NAPCO ISEEE-CAMIR36 User manual

1
ISEEE-CAMIR36
NAPCO
ISEEE-CAMIR36
Varifocal IR Bullet Camera w/550 TV Lines
OI339 9/07
R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, [phone]
For Technical Service, [phone]
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2007
•1/3" Super HAD High Resolution True Day/Night Color CCD
•550 TVL (Color) / 580 TVL (B/W)
•3.8 ~ 9.5mm / F1.2 Externally Adjustable Varifocal Auto Iris Lens
•36 IR LEDs with 120' Range
•Built-In Service Monitor Port
•0 Lux Operation (IR LEDs On)
•IP66 Weatherproof Rated
•12VDC / 24VAC Dual Voltage Operation

2
ISEEE-CAMIR36
RISK OF ELECTRIC SHOCK WARNING
WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS
OR OTHER OPENINGS ON THE EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRI-
ANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED
'DANGEROUS VOLTAGE' WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PER-
SONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTE-
NANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
PRODUCT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVERS (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION

3
ISEEE-CAMIR36
CONTENT VERIFICATION
Prior to the installation of this camera, please verify that the packaging contains the following:
1. One ISEEE-CAMIR36 Camera
2. One Secondary Video Output Cable
3. One Sunshield
4. One Instruction manual
5. One Accessory Pack containing
a. Allen Wrench
b. Brass Screw Driver
c. Sunshield Thumb Set Screw
If any of the contents are missing, please contact the NAPCO Customer Help Desk immediately.

4
ISEEE-CAMIR36
FEATURE HIGHLIGHTS
EMPHASIS ON USER FRIENDLINESS
The ISEEE-CAMIR36 features Sony HQ1 technology with high resolution of 550 horizontal TV lines and a
weather resistant housing with easy external adjustment of camera features.
¾Zoom and focus can be easily adjusted without opening the camera.
¾External DC level controller provides easy iris adjustment for brightness control.
¾Secondary video output adds convenience to the adjustment of the viewing angle, direction,
brightness, focus and zoom adjustment after installation.
¾Multi-directional mounting bracket allows installation of the camera virtually on any surface and
feed-through minimizes potential vandalism while improving the aesthetics of the installation.
¾ICR Vari-focal DC Auto Iris Lens at 3.8 ~ 9.5 mm F1.2.

5
ISEEE-CAMIR36
ISEEE-CAMIR36 LAYOUT / FUNCTIONS
1. Protective Film over Front Glass
•The blue protective film must be removed before use.
2. Focus / Zoom Screws
•Adjust the angle of view by turning the zoom screw to "W' for a wider field of view, and to "T" for a
narrower field of view.
•Adjust the focus screw to "N" or to "∞" until the sharpest focus is achieved.
3. DC Level Volume Cap
•Remove this cap to adjust DC Iris Level.
•Turn the DC lever clockwise for a brighter picture, and counter-clockwise for a darker picture.
4. Service Video Port
•Remove this cap and connect the supplied service monitor cable to connect to a service monitor for
final adjustments.
5. Feed-Through Mounting Bracket
•Use the supplied screws to mount bracket base to the desired location.

6
ISEEE-CAMIR36
WIRING CONNECTIONS
The camera should be powered by the following power supplies:
12VDC 1000mAmps or 24VAC 20VA, CSA Certified Class 2 Power Supply.
For optimum video signal, use 95% copper shielded coax cable. Twisted pair or Category 5e cable may
also be used with optional Passive Video Transceivers. Maximum cable distance for 95% copper braid
coax is approximately 800 feet. For Category 5e or twisted pair, 1500 feet using transceivers.
DIMENSIONS

7
ISEEE-CAMIR36
SPECIFICATIONS
Image Sensor 1/3" Interline transfer type color CCD (SONY)
Effective Pixels 768H x 494V (380K pixels)
Scanning System 525 Lines 2 : 1 Interlace
Scanning Frequency 15.734KHz (H), 59.94Hz (V)
Resolution 550 TV – Lines, 580 TV – Lines (B/W)
Shutter Speed 1/60
S/N Ratio More than 48dB (AGC Off)
Sync. System Internal
Min. Illumination 0 Lux (IR LED ON)
White Balance ATW / AWC selectable
Video Output VBS 1.0 Vp-p (75ohm load)
Lens Vari-Focal DC Auto Iris IR Lens 3.8 ~ 9.5 mm F1.2
Power Supply DC12V±10% / AC 24V±10%
Power Consumption IR LED On / 600mA, IR LED Off / 240mA
Operating Temp. 14°F ~ 122°F (-10°C ~ + 50°C)
Operating Humidity 90% RH max.
No. of I.R. LEDs 36 Pieces Infrared LED
Wave Length 850NM
Angles of I.R. LEDs 30°
Viewing Distance Max 100 Feet
Dimensions 73mm (ø) x 122mm (L) / 2.874 in. (ø) x 4.803 in. (L)

8
ISEEE-CAMIR36
R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, [phone]
For Technical Service, [phone]
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2007