jacks once a month to keep the contacts clean.
SERVICE FOR YOUR NADY COMMUNICATOR
(U.S.) Should your motorcycle communicator require service, please contact the Nady Service
Department via telephone at [phone] or e-mail to [e-mail] for a Return
Authorization (R/A) Number and a service quote (if out of warranty). Make sure the R/A Number is
clearly marked on the outside of the package and enclose a cashier’s check or money order (if not
prepaid with a credit card). Ship the unit prepaid to: Nady Systems, Inc., Service Department, 6701
Shellmound Street, Emeryville, CA 94608. Include a brief description of the problems you are expe-
riencing.
The warranty card enclosed with this system contains additional valuable warranty and serv-
ice information. Keep it in a safe place for future possible reference. Do not attempt to service
this unit yourself as it will void the warranty.
(International) For service, please contact the Nady distributor in your country through the dealer
from whom you purchased this product.
Contact your dealer or Nady Systems for more information on our complete line of advanced
products for your motorcycle communication needs.
PMC-2X Specifications
Specifications subject to change without notice
PMC2X_manual 3/3/04 4:49 PM Page 1

How to use the Nady PMC-2X Intercom with FRS Connection
1) Powering the PMC-2X: Place 3 freshAAA, 1.5 volt batteries into Battery Compartment (1), not-
ing correct polarity. Alkaline batteries are recommended for long duration performance. If you wish
to operate this unit with external power, plug the optional DC-5V adapter into the external DC Jack
(2). Connect the other end of the adapter to your 12V DC motorcycle battery.
2) Connecting Your Headset: Insert both the driver and passenger headsets in the two Headset
Jacks (3).
3) Intercom Only Operation: Flick INT/OFFswitch (4) to "INT" position to turn on power. Apower
LED (5) lights to indicate the unit is in operation.
4) To Adjust Volume Control: Simply press the Volume Up (6) or Volume Down (7) buttons to
achieve a comfortable listening level. You are now ready for full duplex, simultaneous two-way con-
versation.
5) External Music (Aux In) Operation:
AUX IN: To add an external music source (Portable Tape/CD player, AM/FM radio) to the PMC-2X,
use an ordinary stereo mini-phone plug jumper cable (3.5mm TRS phone plugs both ends) and insert
one end into the AUX IN jack (8). Connect the other end to your external sound source. For proper
operation, please verify that the audio source has less then 200mW @ 8 ohms audio output power.
(6)
(3)
(1) (2)
(4)
(7)
Use the volume setting from the sound source to adjust the external audio to a comfortable listening
level.
+ Stop here if you do not plan to connect the PMC-2X to an external FRS/GMRS or PMR 2-way
radio or cell phone. Otherwise, proceed to section #6 for 2-way radio/ cell phone connection and
operation.
6) PMC-2X/2-Way Radio/ Cellphone Connection and Operation:
In order to operate your unit with your own FRS/GMRS or PMR 2-way radio or cell phone, please
note the following:
a. Your 2-way radio must have it’s own internal VOX (voice activated transmission) function and
a jack for connecting an external headset. Radios without these features cannot be used with
the PMC-2X.
b. Your cell phone must have an external headset jack and be compatible with the optional cables
available for interconnection with your PMC-2X.
c. You must also purchase either the optional OCA-XC (for closed-face helmets) or the OCA-XO
(for open-face helmets) cable assembly kit which will provide the cables, headsets, PTT, and
cable adapters to enable operation with virtually all models of properly equipped 2-way radios
and cell phones. If not available from your dealer, please see the OptionalAccessories
Ordering Form included.
Use with 2-Way Radio/Cellphones: To connect to the 2-way radio or cell phone to the PMC-2X,
use the appropriate jumper cable (PMC-XC or XY-see Optional Accessories Ordering Form) and
insert one end into the TO RADIO jack (9), and the other end into your 2-way radio or cell phone
external headset jack. Use the volume setting on the 2-way radio or cell phone source to adjust the
audio to a comfortable listening level.
Using External PTT Cable: To connect the external PTT (push-to-talk) button switch included with
the optional OCA-XC/O kit to the PMC-2X, use the external PTT switch cable and insert the plug
into the EXT PTT jack (10). The PTT button end can be easily mounted with the Velcro strap
attached on your motorcycle’s handle bar for convenient control of your 2-way radio’s transmission
function. (Your 2-way radio must have its VOX turned on to use this feature.) You cannot use this
PTT function with cell phones and do not need to as they are duplex already (simultaneous 2-way
conversation like the intercom).
Your PMC-2X is now ready for bike-to-bike communication with your riding partner(s) through
your existing 2-way radio. Or even safe, convenient communication with anyone, while riding,
through your cell phone.
Note: Your 2-way radio should be kept at least 1” to 5” away from the PMC-2X to prevent possible
RFI interference and ensure optimal operation.
(5) (10)(9) (8)
PMC2X_manual 3/3/04 4:49 PM Page 2