nashi OVIAN PLUS User manual

NASHI OVIAN PLUS
Instruction manual
Thank you for purchasing our INTELLIGENT TOILET.
Please read this manual carefully and use it properly.
Please keep this manual in a safe place and be sure to read it carefully before use.
※Note: This instruction manual includes a service guide.

Table of content
The contents described in this manual include, but are
not limited to, product materials, processes, and
functional characteristics. Please refer to the latest
version of the manual, as the content may differ from
the actual product due to the improvement of the
production process or the update of the product.
Safety precautions
This product is a Class I appliance. Please follow the following precautions for your safety. These precautions
are closely related to the safety of the user's body and property. Please read it carefully and follow it strictly.
Notice to
buyers
The remote control configured in this machine is a full-featured remote control.
Depending on the model you buy, some functions of the remote control may not be
available on this machine.
※ To prevent the danger of arbitrary resetting of the fuse, this product is closed to the fuse. Do not use
that do not meet the product specifications.
※ The schematic meaning is as follows.
fuses
Warning
Attention
Disassembly
is prohibited
Must comply
Indicates the risk of death or serious injury to the user if the product is
mishandled.
Indicates that improper handling of the product may result in injury or
harm to the user.material
It means prohibited. The meaning of the picture on the left is
"disassembly is prohibited."
It means that it must be observed. The meaning of the picture on the
left is "Strictly comply."
Prohibition of disassembly Never disassemble or repair and modify by yourself.
(May cause fire or electric shock.)
Attention
1. This product is an electronic product. Please do not install the product in
splashing water or wet places.
When installed in bathrooms with bathtubs and toilets, please install exhaust fans
and other exhaust equipment to ensure smooth airflow.
(Otherwise, it may lead to fire or electric shock.)
2. Keep the power plug as far away from the bathtub as possible, in a place set
more than 1 meter from the bathtub.
(Otherwise, it may lead to fire or electric shock.)
※Please contact the installation company if you do not have waterproof treatment.
No sprinkling Do not sprinkle water on the main body or power source.
(May result in fire or electric shock.)
Before use
Safety precautions……………… …… 3
Precautions for use………………………………………… 6
The correct way to use…………………………………… 7
Features………………………………………………………… 8
Name of each part of the components……………… 9
Preparation and confirmation before use………… 10
Cleaning method……………………………………………… 12
Troubleshooting and repair…………………………… 14
Service / Repair guide…………………………………… 16
Quality Warranty Card…………………………………… 17
Installation instructions…………………………………… 18
……………………
Cleaning and maintenance
Troubleshooting and repair
Installation instructions
Before use
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Prohibition Attention
It is prohibited to use a product that has malfunctioned.
Unplug the power and close the water valve to terminate the water supply in the
following cases.
Failure refers to.
-When the main body or water pipe is leaking
-When the product is cracked or broken
-When there is an abnormal sound or odor
-When the product emits smoke
-When the product is abnormally hot
It is prohibited to use products that have malfunctioned. Otherwise, it may lead
to fire or electric shock and indoor water seepage.
It is prohibited to use water sources other than tap water or potable water.
Otherwise, it may lead to skin inflammation.
It is prohibited to apply excessive force to the power plug
or to damage it.
It is prohibited to modify or assemble it arbitrarily.
It is prohibited to twist or pull the power cord by force.
It is prohibited to place heavy objects on it.
It is prohibited to use loose or shaky power outlets.
Otherwise, it may lead to fire or electric shock.
It is prohibited to use a power supply or socket beyond the
specification and only use AC220V~ AC power.
Multi-socket outlets are prone to over-specification, which may
lead to heat and cause a fire.
Must
comply
The warm seat may lead to low-temperature burns.
Please turn off the seat temperature switch when sitting on the seat for a long time.
The following groups of people use the warm seat and warm air drying function to
help close the seat to adjust the temperature.
Children, elderly people, and other users who are unable to adjust the
appropriate temperature by themselves.
Those who are not physically free and cannot respond according to their
own consciousness
Those who are taking sleep supplements, those who are alcoholics,
those who are overly tired, etc. who are likely to fall asleep after sitting.
Grounding
Check if the power supply is grounded?
If the power supply is not grounded, it may lead to electric leakage and electric
shock, and other malfunctions.
For grounding work, please contact the nearest electrical installation company.
Attention
Persons with physical, perceptual, or mental ability deficiencies or lack of experience and
common sense should not use this product.
If you want to use it, you must be supervised or instructed by the person in charge of safety
on the use of the product.
Children, the elderly, the physically and mentally disabled, or those who lack experience and
common sense must be accompanied by a guardian before use.
Do not allow children to play with the apparatus to avoid personal or apparatus injury.
Must
comply
No flammable items such as fireworks are placed around the area.
This must be observed, or a fire may result.
Lighted cigarettes and other incendiary materials must not be put
into the toilet to avoid fire!
It is prohibited to plug and unplug the power supply
with wet hands.
Otherwise, it may lead to fire or electric shock.
Prohibited wet
hand touch
It is prohibited to step on the seat, seat cover, and the main body and prohibit the
placement of heavy objects on it.
- Otherwise, the product may be broken, resulting in injury.
- Otherwise, it may make the product break leading to water
seepage in the room.
Prohibition
Prohibition
Must
comply Filter
Water inlet valve
The bathroom room temperature is maintained at a room temperature of not less than 5°C.
- If the water freezes, it may make the drain or the main body break and leak or malfunction.
Make sure to tighten the filter when installing it.
- It may cause water leakage when not installed tightly.
When the product leaks, close the water inlet valve and stop
providing water.
Do not dispose of any debris in the toilet except excrement and toilet paper.
- Otherwise, the toilet may be clogged, or sewage may come out and cause water seepage
in the room.
It is strictly forbidden to dispose of items such as combs and toothbrushes in the toilet.
It is prohibited to stuff fingers or debris in the warm air outlet.
It is prohibited to touch the warm air outlet with hands or cover
it with clothes.
- Otherwise, it may lead to burns or fire.
It is prohibited to bend or flatten the connecting water pipe.
- Otherwise, it may lead to water leakage.
- Otherwise, the water pressure may become low, or no water may come out.
It is prohibited to use kitchen cleaners when cleaning.
- Connecting water pipes should be tightened accurately
otherwise, it may lead to water seepage in the room.
It is prohibited to disconnect the water pipe while the water valve is in operation.
- Otherwise, water may splash.
Before use
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Precautions in use
Please follow the following matters:
Please use a soft cloth with water to wipe
the main body, seat, and seat cover.
Please do not install in direct light.
- It may lead to product discoloration, breakage, and
remote control failure.
Avoid splashing urine on the main body or spout.
- This may cause malfunction.
Do not cover the touch base sensing area and remote
control sensing area.
- This may cause the touch base induction and remote
control to malfunction.
Please disconnect the power when not in use for
a long time.
Please turn off the main power during thunderstorms.
- Not turning it off may result in a lightning strike, causing
personal injury or equipment failure.
Radio and other street ports should be used at a
certain distance from this product.
- This may make noise from the radio.
Do not lean the upper body against the seat cover
when using.
- This may cause defects or breakage of the seat cover.
WEEE Guide
When disposing of products or parts of products as waste, please separate them and dispose of them separately.
In order to prevent damage to the environment and human beings, it is recommended to separate and recycle
resources and reuse them.
Consumers should contact the point of sale where the product was purchased or government
agencies to confirm how to recycle environmentally.
Industrial users should contact the supplier of the product to confirm the purchase conditions.
This product should be disposed of separately from other industrial waste products.
The correct way to use
Use the power saving function
Set the power-saving state, and the seat
temperature is maintained at about 28 ℃.
When there is someone on the seat in the
power-saving state, the power-saving state
is automatically lifted, and the normal
temperature control state is carried out.
Automatic standby
In no operation, no seat temperature, no
seat state, the machine automatically enters
standby mode after 3 minutes. The display
and knob lights go out.
Please close the seat cover
Close the seat cover can prevent the seat
surface heat to the outside and thus save
electricity.
How to use the foot sensor function
There is no operation away from the seat
state, the foot sensor senses an object
blocking the sensing area, and the buzzer
"tick "performs a flush action.
Must comply
Please use tap water for water supply, do not use other water sources other
than tap water that do not meet sanitary standards.
- It will cause inflammation of the cleaning area or equipment failure.
Before use
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

℃
Features
Differentiation
Basic functions
Convenience
functions
Quick functions
Comfort
functions
Safety functions
Auxiliary
functions
Cleaning
functions
Function
Hip washing
Female washing
Powerful laxative
Warm air drying
Adjusting water pressure
Washing position adjustment
Mobile cleaning
Adjustable water temperature
Adjustable seat temperature
Adjustable air temperature
Remote control function
Status display
Foot sensing flushing
Automatic flushing
Remote flush
Power saving
Air bubble cleaning
Warm seat
Seat cover slow lowering
Soft lighting
Deodorization
UV sterilization
Anti-overheating
Anti-leakage
Backup button
Manual flush
Self-check
Nozzle cleaning
Cleaning nozzle button
Anti-fouling treatment
Detailed features
Anal cleaning function
Female-specific cleaning
Washing function for constipation patients
Dry the buttocks with warm air
Water volume and pressure adjustment function
Adjustable washing position function
Multi-directional washing function with moving nozzles front and back
Adjusting water temperature
Adjust the seat temperature
Adjust the warm air temperature
All functions can be operated with one remote control. Easy to use
Indicates the working status of the smart toilet
Execute flushing and other actions by foot covering the foot sensor (optional)
Automatic flushing after people leave the seat
Remote flushing by remote control
Power saving function during non-use
Add bubbles to the washing water to make it softer and more comfortable
Adjustable seat temperature more warm feeling
The use of damping devices to make the seat cover flip smoothly and low noise
LED shimmer lighting toilet, feel cozy when using
Keep the air in the bathroom fresh
UV germicidal lamp through ultraviolet light to kill bacteria, and viruses (optional)
Installed temperature fuse to prevent the water temperature and wind temperature
from being too high and injuring people
Set leakage protection device to eliminate accidents
Button for use when the remote control fails
Flush with manual button in case of power failure (optional)
Self-sensing and reminding when the product has abnormalities
Before and after cleaning, use strong water pressure to clean the nozzle itself
Button for cleaning the nozzle
Anti-soiling treatment inside the toilet
Name of each part of the structure
Seat cover
Main Body
Plug
Water supply pipe
Water inlet valve Strainer
Nozzle
Warm seat
Seat induction
Toilet seat
Foot sensor
Main Body Control Panel
After the seat, release after a short counterclockwise
rotation, turn on the hip cleaning function, time 90
seconds, or press the stop button to end.
Water temperature
indication
Seat temperature
indication
If the short press is in the process of cleaning or
drying, the current function will stop. Long press
the knob to open the drying function.
After seating, no function running, short press the
knob to flush.
Short press the knob to turn on the flush function
when not seated. Long press the knob to turn off,
and long press again to turn on.
After the seat, clockwise short-rotation after release,
open the female cleaning function, duration of 90
seconds, or press the stop button to end.
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Preparation and confirmation before use
Preparation
Installation of the battery
Advice
① Take off the remote control from the hanging frame.
- Push up the remote control by holding both ends with your hands.
② Open the battery cover on the back of the remote control.
③ Install 2 AAA batteries according to the positive and negative battery icon
④ Cover the battery cover
About the battery
To prevent the battery from rupturing or leakage of liquid, please follow
the following items.
- Use two batteries of the same type
- The battery should be removed when not in use for a long time
- Do not use rechargeable batteries
The current settings (temperature, power saving, auto flush) may be released
after replacing the batteries, so please reset them.
Verify that the power plug is plugged in
Advice Unplug the power cord when replacing batteries or repairing
Preparation and confirmation before use
Open the water inlet valve
Counterclockwise rotation
of the handle of the inlet
valve.
Inlet valve handle
Precautions
Confirm knob light
Does the knob light illuminate?
Main Body Control Panel
Before use
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Cleaning method
Daily cleaning method
Clean the main body, commode, and seat cover
Use a water-soaked soft cloth
- Wipe gently with a soft cloth
dampened with water.
When it stains the toilet soap
- Wipe off the toilet soap with a soft cloth
dampened with water and wipe off the
remaining water.
When it is dirty
- Wipe with a soft cloth dampened with
diluted kitchen detergent (neutral).
- Wipe off the remaining water after
cleaning.
Clean the bathroom floor
- Wipe the bathroom floor clean with a
damp towel if there are traces of urine
spilled from the commode or sewage
dropped from the cleaning tools.
Advice
This product is an electronic product. Please pay attention to prevent the
product internal water.
Keep the induction part of the contact base and the induction head of the
remote control clean.
The dirty induction area may cause the set function to operate incorrectly
or not to operate.
Cleaning method
Clean the filter
Please clean the filter when you feel the water column pressure decreases during cleaning.
Please close the water valve and
stop the water supply
Turn the handle of the water inlet valve clockwise.
Disassemble the filter
Split the filter by rotating it counterclockwise.
Attention
It is prohibited to remove the filter
without closing the water valve.
- Water will be ejected.
Prohibited
Filter
Cleaning
Dismantle the filter and clean up any dirt
on the filter.
- Dirt is cleaned up with a toothbrush
and other utensils.
- Dirt such as dust or buildup inside
the water valve is cleaned with a rag.
Reinstall the filter
Reinstall the filter by turning it clockwise.
Attention
The filter must be installed tightly.
- Inadequate tightening during
installation can lead to water leakage.
Must comply
Open the water valve
Turn the handle of the water inlet valve counterclockwise to open the water valve.
- Please check again if there is any water leakage when feeding water.
Advice
Clean the filter
- Do not use any cleaning agent. Clean with water.
- Do not use too much force when cleaning. It may deform the filter.
Cleaning and maintenance
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Troubleshooting and repair
Confirmation matters
Whether the power is out
Whether the power plug
is plugged in
Whether the power is not on
II: Washing the buttocks and washing for women
Troubleshooting and repair
Warning Do not disassemble, repair or modify by yourself except for maintenance technicians.
(May cause fire or electric shock)
When the product works abnormally, please check the following matters, and if you still can't troubleshoot,
please contact our company or local after-sales service department.
I: Body
Phenomenon
It cannot be turned on
Treatment
Please wait until the power
is restored
Please insert the power plug
into the socket
Please turn on the power
Phenomenon
No water can be ejected
Insufficient water temperature
Water stoppage midway
Low water pressure
Confirmation matters
Whether the water is cut off
Whether the angle valve is closed
Whether the nozzle is blocked
by foreign objects
Whether the human seat induction
switch has action
Whether the gear is too low
Whether set to "no heating" state
Whether the wash time to
automatically stop
Whether the human seat sensor
switch has action
Whether the water pressure strength
is in the weak position
Whether the filter is blocked
Whether the inlet pipe is folded
Treatment
Please wait until the water cut is lifted
Please open the angle valve
Please clean the nozzle
Please adjust the sitting position
Please reset the water temperature
Please start the washing function again
Please adjust the sitting position
and restart
Please reset the water pressure
Please clean the water inlet filter part
Restore the pipeline status
III: Drying function
Troubleshooting and repair
Phenomenon
Low warm air temperature
Warm air stops midway
Whether the gear is too low
Whether set to "no heating" state
Whether the drying time to
automatically stop
Whether the human seat induction
switch has action
Confirmation matters
Please reset the air temperature
Please start the drying function again
Please adjust the sitting position
and restart
Treatment
IV: Seat heating
Phenomenon
Not enough seat temperature
Confirmation matters
Whether turn on the power-saving
function
Whether the gear is set too low
Treatment
Exit power-saving function
Reset seat temperature
V: Seat heating
No automatic flushing
Phenomenon Confirmation matters
Whether the water is stopped
Whether the angle valve is closed
Whether the angle valve is blocked
Whether the seat time is shorter
than 10S
Please wait until the water cut is lifted
Please open the angle valve
Please clean the angle valve filter
Please seat time more than 10S
Treatment
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Service / Repair guide
Before requesting a repair, please check each item in the "When you think it's broken" section.
Warranty
- This manual is accompanied by a warranty, which must be filled out at the time of purchase, including
the place of purchase and the date of installation.
When confirming that it is correct, keep it in a safe place.
- The warranty period is 2 years.
Market supply period of accessories for maintenance
- The market supply period for repair parts is 6 years from the date of production of the product.
When requesting repairs during the warranty period
- If the product is still abnormal after reading the manual again and confirming it, please contact the
customer service center and ask for repair.
- When requesting repair, a warranty certificate must be provided.
Content to be provided when contacting
- Address, name, phone number
- Maintenance convenience date
- Product name
- No.
- Installation date
When requesting repair for products that have exceeded the repair period
- Please consult with the place of purchase first.
After the repair or the product has been used normally, the product will be repaired according to the
customer's request for a fee.
Regular checkups recommended (charge)
- For safer, longer and faster use of the product, we recommend giving the product a regular inspection if
it has been installed for more than 3 years.
Breakdown of repair costs (when repair is requested)
The repair fee is composed of [technical fee], [parts fee] and [visit fee].
[ Technical fee ] refers to the cost of doing the inspection of the fault, repair and replacement parts and
inspection after the repair.
[ Parts fee ] is the cost of the parts used in the repair.
[ Visit fee ] is the cost of the technician to and from the location of the fault.
Quality Warranty Card
Our company will guarantee the product quality according to the content of this warranty card.
Please fill out this warranty card and contact our service center when the product fails.
Model
Name :
Company :
Address :
City :
Phone number :
Purchase office (seal) :
Address :
Installation date :
: Code :
Nationality :
E-mail :Fax number :
Warranty period is 2 years
The warranty card must be filled out at the time of purchase, and the style and content must be confirmed
to be correct for safekeeping.
1. If a failure occurs after normal use in accordance with the manual and the contents of the precautions for use,
the repair will be free of charge during the warranty period.
2. Please contact the purchase office or customer service center for repair during the warranty period, and present
the warranty card when repairing.
3. The following cases will be repaired within the warranty period for a fee.
- Failure due to inattention or negligence during use and failure due to improper repair or modification.
- Failure or damage that occurs by moving the installation position.
- Failure and damage occurring due to fire, earthquake, flood, lightning and other natural disasters, public hazards
or abnormal voltage.
- Failure or damage occurring due to the use of non-specified power source (voltage, frequency).
- Failure or damage occurring due to use for purposes other than general household use.
- Cases in which this warranty card cannot be presented.
- When the warranty card is not filled in with the customer's name, place of purchase, date of installation, etc., or
when the contents are modified without permission.
4. This warranty card is valid only in China.
5. This warranty card is no longer issued, please keep it in a safe place.
Free maintenance provisions
Customer rights
The customer has the right to warranty repair in case of failure within 2 years from the date of purchase.
However, in the event of a breakdown due to the customer's fault or an act of nature, we will charge for repairs
even during the warranty period.
About the service
Troubleshooting and repair
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Installation instructions Installation instructions
Safety precautions
The diagram and its meaning are as follows:
Warning
Attention
Prohibited
to disassemble
Must comply
Caution
Must comply
Indicates that improper use of the product may result in death or serious
injury to the user.
Indicates that improper use of the product may result in injury or material
damage to the user.
It is prohibited to split or modify the main body.
Indicates that it is necessary to pass the guard, and the left picture indicates
to avoid the guard strictly.
It is prohibited to step on, hit or place heavy objects on the seat, cover or body.
It may lead to injury or water leakage.
Please use the specified accessories when installing.
Prohibit
Notes on the installation environment
Installation space
Water supply system
Water pressure
The minimum use water pressure is 2'5 bar. If the pressure is not reached, the product cannot flush
dirt out of the toilet.
Please make sure that the opening and closing of the door does not interfere with the installation of the
product while ensuring the space required for installation.
- The water supply pipe should be more than 150mm away from the floor.
- May discolor the wall.
Confirm the location of the water supply and
the position set by the PVC drain pipe before
installation.
Installation drawing (unit: mm)
Construction distance
Annex content
Hanging bracket
Water inlet valve Toilet seat seal Instruction manual Certificate of
conformity
Battery
Installation instructions
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

Specification parameters
Item Content
Rated power supply
Rated power
Maximum power
Applicable water
pressure
Flushing method
Product size
Cleaning device
Cleaning
water flow
Water pressure
strength
Temperature
adjustment
Heater power
Safety device
Seat
Heater power
Temperature
regulation
Buffering device
Safety device
Warm wind
Heater power
Temperature
regulation
Buffering device
220V-50HZ / 110V-60HZ (Refer to production nameplate on toilet)
1280W Inlet water temperature about 15±1., inlet water pressure 0.2Mpa( )
1650W
2'5 bar models require water intake greater than or
equal to 20L/min)
(
Jet siphoning
670*380*460
The water consumption of buttock washing is about 0.5-0.7L/min
The water consumption of gynecological washing is about 0.5-0.7L/min
Four speeds for gynecological and buttock washing
Four grades of room temperature/about 34/about 37/about 40(±1°)
1600W
Water temperature sensor
45W
Four-speed normal temperature/about 34/about 37/about 40 (±2°)
Hydro-mechanical slow descent / multifunctional electric damping
(only with automatic flip-up lid)
Temperature sensor Temperature fuse
270W
Four-speed Normal temperature/approx. 45/approx. 50/approx. 55 (±5°)
Thermal fuse Thermostat
1. Power on state, the knob indicator is red.
2. Human body seated, the knob indicator is white.
3. Hip wash state, the knob indicator is blue.
4. Women's wash state, the knob indicator is green.
5. Drying state, the knob indicator is purple.
Knob indicator description
Product size: 670×380×460mm
Center pit distance of drainage port 305/400mm:
Name of each part
Seat cover
Back cover
Knob
Seat ring
Ceramic body
Foot sensor
Cleaning spray bar
Knob use instructions
After entering the seat, release the knob after a short clockwise rotation, open the female
cleaning function, time 90 seconds, or press the stop button to end.
Short press the knob when not seated to turn on the flush function. Long press the knob to
turn off, and long press again to turn on.
After seating, when no function is running, short press the knob to flush; such as a short press
in the process of cleaning or drying, the current function will stop. Long press the knob to turn
on the drying function.
After entering the seat, release after a short counterclockwise rotation, open the hip cleaning
function, time 90 seconds, or press the stop button to end.
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH

ECO
Remote Control
Hip wash: short press this key to open the hip wash. Wash time 90 seconds; short press
again to enter the mobile wash.
Time to function automatically end, or press the stop button to end.
Instructions for using the remote control
Hip wash Female washing Drying Flap/ring
Water
temperature Seat
temperature Air
temperature Flushing
Washing
position
Washing water
pressure
Energy-saving /
hand cleaning
Child
wash
Pause /
switch Foam
shield
Lighting
Instructions for using the remote control keys
Female washing: short press this key to open the female washing, washing time of 90
seconds; short press again to enter the mobile washing.
Time to the end of the function automatically or press the stop button to end.
Drying: short press this button to open the drying function; open the automatic drying.
After the end of the wash (hip wash, women's wash, child wash) time, automatically run drying.
Flip cover/circle: repeatedly press this button to open and close the seat cover in turn
(only with automatic damping products).
Water temperature: repeated short press this key. The water temperature can be adjusted
from low to high cycle.
Seat temperature: repeatedly press this key. The seat temperature can be adjusted from
low to high cycle.
Wind temperature: repeated short press this key. The wind temperature can be adjusted
from low to high cycle.
Flush: short press this key to start the toilet flush function.
ECO
Instructions for using the remote control
Washing position: after the washing function is turned on, short press this key
to adjust the spray bar forward or backward.
Washing
position
Washing water
pressure
Washing water pressure: after the washing function is turned on, short press
this key to adjust the water size.
Energy-saving / hand clean: long press this key, hand clean state, after the nozzle to the
most remote, self-cleaning mouth drainage, 1 minute after the automatic end of the hand
clean process, press the pause button to exit the hand clean state. Energy-saving default
is off. Short press this key to enter the energy-saving state, and the seat temperature is
set to 34 ℃.
Child wash: short press this key to enter the child wash mode; water temperature and
water pressure are not adjustable in child wash mode.
Lighting: short press to turn on or off the night light.
Foam shield: foam shield is closed by default. In the power-on state, long press this key,
and the buzzer sounds 1 for opening the foam shield function sound 2 for closing the
foam shield function (only for products with foam shield function).
Pause / switch: in the cleaning, drying, and other functions running, short press this key
to stop the corresponding function. Long press this key to open the service shutdown.
INSTALLATION AND USER MANUAL - NASHI OVIAN PLUS - ENGLISH