4
Nagra –CLASSIC AMP
Important safety warnings
Before operating the CLASSIC AMP, read this manual carefully
Should you have any questions on how to setup or use your CLASSIC AMP, please
contact your Nagra dealer.
Do not attempt to open the amplifier under any circumstances. Refer any service
/ repair work to Nagra qualified personnel. There are no user serviceable parts
inside the amplifier
Audio Technology Switzerland SA declines all responsibility in the event of an
accident caused by the non-observance of these instructions or any other form of
user negligence
To work correctly in your country, the CLASSIC AMP has a specific power supply
for 100, 115 and 230V. The power supply voltage can only be changed at the
factory. Make sure you have the right operating voltage before switching your
amplifier on.
Warranty
AUDIO TECHNOLOGY SWITZERLAND SA, designer and manufacturer of Nagra
products, certifies that this instrument was thoroughly inspected and tested prior
to leaving its factory and is in accordance with the data given in the
accompanying measurement protocol and test sheet.
We warrant the products of our own manufacture against any defect arising from
faulty manufacture for a period of three years from the date of delivery to the
user.
Warranty will be void if the serial number has been removed from the unit.
This limited warranty covers the repair of confirmed defects or, if necessary, the
replacement of the faulty parts, excluding all other indemnities.
All freight costs, as well as customs duty and other possible charges, are at the
customer's expense.
We decline any responsibility for any and all damage resulting, directly or
indirectly, from the use of our products.
We reserve the right to modify the product, and / or the specifications without
notice.
