Naxa NE-978 User manual

Sport Design True Wireless
Earbuds with Charging Case
NE-978
Instruction Manual
Please read before operating product

2
Table of Contents
Introduction..............................................3
Package Contents...................................3
Safety Instructions...................................4
Product Overview....................................6
How to Use..............................................7
Specications.........................................11
Support..................................................13

2 3
Congratulations, and thank you for choosing Naxa’s
Sport DesignTrue Wireless Bluetooth® Earbuds &
Charging Case. This manual will help you operate your
new device, but rst you should familiarize yourself
with the Bluetooth functionality of your mobile phone
or other external devices before using the Naxa Sport
Design True Wireless Bluetooth® Earbuds & Charging
Case.
Introduction
Package Contents
• NE-978
• USB Charging Cable
• Instruction Manual

4
Safety Instructions
Before using the device, read the operating instructions
very carefully. Keep this operation manual for later
reference.
1. Do not use an appliance for any purpose other than
its intended use.
2. Warning: Do not expose the appliance to extreme
temperatures, to strong temperature uctuations, direct
sunlight or humidity.
3. To prevent any potential auditory damage, do not
listen to music at high volumes for long periods.
4. No naked ame sources, such as lit candles, should
be placed on the appliance.
5. This appliance should be used in temperate climate
only.
6. Electric and electronic equipment should be disposed
of separately. Do not discard used electric and electron-
ic equipment with unsorted municipal waste but have
them collected separately.
7. Attention should be drawn to the environmental
aspects of battery disposal.
8. The appliance contains a battery or batteries that are
non-replaceable.

4 5
9. Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, re
or the like.
10. The battery must be removed from the appliance
before it being disposed of properly.
11. Only remove the rechargeable battery when you
intend to dispose of the appliance. Have the recharge-
able battery removed by trained professionals.
12. CAUTION! Risk of explosion if battery is replaced
by an incorrect type of battery.
13. Dispose of used batteries according to the instruc-
tions

6
Product Overview
1
2
3
4
5
1. Earbud x 2
2. Magnetic Interface
3. Charging Case
4. Power Button
5. Multi-Function Button

6 7
How to Use
TWS Operation
1. Remove the earphones from the charging case
2. Press and hold the Multifunction button on both ear-
buds for 3 seconds until you hear the beep prompt
and the blue and red LEDs start to blink alternately
on both earbuds (Pairing Mode)
3. The TWS earbuds will pair with each other automati-
cally after powering on, the blue and red LEDs keep
blink alternately on one side, and another side will
become blue LED blink slowly (Paired between TWS
earbuds).
Bluetooth® Operation
To use your Bluetooth ® headset, you must rst pair
the TWS with a mobile phone. Once your Bluetooth®
headset is paired with a mobile phone, they will remain
paired and automatically recognize each other whenev-
er they are within range.

8
1. Turn on your phone and ensure the Bluetooth func-
tion is activated.
2. Turn on the earbuds, they will ash red and blue to
signify discovery mode, and initiate a device search
on your phone via the Bluetooth settings menu.
3. Search the Bluetooth® devices on your phone by
following the phone’s instructions. Refer to your
phone’s user manual for more information.
4. After a few seconds the phone will list the “NAXA NE-
977” as a discovered device. Select it and follow your
phone’s instructions to establish a connecton.
5. After a successful connection, the blue light will
blink slowly and a beep prompt will notify you that a
connection has been established.
Playback
1. To play a song through your bluetooth earbuds from
your mobile phone, press the multi-function button
once.
2. To pause playback, press the multi-function button
once again.

8 9
Answering Calls
1. To answer incoming calls, briey press the
multi-function button.
2. To end a call, briey press the multi-function button
again.
3. To reject an incoming call, press and hold the
multi-function button for 2 seconds.
4. To redial a number, press the multi-function button
twice.
Earbud Settings
1. In order to restore the earbuds back to factory set-
tings, rapidly press the multi-function button 6 times.
Charging Earbuds
1. Place earbuds into charging case and press the
power button inside the case to begin charging.
2. The LEDs will show the charging status of the ear-
phones: Red – charging, Blue – fully charged.

10
Charging Case
When fully charged, the case provides 2.5 full charge
to the earphones.
1. Insert the micro-USB connector into the micro-USB
charging port on the back of the case.
2. Connect the USB-A plug on the cable into your
computer or a USB power adapter plugged into a
wall socket.
3. The LED on the charging case will show the charging
status of the case:
White and blinking – charging
White steady – fully charged
4.Disconnect the USB cable when charging is complete.

10 11
Specications
Bluetooth® Version: 5.0
Charging Interface: Micro-USB
Power Input: DC/5V, 0.5A
Working Distance: Up to 33 Ft.
Earbuds Battery Capacity: 40mAh/3.7V
Support: A2DP/AVCTP/AVDTP/AVRCP/HFP
Music Time: Up to 3 Hours
Charging Time: 1-2 Hours (Case), 1-1.5 Hours (Earbuds)
FCC Notice
This device complles with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference,and
(2)this device must accept any interference received,
including interference that may cause undesired
operation.
Note:This equipment has been tested and found to com-
ply with the limits for a class B digital device,pursuant
to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment

12
generates,uses and can radiate radiate radio
frequency energy and,if not installed and used in
accordance with the instructions,may cause harmful
interference to radio communications.However, there is
on guarantee that interference, will not occur in a par-
ticular installation.if this equipment does cause harmful
interference to radio or television reception recep-
tion,which can be-termined by turning the equipment
o󰀨 and on,the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
di󰀨erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV tech-
nician for help.
CAUTION ON MODIFICATIONS
Any changes or modications not expressly approved
by the grantee of this device may void the authority
granted by the FCC to operate the equipment.

12 13
Support
If you have problems with your device, please consult
the instructions in this manual. Please also visit us
on the web at www.naxa.com to get up to the minute
news, alerts, and documentation for your device. For
additional assistance, please contact Naxa Technical
Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/
MADE IN CHINA