19200 VonKarman Avenue Suite 350, Irvine, CA92612 USA
© Nature Bright Company.All rights reserved.
Operating Instructions
TO TURN ON THE PER2™
Plug in unit and press button, located beneath time display
TO SET THE TIME
Hold button for 3-5 seconds until the clock indicator is blinking
Press button until the hours are blinking
Use + or - buttons to change the hour to desiredtime
Press again and the minutes will be blinking
Use + or - to change the minutes
Press to save the clock setting
Press and hold button for 3-5 seconds to exit setting. The clock is now set
If nothing is pressed within 30 seconds, all settings will be saved
*All functions can be set while the light is ON or OFF
SETTING DAWNSIMULATOR
Hold button for 3-5 seconds until indicators are blinking
Press button to scroll through
Once the Dawn Simulator indicator is selected, hold until the Hour is blinking
Use + or - to change the hour to desired wake-uptime
Press again and the minutes will be blinking
Use + or - to change the minutes
Press to save the dawn simulator
Press and hold button for 3-5 seconds to exit setting
BACK-UP ALARM
Hold button for 3-5 seconds until indicators are blinking
Press button to scroll through until the indicator is selected
Press and the indicator will be blinking. The Back-up Alarm is now activated
Press again and the indicator will be solid. The Back-up Alarm is now deactivated
Press and hold button for 3-5 seconds to exit setting
*ToSNOOZE for 10 minutes, press button when alarm sounds. Press twice to turn alarm off
ACTIVATING and DEACTIVATINGDAWN SIMULATOR
Hold button for 3-5 seconds until the dawn indicator is blinking
Press button to scroll through
Press to activate Dawn Simulator and the indicator will be blinking
Press again to deactivate. Now the indicator is solid
Press and hold button for 3-5 seconds to exit setting
Dawn Simulator will turn on 30 minutes prior to Wake-uptime
USING THE LIGHT
By using the and arrows you can manually scroll through the different
colour temperatures
will appear when DAWN light is on (5am - 1pm)
will appear when DAYlight is on (1pm - 9pm)
will appear when DUSK light is on (9pm - 5am)
The icon will appear when AUTO-SHIFT setting is activated which will
allow the light to change throughout the day
(factory settings based on sleep lab study)
Tochange the intensity, or brightness, of the light, use + or -
Tochange the brightness of the backlight screen, use + or - when the light
is turned OFF
For AMBIENT light use, simply rotatethe lamp head up to illuminate the
entire room to createa calming, dimly lit, environment
ACTIVATING and DEACTIVATINGDUSK SIMULATOR (Auto Shut-off Feature)
Hold button for 3-5 seconds until the clock indicator is blinking
Press button to scroll through until the indicator is selected
Press to activate Dusk Simulator and the indicator will be blinking
Press again to deactivate. Now the indicator is solid
Press and hold button for 3-5 seconds to exit setting
Once activated, the dusk simulater will act as an automatic shut-off timer when youpress the button.
The light will gradually turn off within 30 minutes.
*Toturn off immediately, press the a second time
Warranty Information
NatureBright Company (“NBC”) warrants that for a period of one year fromdate of purchase, NBC, at its option, will repair or replace this product or any
component of this product foundto be defective. Replacement will be made with a new or remanufactured product or component. If the productis no longer
available, replacement may be made with a similar product of equal or greater value. NBC service centeris the authorized service center for equipment.
Should equipment developany defect within the warranty period, call NBC Service Center for a return authorization code.
To obtain service in the U.S., contact: Nature Bright Company at 1-800-NBC-0231 (1-800-622-0231), Monday–Friday, from 9 a.m. to 5 p.m. PST, or e-mail
[email protected].
This warranty is valid for original retail purchaser fromdate of initial retail purchase and is not transferable. Keep original sales receipt. Proofof purchase required to obtain warranty performance.
LIMITED WARRANTYLIMITS AND EXCLUSIONS
This warranty only coversfailures due to defects in materials or workmanship, and does not cover normal wear and tearor cosmetic damage. This warranty
also does not cover damages occuring in shipment, failurescaused by products not supplied by the warrantor, or failuresresulting from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, setup adjustments, maladjustments of consumer controls,improper maintenance,
powerline surge, lightning damage, modification, introduction of sand, humidity, or liquids, commercial use such as hotel, office, restaurant,orother business
or rental uses of the product, or serviceperformed by anyone other than a Authorized Service Center,or damage attributable to acts of nature.
ALL IMPLIED WARRANTIES,INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY,ARE LIMITED IN DURATION TO
ONE YEAR FROM DATE OF ORIGINAL PURCHASE. UNDER NO CIRCUMSTANCES WILL NBC BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGESFOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY.
This warrantygives you specific legal rights, and you may also have other rights that vary from stateto state. Some states do not allow the exclusion limitation
of incidental or consequential damages or limitations on howlong an implied warranty lasts, so that the above limitations and exclusions may not apply to you.
International WarrantyService Service under the NBC warranty may be obtained outside the U.S. by NatureBright Authorized Distributors and
Service Dealers.
ACCESSORYPURCHASE
Purchase accessories online at naturebright.com,or call 1-800-622-0231. Visa, MasterCard, Discover Card, American Express or check is accepted.
LED
MODEL L6060
DAYLIGHT LAMP
USER GUIDE
Every endeavour has been made to ensure this artwork is correct. Ensure all stations are complete before production. Maintain in good condition.
Do not alter without reference. F
or further information; telephone +64 9 361 2591 fax +64 9 361 2592 e-mail ste
[email protected]PACKAGING > CORPORATE > BRAND IDENTITY
JOB DESCRIPTION
SUPPLIERS PRE-PRODUCTION CHECK DATE
OPERATOR DATE
CLIENT APPROVAL DATE 06.06.13
06.06.13
06.06.13ND
PER2 USER GUIDE
SOFTWARE ILLUST CS
YELLOWCYAN BLACKMAGENTA