Nature's Green NEXTGEN ROOM DIVIDER User manual

NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE
Table of Contents
Page
NextGen Room Divider Components 2
Tools Required 3
Assembly Instructions 3
1

NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE
Components:
2
Base Frame (1)
Poles (2)
M8X1.25X45
One Sided (8)
M8X1.25X65
Two Sided (8)
M10X1.5X40 (4)
M8 Washer
M8X1.25 (8)
(
2Sided−16
1Sided
−
8
)

NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE
Tools Required:
Ratchet
17mm socket
13mm socket
13mm wrench
Assembly Instructions:
Step 1: Screw on wheels/leg levelers until snug
Step 2: Bolt on the polls using M10x1.5x40 bolts provided and a 17mm socket.
Step 3: Connect the grids using provided hardware. See components section for which hardware to use.
Cut grid goes on top.
3
Two Sided One Sided
Two Sided One Sided

NEXTGEN ROOM DIVIDER ASSEMBLY GUIDE
Step 4: Place the base cover over the base frame.
Step 5: Attach drains and leaf screens to trays.
Step 6: Place trays on grid in #4 slots starting from the bottom and working up. The bottom tray should
not have drains.
Step 7: Install side panels using connectors
Step 8: Plant room divider
Step 9: Water room divider
4