NASAB UW2S User manual

Wichrowa 49 Phone: [phone]
42 280 Czestochowa e-mail: [e-mail]
Poland Internet: www.nasab.com
External Unwinder UW2S
For Sato TH2i Printer
Art. No. 104-20-05
Installation guide.
(If you want to use it as SK version, pls. read Installation guide for SK)
Thank you very much for purchasing the Unwinder UW2S. The Unwinder is
intended for unwinding labels, tickets and tags.
Please be sure to read this information before using the Unwinder.
Verifying 1 pcs Main unit UW2S
contents: 1 pcs Installation Guide
1 plastic bag with screws.
Specification: Bobbin length, 85mm
Label roll size, 38-240mm*
Dimensions: L (max) 300mm
W (max) 120mm
H (max) 150mm
Weight 1,0kg
*240mm when 38mm bobbin core are used.
DECLARATION OF CONFORMITY
CERTIFICATE OF COMPLIANCE
We,
Declare under our sole responsibility that the product
Unwinder Unit
UW2S, UW4S, UW5S, UW6S
To which this declaration relates
Is in conformity with the following standards
Machine Directive:
89/392/EEC, 91/368/EEC, 93/44/EEC, 93/68/EEC
Certifies that all our Unwinder models
UW2S, UW4S, UW5S, UW6S are
compliant with the European Union Directive 2002/95/EC for the
Restriction of the use of Hazardous Substances in Electronic
Equipment (RoHS), and European Union Directive 2002/96/EC
on waste electrical and electronic equipment (WEEE).
No Lead(Pb), Cadmium(Cd), Mercury(Hg), Chromium(Cr), PBB
or PBDE is intentionally added to these devices. Any trace
impurities of these substances contained in the machines are
below the RoHS specified threshold levels.
Pb, Hg, Cr+6, PBB, PBDE <1000 ppm
Cd < 100 ppm
All information provided in this Certificate of Compliance is
accurate, to the best of our knowledge, as of the date this
certification was issued.
Czestochowa, 15 January 2011
………………………… ……………………………………………………………..
J. Austad
Technical Director

Connection: - Put the printer on a table with enough space in rear of it.
-Connect the Unwinder unit bottom sheet and the TH2 Printer
together by the 4 M3 Screws.
- Connect the label roll holder together with the bottom
sheet using the 2 M4 screws.
-Adjust the 2 side guides for your label size.
-Put on the swamp to Printer Handle.
-Start to print.
-If any problem or you want to have help pls. contact
your dealer where you bought the device.