NANO SEPURA WMB User manual

installation manual
SEPURA™WMB
wall mounting brackets
for SEP 120 &SEP 360 units
easy install
Useful wall mounng brackets that allow
smaller units be raised o the oor for
convenience.
benets of wall mounted units:
• free up valuable oor space
• less chance of damage from machinery
• easier height to take test samples from
• dier workspace
The SEPURA™ WMB comes in two sizes to t our SEP
120 and SEP 360 units.
360WMB
120WMB

Secure the WMB to the wall/at surface using
suitable xings (see NOTE above).
12 3
Replace the foam ring back over the hook that
will form a seal with the unit when in place.
Remove the rear black knockout from the
SEP 120 / SEP 360 so that the hook can
be fed through.
Feed the wall hook through the hole in the
rear of the unit and gently lower down onto
the support feet.
4
Easy Hook
Allows the unit to be lied on and o quickly
copyright PURIFICATION SOLUTIONS LLC
publication reference n-psi-S1-WMB-00-us
tel: [phone]
email: [email protected]
www.n-psi.com
Secure Fix
Prevents tampering or quick removal
oponal xings supplied:
Before installing the WMB (Wall Mounng Bracket), please read the following guidelines.
• Find the opmum locaon for the installaon.
It is important the chosen anchor point can
safely support 15.5 lb WMB120 and/or 37.5 lb
WMB360.
• Ensure that the chosen posion will allow safe
maintenance, servicing & weekly water tesng
access
• Safely x the WMB, plumb, level, square & true
to the anchor point using the correct ngs in
all 4 xing holes provided specic to the instal-
laon requirements.
• All WMB installaons must comply to Health &
Safety Legislaon and/or Regulaons.
NOTE: nano does not supply xings for the WMB with each kit. It is your responsibility to use appropriate
xings for the surface that you wish to aach it to. nano is not responsible for any accidental or
performance issues arising from fxing of the WMB unit.