NART Access Beachstar User manual

BEACHSTAR WHEELCHAIR
USER GUIDE
Dırective; 2001/ 95/AT
NART Access Disabled and Elderly Elevators Company
Showroom: Mithatpasa Caddesi No: 32/B Narlıdere/IZMIR_TURKEY
Factory: Guzelyurt Mahallesi 5742 Sokak No:51/A Yunusemre/MANISA_TURKEY
T: [phone] F: [phone]
[email protected]
www.nartaccess.com

Product Presentation
The BEACHSTAR is a chair for the transport of elderly and disabled people adapted to the
sea, snow or off-road trekking.
It is provided with a three of wheels designed for an easy transport on the surface (sand,
pebbles, snow).
Because of the construction with aluminum alloy materials that don’t fear the attack of the
salt, with the BEACHSTARyou can enter the water staying comfortably seated.
It is completely demountable to facilitate the transport also in small vehicles.
Specifications
•Weight Capacity: 265lbs [120kg]
•Wheels: 2 pcs x 44 cm in diameter (Big Wheels)
o1 pcs x 29 cm in diameter (Little Wheel)
•Completely disassembling
•Reduced overall dimensions of the frame disassembled
•Frame Material:Aluminum frame/Galvanic treatment and epoxy powder painting
•Footrest : Detachable
•Height x Width x Length= 37cm x 110cm x 59cm
•Product Weight:12.400 kg
•Box weight:14.900 kg
WARNING: It is prohibited to use the Wheelchair or its parts for any purpose other than
that indicated; for a correct use please follow the instructions given in this manual.
NARTACCESS.TR disclaims any responsibility for damages caused by improper use of aids.
WARNING: The information contained in this manual may be subject to change and without
prior notice.
Starting up !
Checks to be made on delivery
•Check for the integrity of the original packaging.
•Check for any anomalies on the shipping documents.
•Check for the functionality and integrity of the device in all its parts, at the time of
delivery or immediately thereafter, to ensure that no damage has resulted from a
careless transport.
•Make sure the surface of the device is not damaged, scratched, bent, etc.

Unpacking
Inside the box there is:
•Backrest with upholstery
•Footrest with upholstery
•Front support
•Anti-tip bar
•Main frame with upholstery and tube fasteners
•N. 3 Pneumatic wheels
•N.3 wheel fasteners
•8 pcs chassis connection pin
•8 pcs chassis connection pin replacement
•Documentation
•Purchased accessories
Mounting the wheelchair
Secure the upholstered back bar, the upholstered stand and the wheeled link bar to the
main frame with the fixing pins as shown in Figure 1.Secure the wheels to the main frame as
shown.Make sure the tubes are properly locked.
Figure 1

Wheels
Insert the wheel on the axis of the chassis as shown in Figure 2.
Use the special housing hole on the hub, previously aligned with the hole present on the axle of the
frame and insert the fastener Make sure each wheel fastener is correctly locked on hub. Removable
45 cm diameter rear wheels, 29 cm diameter front wheel
Figure 2
Figure :big /back wheelchair dimensions
CC
DD
A
A
25 35
88
41
20
449
192
KESIT A-A
BORU BURÇ
GÖBEK PE BURÇBURÇ
25
41
35
9
BORU BURÇ
88
54
36
20
16
7
GÖBEK PE BURÇBURÇ
DETAY B
ÖLÇEK 2 : 5
R216
R210
6
KESIT C-C
ÖLÇEK 1 : 10
R224
R220
4
KESIT D-D
ÖLÇEK 1 : 10
SAYFA NO
PAGE NR
1/1
SON KAYIT TARİHİ: 08 Aralık 2018 Cumartesi 13:32:27
DOSYAYI SON KAYDEDEN: serkan.turan
AĞIRLIK (KG)
MASS (KG)
DOSYA YOLU :C:\Users\serkan.turan\Desktop\HASTA SEDYESİTEKERLERİHASAN BEY\
PARÇA/MONTAJ ADI
PART/ASSEMBLY NAME
ÇiZEN
DRAWN BY
ONAY
APPROVAL
ÖLÇEK
SCALE
KONTROL
CONTROL
RESiM NO
DRAWING NO
---
TARiH
DATE
MiKTAR
QUANTITY
ANTET
FORMAT
08.12.2018
---
1:5
ADI - SOYADI
NAME -SURNAME
iMZA
SING
A3
---
STOK KODU
STOCK CODE
---
MALZEME
MATERIAL
---
---
TEKNiK RESiM AÇIKLAMASI
DRAWING DESCRIPTION
---
Dosya adı: BUYUK
---
1
A
B
C
D
E
F
Dikkat 1- Resim üzerinden ölçü aleti ile ölçü almayın. 2- Formu veya ölçüsüdeğişen resimleri teknik büroya bildirin. 3- Resim üzerinde kontrol edenden başkasıdeğişiklik yapamaz.
8765432

Figure :little/front wheelchair dimensions
Backrest
Insert the backrest into the bushings on the main frame as shown in Figure 3, then insert the
2 fasteners deeply through proper holes to lock it.
Make sure fasteners are correctly locked on main frame. After that fix strip located on the
bottom end of the backrest, passing it around wheels wheels axle as shown in Figure 3
Figure 3
280
A
A170
150
25
120
88
KESIT A-A
ÖLÇEK 1 : 3
SAYFA NO
PAGE NR
1/1
SON KAYIT TARİHİ: 18 Aralık 2018 Salı10:52:16
DOSYAYI SON KAYDEDEN: serkan.turan
AĞIRLIK (KG)
MASS (KG)
DOSYA YOLU :C:\Users\serkan.turan\Desktop\HASTA SEDYESİTEKERLERİHASAN BEY\
PARÇA/MONTAJ ADI
PART/ASSEMBLY NAME
ÇiZEN
DRAWN BY
ONAY
APPROVAL
ÖLÇEK
SCALE
KONTROL
CONTROL
RESiM NO
DRAWING NO
---
TARiH
DATE
MiKTAR
QUANTITY
ANTET
FORMAT
18.12.2018
---
1:5
ADI - SOYADI
NAME -SURNAME
iMZA
SING
A3
---
STOK KODU
STOCK CODE
---
MALZEME
MATERIAL
---
---
TEKNiK RESiM AÇIKLAMASI
DRAWING DESCRIPTION
---
Dosya adı: KÜÇÜK REV
---
1
A
B
C
D
E
F
Dikkat 1- Resim üzerinden ölçü aleti ile ölçü almayın. 2- Formu veya ölçüsüdeğişen resimleri teknik büroya bildirin. 3- Resim üzerinde kontrol edenden başkasıdeğişiklik yapamaz.
8765432

Transport and storage
If you don’t want to use the Job for a long time, store it in a safe place free from dust and
moisture.
If you want to carry the wheelchair, in order to facilitate operations, it is possible to
disassemble it as described in section 2.3 an d put it in the bag available as accessory
.
Figure 4
Adjustments
Legrest adjustment
To adjust the position of legrest, remove the fasteners as shown in Figure 5. Put the legrest
in one of the three available positions and insert again the fasteners.
Figure 5

Dimensions
Figure 6
! ATTENTION : Specifications may change according to the customization of each wheelchair.
Anti-tips bar
To change the anti-tip bar, remove the two fasteners and pull the bar as shown in Figure 7
Insert the new bar in the same position, and be sure to properly insert the fasteners.
Figure 7

Third wheel assembly
To replace the third wheel assembly, unscrew the two bolts (L) shown in Figure 8 using a 5
mm allen wrench, expand the two tubes and remove the wheel.
Insert the new wheel, hook the two tubes and make sure to properly tighten the bolts
previously removed.
Figure 8
Legrest & Backrest Slings
To substitute the footrest ve backrest structure remove the two fasteners and pull the bar as
shown in Figures.Insert the new bar in the same position, and be sure to properly insert the
fasteners
Figure 9

Accessories
The BEACHSTAR can be equipped with many accessories that NARTACCESS.TR it makes
available to meet different customer needs.
Armrests
Assemble the armrest (rh and lh) to the backrest as shown in Figure 10 To ensure a proper
connection tighten the two screws shown in Figure 10 with a 6 mm allen wrench
Figure 10
Warranty terms
BEACHSTAR a product globally guaranteed for 24 months. The warranty covers defects in
materials or workmanship. The warranty doesn’t cover parts subject to usury or damaged
parts by: overload, misuse, alterations and repairs made by unauthorized third parties from
NARTACCESS.TR
The warranty expires in case of tampering, improper storage, unauthorized or incorrect
maintenance.
Security Warning
BEACH STAR DISABLED BEACH CHAIRS PROVIDE DISABLED OR OLD PEOPLE IN THE SEA AND
COMFORTABLE FROM THE SEA, BUT NOT A SANDAL ON THE WATER.PLEASE DO NOT ADVANCED AT
THE SEA OF THE TRANSPORT PERSON.
WHEN CARRYING IN FINE SAND OR STONY AREAS, HOLD THE CHAIR AT THE BOTTLE OF THE
BACKPACK, RECEIVING SUPPORT FROM THE FOOT AND THE FOLLOWING SUPPORT, THROUGH
FORWARD AND BACK FORWARD.ABSOLUTELY DO NOT FORWARD THE CHAIR WITH LOAD WITHOUT
TILTING BACKWARD

Dırective; 2001/ 95/AT
NART Access Disabled and Elderly Elevators Company
Showroom: Mithatpasa Caddesi No: 32/B Narlıdere/IZMIR_TURKEY
Factory: Guzelyurt Mahallesi 5742 Sokak No:51/A Yunusemre /MANISA_TURKEY
T: [phone] F: [phone]
[email protected]
www.nartaccess.com