Nanosat NANO Premium User manual



User's Manual 1
Table of Contents
Safety Warning
General Information
Package Contents & Features
Front Panel
Rear Panel
Remote Control Unit (RCU)
Programing the Remote Control
Installing Equipment
Channel List Guide
Menu Guide
Main Page
I. CHANNEL MANAGER
II. INSTALLATION
III. OPTIONS
IV. UTILITY
Troubleshooting
Specifications
Brand List
TABLE OF CONTENTS
Table of Contents
1
2
3
3
4
5
6
8
10
11
13
13
13
15
20
22
23
24
26

User's Manual
2
SAFETY WARNING
Warning
Please read the following recommended instructions carefully to avoid the risk of your physical Injury
before the product is operated.
Safety Instructions and Precautions
-Do not cover the receiver and keep clear space around the receiver for sufficient.
-Check the receiver's operation voltage 90~250V, 50Hz~60Hz, Max 30W Keep liquid away from the
receiver.
-The receiver shall not be exposed to dripping or splashing and no objects that filled with liquid shall
not be placed on the receiver.
-Unplug the receiver from the wall outlet before cleaning.
-Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
- Do not block the receiver's ventilation slots which are provided for ventilation and protection from
overheating.
-Please maintain the receiver in a free airflow.
-Do not allow the receiver to be exposed to hot, cold or humid condition.
-Do not use any cable and attachment that are not recommended as these may damage your equip-
ment.
-Please unplug the receiver from the wall outlet and disconnect the cable between the receiver and the
antenna when you will not use it for long time.
- Do not remove the cover to reduce the risk of electric shock.
-Do not attempt to service the receiver yourself.
-Refer all serving to qualified service personnel.
-The contents of manual may be updated without notice.
NOTE: To disconnect the apparatus from the mains, the plug must be pulled out from the mains sock-
et, therefore the mains plug shall be readily operable.

User’s
Manual
User’s
Manual
Please ensure that the following items are included with the receiver in your packing.
Remote Control
Unit
User's Manual
Batteries 2EA
(for RCU)
User's Manual 3
GENERAL INFORMATION
Package Contents & Features
User’s
Manual
AV/TV
Package Contents
Features
•Home streaming
•Live IP Movie/Radio
• 2 x USB 2.0 Hosts (Access to HDD, USB memory, Others etc)
•Wi-Fi Ready (Optional)
• Universal Remote
•Built-In Ethernet Port
•MP3 File Play by USB 2.0
•PVR Ready via USB
•Recorded file play on PC
•Reservation Recoding by EPG function
•MPEG-II Digital & Fully DVB Compliant.
•C/KU band control for each antenna
•LNB Tone Switch 22KHz mode on/off'
•Multi-LNB controlled by DiSeqC =>DiSEqC 1.0, 1.1, 1.2 and USALS
•Total 8,000 Channels Programmable
•Blind Scan
•Picture In Graphic (PIG)
• Electronic Program Guide (EPG) for On Screen Channel Information
•Multi-language supported for Menu and OSD
•Zoom Function by 2x...4x
•Parental Lock
•Closed Caption Support
•CVBS Video & Audio Output via RCA
•Component YUV Output via RCA
•7-Segment(4-digit) Type of Front Panel Display
•Upgrade Software & Update Channel Database through USB 2.0 Port
User’s
Manual
A/V Cable

User's Manual
4
GENERAL INFORMATION
1
2
3
4 96
11
15 16
10
12
7
5
8
13
14
1 4
2
3
1. CH Up/Down
Channel up / down or select the item of Menu.
2. VOL Left/Right
Volume left/right or select the item of Menu.
3. POWER Button
Switch between Power on and Standby modes.
4. USB Port
To upgrade firmware.
NOTE: The front panel of the product is subject to change without notice.
Front Panel

User's Manual 5
GENERAL INFORMATION
Rear Panel
1
2
3
4 96
11
15 16
10
12
7
5
8
13
14
1. SAT IN
Connect to Satellite antenna cable.
2. LOOP OUT
Connect to another STB.
3. DIGITAL AUDIO
Output for connecting to a digital amplifier.
4. AUDIO-R
Connect to AUDIO RIGHT to TV or other equipment.
5. VIDEO
Connect VIDEO to the TV or other equipment.
6. AUDIO-L
Connect to AUDIO LEFT to TV or other equipment.
7. YUV
Connect to the YUV jack of TV.
8. DIGITAL AUDIO
Output for connecting to a digital amplifier.
9. S-VHS
Connect to the S-VHS jack of TV.
10. TV / VCR
Connect to TV or VCR.
11. ANT
Connect to TV antenna input.
12. ETHERNET
Connect to Lan cable. (RJ-45)
13. RS 232
Connect to personal computer for software upgrade.
14. USB PORT
Connect to USB device.
15. POWER SUPPLY
90~250V AC, 50/60Hz, 30W.
16. POWER BUTTON
Turn On/Off.
NOTE: The rear panel of the product is subject to change without notice.

GENERAL INFORMATION
Remote Control Unit (RCU)
1 2
3 4
5 6
7
10 11
14 15
16 17
18
21
20
23 24
27
29
31 33
35
19
22
25 26
28
30
32
34 36
37
38
AV/TV
39
89
12 13
User's Manual
6

User's Manual 7
GENERAL INFORMATION
Remote Control Unit (RCU)
1. POWER
Switch the receiver between operation and standby mode.
2. TV POWER
Turn on/off the TV.
4. STB
Switch to STB mode.
4. TV
Switch to TV mode.
5. VCR
Switch to VCR mode.
6. DVD
Switch to DVD mode.
7. Numeric buttons
Select the TV or Radio service channels and individual
menu.
8. TV / RADIO
Switch between TV and Radio.
9. AV / TV
Select the TV or AV mode.
10. RECALL
Select the previously viewed channel.
11. INPUT
Select the TV external input.
12.
Move down a page in the channel list.
13.
Move up a page in the channel list.
14. MENU
Display the main menu on screen.
15. EXIT
Return to the previous menu or normal viewing mode
from a menu.
16.
Change channel or move to the item in the menu.
17.
Adjust the volume or move to left or move item in the
menu.
18. OK
OK button.
19. FAV
Toggle the selected favorite mode.
20. SAT
Toggle the selected Satellite list.
21. PAL / NTSC
Switch PAL or NTSC mode.
22. INFO
Display the program information box on the screen and
edit the name of favorite channel list.
23. AUDIO
Change the audio languages.
24.
Select the sound mode(LEFT/RIGHT/STEREO).
25. EPG (Electronic Program Guide)
Display the TV or Radio program guide.
26.
Enable subtitle and teletext mode.
27. V+ / V-
Turn volume up or down.
28. P+ / P-
Change channels up or down on normal mode.
29. MUTE
Enable or disable the audio.
30. RF CH
Select the RF channel.
31. Fn
Reserved.
32. V.Format
Switche to HD Type.
33.
PR
Reserved.
34. REWIND
Start reverse playback and change the speed of reverse
playback.
35. F / F
Start fast forward or fast motion playback and change the
speed of forward playback.
36. PLAY
Display file lists and plays slow/normal.
37. STOP
Stop recording or playing.
38. PAUSE
Pause the playing picture or go to normal mode.
39. RECORD
Record the program.

GENERAL INFORMATION
Programing the Remote Control
1 2
34
56
7
10 11
14 15
16 17
18
21
20
23 24
27
29
31 33
35
19
22
25 26
28
30
32
34 36
37
38
AV/TV
39
89
12 13
AV/TV
1
2
3
4
User's Manual
8

There are two ways to program the remote control ; Automatic Code Search or Direct Entry.
I. Usnig Automatic Code Search
1) Turn on the component you want to control (TV, VCR or DVD).
2) Press and hold the component key you want to program. Holding the component key until the LED on the
remote control turns on, then release the key.- ➊
3) Point the remote at the component, press and release the ➌UP (
) button, then wait three seconds or
until the LED stops flashing.
At this point the remote control is searching for the correct code to program. If, after three seconds, the
component you want to control does not turn off, press and release ➌UP (
) button again to tell the
remote to search the next set of codes.
4) If the component you want to control does turn off; Press and release ➍OK Button , then the LED blinks
three times.
II. Using Direct Entry Method
1) Turn on the component you want to control (TV, VCR or DVD).
2) Locate the enclosed Code List. Find your brand of the component you want to control.
3) Press and hold the component key you want to program. Holding the component key until the LED on the
remote control turns on, then release the key.
4) Enter 3-digit code from the code list, then the LED blinks three times.
5) If you get no response, repeat these steps using the next code listed for your brand until the component
responds to the remote control command.
III. Changing Volume Lock
Locking the volume controls to a single device makes it easier to control volume, without having to guess
whether the volume will change. If you lock the remote's volume controls to the TV , you will always be able to
change the volume to the level you want, without having to adjust it on multiple devices.
If you want to lock the volume for the STB component ;
1) Press and hold the STB component key until the LED on the remote control turns on.
2) Enter 3-digit code, 9 9 9 .
3) Press and release the STB component key, then the LED blinks three times.
Unlocking volume control ;
If you want to unlock the volume for the STB component ;
1) Press and hold the STB component key until the LED on the remote control turns on.
2) Enter 3-digit code, 9 9 9 .
3) Press and release the STB component key, then the LED blinks three times.
User's Manual 9
GENERAL INFORMATION
Programing the Remote Control
Programing the RCU

User's Manual
10
INSTALLING EQUIPMENTS
Connections
This section explains several ways of connecting the receiver to your existing TV, VCR and Hi-Fi system. You
can choose one of the following setups that we recommend. If you have any problem or need help, consult
your dealer or service provider. Please ensure that the following items are included with the receiver in your
packing.
Connecting the receiver to TV and VCR with RF cable
Connect one end of the RF cable TV/VCR socket on the rear panel of the receiver and the other end to the
ANT IN on the TV. Connect one end of the RF cable to the ANT socket on the rear panel of the receiver and the
other end to the ANT OUT on the VCR.
Connect one end of the Component cable to the Audio-R(Red), the Audio-L(White)and the Video (Yellow)
socket onthe rear panel of the receiver and and other end to the Audio-R(Red), the Audio-L(White) and the
video (Yellow) socket on the TV.
Connecting the receiver to TV with Component cable

User's Manual 11
CHANNEL LIST GUIDE
Channel List Guide
1. Normal Live Mode
a) When you select one channel, information bar appears
automatically on the screen for few seconds. This bar
provides you the current channel information.
b) Press INFO button to see the information during normal
live mode.
2. Simple Channel List
a) Press OK on the normal live mode to go to the channel
list.
b) When detail channel list is displayed on screen press
RED button to go to simple channel list..
3. Detail Channel List
a) Press OK on the normal live mode to go to the channel
list.
b) When simple channel list is displayed on screen press
[RED] key to go to detail channel list.
c) Press
◀▶
and
▲▼
to sort by Alphabet.
d) Press SAT button to sort by Satellite and FAV button for
Favorite 1~8.
e) Press GREEN button to return to All Channel or EXIT to
return to the current live channel.
f) Press the SAT key to show Satellite Pop-UP Window then
select satellite. Channel list of selected satellite will be
displayed.
g) Press the FAV key to show Favorite Pop-UP Window then
select FAV list. Channel list of selected FAV will be dis-
played.
h) Press the Green key then all searched channel list will be
displayed.
i) Press MENU key then cursor will move to ALL, placed on
the left.
j) Sort Key (Yellow Key)~A~Z/Z~A/FAT/CAS.
k) Press Yellow key for sorting A~Z/Z~A/FAT/CAS. If you
want to go back to unsort from the selected CAS go
back to Pop-UP Window then select unsort.
CHANNEL LIST GUIDE

User's Manual
12
CHANNEL LIST GUIDE
Channel List Guide
4.EPG (Electronic Program Guide)
a) Press EPG button on the live mode.
b) EPG of the current channel appears on the screen.
c) Select the channel that you want to watch program.
d) To reserve program with recording function, press REC
button once. (PVR model only)
e) Red Circle will appear like the right side picture.
f) If you reserve program, then it will be record automati-
cally at reserved time.(PVR model only)
g) To activate event timer, press REC button twice.
h) Green Circle will appear.
i) If you like to cancel reserved program, press REC button
until Red or Green Circle disappears.
j) Press OK button twice to return to current live channel.
5. ZOOM IN/OUT
a) By selecting page up key ( ) in a normal live mode you
can use Zoom In/Out function.
b) From the Pop-Up Window of Zoom function you can
select(*2*3*4)by page up key( ), for Zoom out press
page down key.
c) When you move cursor of Zoom focus by key (▲▼◀ ▶)
then you can select Zoom In/Out on the focused point
by pressing page up/down keys. Press Pause key then
live mode will be paused on the mode of Zoom.

Press the [MENU] key on the RCU to open Main
Page on the screen. Main Page will be displayed.
1. You can move into the main page using ▲▼◀ ▶
on the RCU.
2. Press [OK] to confirm your selection.
3. Press [EXIT] to return to the previous menu or press
[MENU] to go to the current live channel.
This chapter explains to organize channels according to your preference.
1. Select Channel Manager in the Main Page with ▲▼ and press OK.
2. TV Channel Manager Page displays on the screen.
3. Select the mode that you want using◀▶.
4. To see the channel that you choose, go to the channel and then press RED button.
5. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
I-1. Favorite
User's Manual 13
MENU GUIDE
I. Channel Manager
MAIN PAGE
I. CHANNEL MANAGER
I-1. Favorite
I-2. Rename
I-3. Move
I-4. Lock
I-5. Delete
1. Using ◀▶go to the Favorite mode then press YELLOW
button to choose Favorite 1~8.
2. Press OK on the channel that you want to add or delete.
3. will be marked at the end of selected channel name
bar. To delete press OK again.
4. Selected channels will be automatically saved.
5. If you want to check the saved Favorite Channel List go
to other mode(Rename~Delete) except Favorite and then
press FAV button to check Favorite 1~8.
6. Press EXIT to return to the previous menu or press
MENU to go to the current live channel.

User's Manual
14
MENU GUIDE
I. Channel Manager
I-2. Rename
1. Using◀▶go to the Rename mode.
2. Select the channel that you want to rename using ▲▼
and then press OK.
3. Keypad Dialog displays on the screen.
4. Edit the name entering NUMBERS and / or WORDS in the
Keypad Dialog.
5. Press YELLOW button to rename Favorite 1~8 and press
BLUE button to rename Satellite.
6. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
I-3. Move
1. Using◀▶go to the Move mode.
2. Select channels which you want to move by pressing OK key.
3. Move cursor that you want to place on than press GREEN
button.
4. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
I-4. Lock
1. Using◀▶go to the Lock mode.
2. Select the channel that you want to lock and then press
OK. will be marked at the end of the selected chan-
nel name bar. To delete press OK again.
3. Press EXIT to go to Main Page or press MENU to go to
the current live channel.
I-5. Delete
1. Using◀ ▶go to the Delete mode.
2. Select the channel that you want to delete and then
press OK. will be marked on the selected channel
number. To delete press Blue button again.
3. Press YELLOW button to delete TP. Select one channel
and press Blue button. All channels of that TP will be
automatically selected.
4. Press YELLOW button to delete Satellite. Select one chan-
nel and press Blue button. All channels of that the
Satellite will be automatically selected.
5. Press EXIT to return to the previous menu or press MENU
to go to the current live channel.
6. Message Box displays on the screen.
7. Select OK on the Message Box and then press OK to
delete the marked channels.

User's Manual 15
MENU GUIDE
II. Installation
II. INSTALLATION
This section may help you to set up antenna and
scan satellite or transponder, etc. Select Installations
in Main Page using ▲▼ and press OK.
Press EXIT to return to the previous menu or press
MENU to go to the current live channel.
II-1 Channel Search
II-2. DiSEqC Switch
II-3. Motor Setup
II-4. Network
II-1 Channel Search
1. You can move the cursor using ▲▼ and press OK
when you select the value that you want.
a) Satellite
- Press OK to display the Satellite List Box.
- Select the proper Satellite and then press OK.
b) DiSEqC
- Press OK to display the DiSEqC Port List.
- Select the proper DiSEqC port and then press OK.
c) Frequency
- Press OK to display the Frequency List.
- Select the proper Frequency and then press OK.
d) LNB
- Press OK to display the LNB Frequency List.
- Select the proper LNB Frequency and then press OK.
- You can also input directly the numbers using NUMBER
KEY on the RCU.
e) 22KHz Tone
- Select the one among None, 0 KHz or 22 KHz depending
on the user’s antenna switch box.
f) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then press OK.
g) Search
- Press Search to start scan channels.
- Selected Satellite displays on the screen.
- Press ▶to select more Satellite or ◀to cancel the selected Satellites.
- Press OK to start scanning.

II-2. DiSEqC Switch
1. Select Channel Search in Installation using ▲▼
and press OK.
a) If you select DiSEqC Switch and press OK on the menu
will be, DiSEqC Switch Page will be displayed.
b) Select the proper Satellite of each DiSEqC port (A~D)
using ◀▶and ▲▼ and press SEARCH. Selected
Satellites will be searched automatically.
II-3 Motor Setup
1. You can move the cursor using ▲▼ and press
OK when you select the value that you want.
a) Motor Type : DiSEqC 1.2, USAL
- Press OK to display Motor Type
- Select the proper Motor Type and then press OK.
b) Satellite
- Press OK to Display the Satellite List Box
- Select the proper Satellite and then press OK.
c) Switch & LNB
- Press OK to Display the LNB frequency list or Switch
Setting
- Select proper LNB & proper Switch.
d) Frequency
- Press OK to Display the Frequency List.
- Select the proper Frequency and then press OK.
e) Motor Movement
- Search the appropriate position of the selected Satellite
using ◀▶
.
User's Manual
16
MENU GUIDE
II. Installation

User's Manual 17
II-3 Motor Setup
f) Motor Control
Select the position using ◀▶and then press OK.
Message box displays on the screen.
- Store Sat position : Stores the current position of the
motor for the selected satellite.
- Goto Sat Position : Moves the motor to the stored posi-
tion of the selected satellite.
- Goto 0 : Goes to the center of the motor.
- Reset Position : Resets all stored position of the motor.
MENU GUIDE
II. Installation
g) Satellite Position
- Input directly the position using NUMBER KEY on the RCU
- Select the direction using ◀▶(WEST / EAST).
h) Search Option
- Press OK to display the Search Option list.
- Select the Search Option that you want and then press OK.
i) Search
- Press Search to start scan channels.
- Press OK to start scanning.
2. Edit my local position
- Press Green Button to edit local Position.
a) Longitude
- Input directly the Longitude using NUMBER KEY on the RCU.
- Select the direction using ◀▶(WEST / EAST).
b) Latitude
- Input directly the Latitude using NUMBER KEY on the RCU.
- Select the direction using ▲▼ (NORTH / SOUTH).
3. Press EXIT to return to the previous menu or press MENU to go to the current live channel.
◈TP EDIT
To Edit TP Press the RED button on the
RCU.

User's Manual
18
MENU GUIDE
II. Installation
II-4. Network
This section may help you to set up network con-
figurartion.
1. IP Setup
Select one from three kinds of options for
Network Setting.
a) Not Use
- In this case, network is disabled.
b) Automatic
- This is for user to use dynamic IP address service. After
Select Automatic, and just push Apply button, Box will
get a new IP from router.
c) Manual
- This is for user to use static IP address service Put in
with your IP address, Subnet mask and Gateway. And
push Apply button, then Box will reboot by itself.
2. Home Streaming
Home Streaming feature enables to watch downloaded
MPEG movie files with your TV directly. First, please set
up the Home Streaming program in your computer, and
then configure your unit according to your router infor-
mation to connect with computer.
There are 3 tabs in Home Streaming Program.
1st Tab (Movies) : It shows file list in PC server
2nd Tab (Download) : Reserved for future function
3rd Tab (Preference) : Configuration
1) Setting in your PC
a) Please go to “Preference” Tab
b) Select “Use” default” check-box and assign the
download folder by using “Browse”
It is assigned to “c:\download” but you should
specify the destination folder personally.
Table of contents
Other Nanosat Receiver manuals