NASA electric NS-1963 User manual
NS-1963
NS-1963
Blender & Mill
NS-1963
Blender & Mill
.
.
.
.
•
•
•
•
.
.
.
.
.
.
.
.
.
.
.
.
OFF
OFF
.
.
.
.
.
.
.
.
.
.
E A
F B
G C
H D
.
/•
•
•
•
.
.
.
•
.
A
B
CH
D
E
F
G
NS-1963
Blender & Mill
•
•
•
•
•
0
•
•
-
5
•Allow the device motor and materials to
cool.
•Install the mixer lid on its stand to acti-
vate the micro switch.
Use the mill
• Pour a maximum of 60 grams of coffee
beans into the mill.
Grind coffee beans at high speed for 30
seconds.
•Allow the device motor and materials to
cool.
How to clean and maintenance
1. Before cleaning the device, make sure
that the device is off and the speed con-
also unplug the plug.
2. Clean the body of the appliance only
with a dry cloth. Never use a wet tow-
el to do this or immerse the body of the
appliance in water.
3.
blade shaft & mixer arm and mill with wa-
ter and dishwashing liquid.
4. Never use metal wire to clean the de-
vice parts.
5. The device parts is not suitable for
use in the dishwasher.
6. Please make sure all parts are dry
before using the device.
Technical specifications
Power 400 W
Frequency 50 Hz
Voltage 220 V
Guarantee and after sales service
This device has 18 month guarantee and
5 years after sales service, for more in-
formation about guarantee and after sales
service condition please read the guaran-
tee sheet in the end of this user manual or
call +982145114.
NS-1963
Blender & Mill
4
23. Do not overfill the jar.
24. Always operate blender with cover in
place.
25. In the event of an abnormal noise or
severe vibration during operation, please
stop the device and take it to a NASA
Electric after-sales service department
for inspection. Never repair the device
yourself.
26. Do not place the appliance near or
on hot surfaces such as stoves, electric
heaters or hot ovens.
27. To reduce burns, it is best to allow the
device to cool after mixing hot liquids and
before removing and cleaning the parts.
Device parts & accessories
ABlender lid EDevice body
B6-blade shaft FMixer arm
CMixer shaft GAnti-shake base
DBlender jar HMill
How to the install device parts
Warning: When installing and removing the
mixer container, do not touch the 6-blade
shaft as it is too sharp.
1. Place the body of the device on a flat
surface.
2. Place the mixer container on the body of
the device and turn it clockwise to lock it.
3. Place the mixer shaft or 6-blade shaft
the mixer container. Pour the food into
the mixing container.
4. Place the mixer lid on the mixer con-
tainer and turn it clockwise to lock and
activate the Micro switch.
5. The device is ready to use.
Tips on how to use the mixer
•The capacity of the mixer container is 1.7
liters.
Use 6-blade shaft
•Do not pour more than the maximum
level indicator into the mixer container.
•Mix the ingredients at the highest speed
for 1 minute.
• Allow the device motor and materials to
cool before proceeding with the next step.
• The mixer lid is equipped with a safe-
locked in the direction of the arrow spec-
Use the mixer shaft
• Do not pour more than the maximum
level indicator into the mixer container.
• Mix the ingredients at the highest speed
for 1 minute.
12 3 4
A
B
CH
D
E
F
G
3
Important safety warnings
Read these instructions for use carefully
and keep it well.
1. Plug in and make sure the voltage of
home socket is match with this product.
2. This appliance is not intended for use by
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
3. Children shall not play with the appli-
ance.
4. This appliance is intended for home use
and the following:
• Stores, offices and workplaces
• Garden houses
• Hotels & motels
• Places where bed and breakfast facili-
ties are available
5. Before using the appliance for the first
time completely clean parts that contact
foods.
6. If any problems or breakdowns in any
of the components of device, including
the power cable and plug, never use the
appliance and immediately contact one
of the nearest certified NASA Electric af-
ter-sales service centers or send the de-
vice to the center.
7. In case of failure of a part of the de-
vice, do not replace it with similar parts
and makebe sure to contact NASA Elec-
+982145114
8. Please cleaning the appliance use the
dry cloth, do not clean the water for mo-
tor base. It may cause the potential injury
from misuse.
9. Be extremely careful when touching-
handing blade and inserts them in de-
vice, especially while empty the contain-
er cleaning and maintenance after use.
Blender Blades are very sharp.
10. Be careful If hot liquid is poured in-
toa blender, it can cause sudden release
steam to escape. please look after!
11. Unplug the appliance If you do not use
the appliance and before installing and
removing parts, cleaning or handling run-
ning parts of the appliance.
12. Never immerse the power cord and
plug of the appliance in water or any other
liquid, as this will increase the risk of elec-
tric shock.
13. Do not use if the mixing glass container
is broken or cracked for any reason and
contact NASA Electric after-sales service
centers to obtain it.
14. Do not let the cord hang over on the
edge of table or counter or touch hot sur-
faces.
15. Extreme caution must be used when
moving an appliance containing hot oil or
other hot liquids.
16. Where appliance cable, always attach
plug to appliance and check that the con-
trol is off before plugging cord into wall
outlet. To disconnect, turn the control to
off, then remove plug from wall outlet.
17. Avoid contacting moving parts.
18. Keep hands and utensils out of con-
tainer while blending to reduce the risk of
severe injury to persons or damage to the
power blender. A scraper may be used
but must be used only when the blender is
-
19. The vented lid should be remained
in place over the cover opening when
blending hot liquids.
20. Do not try remove the blending jar
from the motor base during the operation.
21. Never operate the device without any
liquid in the jar or empty.
22. Never try to defeat the interlock switch
mechanism, make sure the accessory is
completely installed before operation.
NS-1963
Blender & Mill
Contents Pages
Important safety warnings.................................................................................3
Device parts & accessories................................................................................4
How to the install device parts...........................................................................4
Tips on how to use the mixer.............................................................................4
How to clean and maintenance..........................................................................5
Technical specifications.....................................................................................5
Guarantee and after sales service....................................................................5
Thank you for choosing our product.
This instructions manual has been prepared for you to achieve com-
plete satisfaction and maximum performance from your product read
these instructions carefully before using the appliance and keep the
manual for future reference.
NASA electric Blender & Mill NS-1963 User manual
Table of contents
Languages:
Other NASA electric Blender manuals
