Naxa NE-985 User manual

True Wireless Earphones &
Charging Case
NE-985
Instruction Manual
Please read before operating product

2
Table of Contents
Introduction....................................................3
Package Contents.........................................3
Safety Instructions.........................................4
Product Breakdown.......................................6
How to Use....................................................7
Bluetooth Operation.......................................8
Power On/O󰀨.................................................9
Playback......................................................10
Answering Calls...........................................10
Charging Case.............................................11
Specications...............................................12
Support........................................................14

3
Introduction
Congratulations, and thank you for choosing Naxa’s
True Wireless Bluetooth Earphones & Charging
Case. This manual will help you operate your new
device, but rst you should familiarize yourself with
the Bluetooth functionality of your mobile phone or
other external devices before using the Naxa True
Wireless Bluetooth Earphones & Charging Case.
Package Contents
• NE-985
• USB Charging Cable
• Instruction Manual
®
®

4
Safety Instructions
Before using the device, read the operating instruc-
tions very carefully. Keep this operation manual for
later reference.
1. Do not use an appliance for any purpose other
than its intended use.
2. WARNING: Do not expose the appliance to
extreme temperatures, to strong temperature
uctuations, direct sunlight or humidity.
3. To prevent any potential auditory damage, do not
listen to music at high volumes for long periods.
4. No naked ame sources, such as lit candles,
should be placed on the appliance.
5. This appliance should be used in temperate
climate only.
6. Electric and electronic equipment should be dis-
posed of separately. Do not discard used electric
and electronic equipment with unsorted municipal
waste but have them collected separately.
7. Attention should be drawn to the environmental
aspects of battery disposal.

5
8. The appliance contains a battery or batteries that
are non-replaceable.
9. Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat, such as
sunshine, re, or the like.
10. The battery must be removed from the appli-
ance before being disposed of properly.
11. Only remove the rechargeable battery when
you intend to dispose of the appliance. Have
the rechargeable battery removed by trained
professionals.
12. CAUTION: Risk of explosion if battery is re-
placed with the incorrect type of battery.
13. Dispose of used batteries according to the
instructions.

6
Product Breakdown
1. MIC
2. Multi-Function Buttons
3. Earphone Dust Screen
4. Earphones Charging Port
5. Charging Port

7
How to Use
Unpack all parts and check for damage that may
have occurred during transportation. If any parts are
damaged or missing, contact our after-sales service
team. Clean the appliance and its components.
• Fully charge the earphones and the case before
rst use.
• Charge the case rst, or insert the earphones into
the case to charge both at the same time, via the
micro USB charging cable.
• Disconnect the USB cable after charging.
WARNING: Never use detergent, solvents/abrasive
products, scouring pads, abrasive cleaners, sharp
objects or wire brushes to clean the product.
Storage:
• Store the earphones in the charging case.
• Recharge the case regularly when not using it
for extended periods of time (e.g. more than 6
months).

8
1. Remove the earphones from the charging case.
2. Earphones are automatically on and attempting
to pair.
3. Turn on Bluetooth on your connecting (mobile)
device. Search for the earphones on your device
and choose the name ''Naxa E-985'' to connect.
4. After pairing is successful, the blue LEDs on
both earphones will blink slowly, letting you
know a successful connection has been
established.
NOTE: If you have paired the earphones success-
fully, the earphones will automatically reconnect to
the paired device the next time you turn them on
within range of each other and when Bluetooth is
enabled on your mobile device.
Wireless earphones can be connected separately to
other Bluetooth devices.
Bluetooth Operation
®

9
Power On/O󰀨
1. Remove the earphones from the case. The
earphones will automatically turn on, or press
and hold the earphones buttons for 3 seconds to
turn on.
2. Place the earphones into the case, or press and
hold the earphones buttons for 3 seconds to turn
o󰀨.
3. The earphones will automatically power o󰀨 if not
connected with any external devices within 5
minutes of being turned on.

10
Playback
1. To play a song from your mobile phone through
your Bluetooth earphones, press the multi-func-
tion button once.
2. To pause a song, press the multi-function button
once again.
3. To return to the previous song, press the right
earphone button 3 times. To go to the next song,
press the left earphone button 3 times.
4. To turn the volume down, press the right ear-
phone button 2 times. To turn to volume up, press
the left earphone button 2 times.
Answering Calls
1. To answer incoming calls, press the multi-function
button once.
2. To end a call, press the multi-function button
again.
3. To reject an incoming call, press and hold the
multi-function button.

11
Charging Case
When fully charged, the case provides 2.5 full
charges to the earphones.
1. Insert the micro-USB connector into the mi-
cro-USB charging port (5) the back of the
case.
2. Connect the USB-A plug on the cable into your
computer or a USB power adapter plugged into a
wall socket.
3. Disconnect the USB cable when charging is
complete.

12
Specications
Bluetooth Version: 5.0
Earphones battery: 40MAh per single
Charging Case Battery: 300MAh
Transmission Distance: 10m
Frequency: 2.4GHZ
Charging time: 1.5-2 hours
Play time: 3-5 hours
Standby time: About 100 hours
FCC NOTICE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits
®

13
are designed to provide reasonable protection
against harmful interference in a residential installa-
tion. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. How-
ever, there is no guarantee that interference, will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment o󰀨, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
di󰀨erent from that to which the receiver is connect-
ed.
• Consult the dealer or an experienced radio/TV
technician for help.

14
CAUTION ON MODIFICATIONS
Any changes or the modications not expressly
approved by the grantee of this device may void
the authority granted by the FCC to operate
the equipment.
Support
If you have problems with your device, please
consult the instructions in this manual. Please also
visit us on the web at www.naxa.com to get up to
the minute news, alerts, and documentation for your
device. For additional assistance, please contact
Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/naxa_support/
MADE IN CHINA